1Introduction: 2 SM750 of Silicon MOtion is pci express display controller device. 3 The SM750 embedded graphics features include: 4 - dual display 5 - 2D acceleration 6 - 16MB integrated video memory 7 8About the kernel module parameter of driver: 9 10 Use 1280,8bpp index color and 60 hz mode: 11 insmod ./sm750fb.ko g_option="1280x1024-8@60" 12 13 Disable MTRR,Disable 2d acceleration,Disable hardware cursor, 14 and use a 800x600 mode : 15 insmod ./sm750fb.ko g_option="noaccel:nomtrr:nohwc:800x600" 16 17 dual frame buffer for driver with "dual" parameter 18 insmod ./sm750fb.ko g_option="dual,800x600:1024x768" 19 it will create fb0 and fb1 (or fb1,fb2 if fb0 already exist) under /dev 20 and user can use con2fb to link fbX and ttyX 21 22 Notes: 23 1) if you build the driver with built-in method, the parameter 24 you edited in the grub config file will be also the 25 same format as above modular method,but additionally add 26 "video=sm750fb:" 27 ahead of parameters,so,it looks like: 28 video=sm750fb:noaccel,1280x1024@60,otherparam,etc... 29 it equal to modular method with below command: 30 insmod ./sm750fb.ko g_option="noaccel:1280x1024@60:otherparm:etc..." 31 32 2) if you put 800x600 into the parameter without bpp and 33 refresh rate, kernel driver will defaulty use 16bpp and 60hz 34 35Important: 36 if you have vesafb enabled in your config then /dev/fb0 will be created by vesafb 37 and this driver will use fb1, fb2. In that case, you need to configure your X-server 38 to use fb1. Another simple althernative is to disable vesafb from your config. 39