1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Early serial console for 8250/16550 devices
4 *
5 * (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
6 * Bjorn Helgaas <bjorn.helgaas@hp.com>
7 *
8 * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King,
9 * and on early_printk.c by Andi Kleen.
10 *
11 * This is for use before the serial driver has initialized, in
12 * particular, before the UARTs have been discovered and named.
13 * Instead of specifying the console device as, e.g., "ttyS0",
14 * we locate the device directly by its MMIO or I/O port address.
15 *
16 * The user can specify the device directly, e.g.,
17 * earlycon=uart8250,io,0x3f8,9600n8
18 * earlycon=uart8250,mmio,0xff5e0000,115200n8
19 * earlycon=uart8250,mmio32,0xff5e0000,115200n8
20 * or
21 * console=uart8250,io,0x3f8,9600n8
22 * console=uart8250,mmio,0xff5e0000,115200n8
23 * console=uart8250,mmio32,0xff5e0000,115200n8
24 */
25
26 #include <linux/tty.h>
27 #include <linux/init.h>
28 #include <linux/console.h>
29 #include <linux/of.h>
30 #include <linux/of_device.h>
31 #include <linux/serial_reg.h>
32 #include <linux/serial.h>
33 #include <linux/serial_8250.h>
34 #include <asm/io.h>
35 #include <asm/serial.h>
36
serial8250_early_in(struct uart_port * port,int offset)37 static unsigned int serial8250_early_in(struct uart_port *port, int offset)
38 {
39 int reg_offset = offset;
40 offset <<= port->regshift;
41
42 switch (port->iotype) {
43 case UPIO_MEM:
44 return readb(port->membase + offset);
45 case UPIO_MEM16:
46 return readw(port->membase + offset);
47 case UPIO_MEM32:
48 return readl(port->membase + offset);
49 case UPIO_MEM32BE:
50 return ioread32be(port->membase + offset);
51 case UPIO_PORT:
52 return inb(port->iobase + offset);
53 case UPIO_AU:
54 return port->serial_in(port, reg_offset);
55 default:
56 return 0;
57 }
58 }
59
serial8250_early_out(struct uart_port * port,int offset,int value)60 static void serial8250_early_out(struct uart_port *port, int offset, int value)
61 {
62 int reg_offset = offset;
63 offset <<= port->regshift;
64
65 switch (port->iotype) {
66 case UPIO_MEM:
67 writeb(value, port->membase + offset);
68 break;
69 case UPIO_MEM16:
70 writew(value, port->membase + offset);
71 break;
72 case UPIO_MEM32:
73 writel(value, port->membase + offset);
74 break;
75 case UPIO_MEM32BE:
76 iowrite32be(value, port->membase + offset);
77 break;
78 case UPIO_PORT:
79 outb(value, port->iobase + offset);
80 break;
81 case UPIO_AU:
82 port->serial_out(port, reg_offset, value);
83 break;
84 }
85 }
86
serial_putc(struct uart_port * port,unsigned char c)87 static void serial_putc(struct uart_port *port, unsigned char c)
88 {
89 unsigned int status;
90
91 serial8250_early_out(port, UART_TX, c);
92
93 for (;;) {
94 status = serial8250_early_in(port, UART_LSR);
95 if (uart_lsr_tx_empty(status))
96 break;
97 cpu_relax();
98 }
99 }
100
early_serial8250_write(struct console * console,const char * s,unsigned int count)101 static void early_serial8250_write(struct console *console,
102 const char *s, unsigned int count)
103 {
104 struct earlycon_device *device = console->data;
105 struct uart_port *port = &device->port;
106
107 uart_console_write(port, s, count, serial_putc);
108 }
109
110 #ifdef CONFIG_CONSOLE_POLL
early_serial8250_read(struct console * console,char * s,unsigned int count)111 static int early_serial8250_read(struct console *console,
112 char *s, unsigned int count)
113 {
114 struct earlycon_device *device = console->data;
115 struct uart_port *port = &device->port;
116 unsigned int status;
117 int num_read = 0;
118
119 while (num_read < count) {
120 status = serial8250_early_in(port, UART_LSR);
121 if (!(status & UART_LSR_DR))
122 break;
123 s[num_read++] = serial8250_early_in(port, UART_RX);
124 }
125
126 return num_read;
127 }
128 #else
129 #define early_serial8250_read NULL
130 #endif
131
init_port(struct earlycon_device * device)132 static void __init init_port(struct earlycon_device *device)
133 {
134 struct uart_port *port = &device->port;
135 unsigned int divisor;
136 unsigned char c;
137 unsigned int ier;
138
139 serial8250_early_out(port, UART_LCR, 0x3); /* 8n1 */
140 ier = serial8250_early_in(port, UART_IER);
141 serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); /* no interrupt */
142 serial8250_early_out(port, UART_FCR, 0); /* no fifo */
143 serial8250_early_out(port, UART_MCR, 0x3); /* DTR + RTS */
144
145 if (port->uartclk) {
146 divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
147 c = serial8250_early_in(port, UART_LCR);
148 serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB);
149 serial8250_early_out(port, UART_DLL, divisor & 0xff);
150 serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff);
151 serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
152 }
153 }
154
early_serial8250_setup(struct earlycon_device * device,const char * options)155 int __init early_serial8250_setup(struct earlycon_device *device,
156 const char *options)
157 {
158 if (!(device->port.membase || device->port.iobase))
159 return -ENODEV;
160
161 if (!device->baud) {
162 struct uart_port *port = &device->port;
163 unsigned int ier;
164
165 /* assume the device was initialized, only mask interrupts */
166 ier = serial8250_early_in(port, UART_IER);
167 serial8250_early_out(port, UART_IER, ier & UART_IER_UUE);
168 } else
169 init_port(device);
170
171 device->con->write = early_serial8250_write;
172 device->con->read = early_serial8250_read;
173 return 0;
174 }
175 EARLYCON_DECLARE(uart8250, early_serial8250_setup);
176 EARLYCON_DECLARE(uart, early_serial8250_setup);
177 OF_EARLYCON_DECLARE(ns16550, "ns16550", early_serial8250_setup);
178 OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup);
179 OF_EARLYCON_DECLARE(uart, "nvidia,tegra20-uart", early_serial8250_setup);
180 OF_EARLYCON_DECLARE(uart, "snps,dw-apb-uart", early_serial8250_setup);
181
182 #ifdef CONFIG_SERIAL_8250_OMAP
183
early_omap8250_setup(struct earlycon_device * device,const char * options)184 static int __init early_omap8250_setup(struct earlycon_device *device,
185 const char *options)
186 {
187 struct uart_port *port = &device->port;
188
189 if (!(device->port.membase || device->port.iobase))
190 return -ENODEV;
191
192 port->regshift = 2;
193 device->con->write = early_serial8250_write;
194 return 0;
195 }
196
197 OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup);
198 OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
199 OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
200 OF_EARLYCON_DECLARE(omap8250, "ti,am654-uart", early_omap8250_setup);
201
202 #endif
203
204 #ifdef CONFIG_SERIAL_8250_RT288X
205
early_au_setup(struct earlycon_device * dev,const char * opt)206 static int __init early_au_setup(struct earlycon_device *dev, const char *opt)
207 {
208 dev->port.serial_in = au_serial_in;
209 dev->port.serial_out = au_serial_out;
210 dev->port.iotype = UPIO_AU;
211 dev->con->write = early_serial8250_write;
212 return 0;
213 }
214 OF_EARLYCON_DECLARE(palmchip, "ralink,rt2880-uart", early_au_setup);
215
216 #endif
217