1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * bytcr_wm5102.c - ASoc Machine driver for Intel Baytrail platforms with a
4 * Wolfson Microelectronics WM5102 codec
5 *
6 * Copyright (C) 2020 Hans de Goede <hdegoede@redhat.com>
7 * Loosely based on bytcr_rt5640.c which is:
8 * Copyright (C) 2014-2020 Intel Corp
9 * Author: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
10 */
11
12 #include <linux/acpi.h>
13 #include <linux/clk.h>
14 #include <linux/device.h>
15 #include <linux/init.h>
16 #include <linux/module.h>
17 #include <linux/moduleparam.h>
18 #include <linux/platform_device.h>
19 #include <linux/slab.h>
20 #include <linux/spi/spi.h>
21 #include <sound/jack.h>
22 #include <sound/pcm.h>
23 #include <sound/pcm_params.h>
24 #include <sound/soc.h>
25 #include <sound/soc-acpi.h>
26 #include "../../codecs/wm5102.h"
27 #include "../atom/sst-atom-controls.h"
28
29 #define MCLK_FREQ 25000000
30
31 #define WM5102_MAX_SYSCLK_4K 49152000 /* max sysclk for 4K family */
32 #define WM5102_MAX_SYSCLK_11025 45158400 /* max sysclk for 11.025K family */
33
34 struct byt_wm5102_private {
35 struct snd_soc_jack jack;
36 struct clk *mclk;
37 struct gpio_desc *spkvdd_en_gpio;
38 };
39
byt_wm5102_spkvdd_power_event(struct snd_soc_dapm_widget * w,struct snd_kcontrol * kcontrol,int event)40 static int byt_wm5102_spkvdd_power_event(struct snd_soc_dapm_widget *w,
41 struct snd_kcontrol *kcontrol, int event)
42 {
43 struct snd_soc_card *card = w->dapm->card;
44 struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card);
45
46 gpiod_set_value_cansleep(priv->spkvdd_en_gpio,
47 !!SND_SOC_DAPM_EVENT_ON(event));
48
49 return 0;
50 }
51
byt_wm5102_prepare_and_enable_pll1(struct snd_soc_dai * codec_dai,int rate)52 static int byt_wm5102_prepare_and_enable_pll1(struct snd_soc_dai *codec_dai, int rate)
53 {
54 struct snd_soc_component *codec_component = codec_dai->component;
55 int sr_mult = ((rate % 4000) == 0) ?
56 (WM5102_MAX_SYSCLK_4K / rate) :
57 (WM5102_MAX_SYSCLK_11025 / rate);
58 int ret;
59
60 /* Reset FLL1 */
61 snd_soc_dai_set_pll(codec_dai, WM5102_FLL1_REFCLK, ARIZONA_FLL_SRC_NONE, 0, 0);
62 snd_soc_dai_set_pll(codec_dai, WM5102_FLL1, ARIZONA_FLL_SRC_NONE, 0, 0);
63
64 /* Configure the FLL1 PLL before selecting it */
65 ret = snd_soc_dai_set_pll(codec_dai, WM5102_FLL1, ARIZONA_CLK_SRC_MCLK1,
66 MCLK_FREQ, rate * sr_mult);
67 if (ret) {
68 dev_err(codec_component->dev, "Error setting PLL: %d\n", ret);
69 return ret;
70 }
71
72 ret = snd_soc_component_set_sysclk(codec_component, ARIZONA_CLK_SYSCLK,
73 ARIZONA_CLK_SRC_FLL1, rate * sr_mult,
74 SND_SOC_CLOCK_IN);
75 if (ret) {
76 dev_err(codec_component->dev, "Error setting SYSCLK: %d\n", ret);
77 return ret;
78 }
79
80 ret = snd_soc_dai_set_sysclk(codec_dai, ARIZONA_CLK_SYSCLK,
81 rate * 512, SND_SOC_CLOCK_IN);
82 if (ret) {
83 dev_err(codec_component->dev, "Error setting clock: %d\n", ret);
84 return ret;
85 }
86
87 return 0;
88 }
89
platform_clock_control(struct snd_soc_dapm_widget * w,struct snd_kcontrol * k,int event)90 static int platform_clock_control(struct snd_soc_dapm_widget *w,
91 struct snd_kcontrol *k, int event)
92 {
93 struct snd_soc_dapm_context *dapm = w->dapm;
94 struct snd_soc_card *card = dapm->card;
95 struct snd_soc_dai *codec_dai;
96 struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card);
97 int ret;
98
99 codec_dai = snd_soc_card_get_codec_dai(card, "wm5102-aif1");
100 if (!codec_dai) {
101 dev_err(card->dev, "Error codec DAI not found\n");
102 return -EIO;
103 }
104
105 if (SND_SOC_DAPM_EVENT_ON(event)) {
106 ret = clk_prepare_enable(priv->mclk);
107 if (ret) {
108 dev_err(card->dev, "Error enabling MCLK: %d\n", ret);
109 return ret;
110 }
111 ret = byt_wm5102_prepare_and_enable_pll1(codec_dai, 48000);
112 if (ret) {
113 dev_err(card->dev, "Error setting codec sysclk: %d\n", ret);
114 return ret;
115 }
116 } else {
117 /*
118 * The WM5102 has a separate 32KHz clock for jack-detect
119 * so we can disable the PLL, followed by disabling the
120 * platform clock which is the source-clock for the PLL.
121 */
122 snd_soc_dai_set_pll(codec_dai, WM5102_FLL1, ARIZONA_FLL_SRC_NONE, 0, 0);
123 clk_disable_unprepare(priv->mclk);
124 }
125
126 return 0;
127 }
128
129 static const struct snd_soc_dapm_widget byt_wm5102_widgets[] = {
130 SND_SOC_DAPM_HP("Headphone", NULL),
131 SND_SOC_DAPM_MIC("Headset Mic", NULL),
132 SND_SOC_DAPM_MIC("Internal Mic", NULL),
133 SND_SOC_DAPM_SPK("Speaker", NULL),
134 SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
135 platform_clock_control, SND_SOC_DAPM_PRE_PMU |
136 SND_SOC_DAPM_POST_PMD),
137 SND_SOC_DAPM_SUPPLY("Speaker VDD", SND_SOC_NOPM, 0, 0,
138 byt_wm5102_spkvdd_power_event,
139 SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
140 };
141
142 static const struct snd_soc_dapm_route byt_wm5102_audio_map[] = {
143 {"Headphone", NULL, "Platform Clock"},
144 {"Headset Mic", NULL, "Platform Clock"},
145 {"Internal Mic", NULL, "Platform Clock"},
146 {"Speaker", NULL, "Platform Clock"},
147
148 {"Speaker", NULL, "SPKOUTLP"},
149 {"Speaker", NULL, "SPKOUTLN"},
150 {"Speaker", NULL, "SPKOUTRP"},
151 {"Speaker", NULL, "SPKOUTRN"},
152 {"Speaker", NULL, "Speaker VDD"},
153
154 {"Headphone", NULL, "HPOUT1L"},
155 {"Headphone", NULL, "HPOUT1R"},
156
157 {"Internal Mic", NULL, "MICBIAS3"},
158 {"IN3L", NULL, "Internal Mic"},
159
160 /*
161 * The Headset Mix uses MICBIAS1 or 2 depending on if a CTIA/OMTP Headset
162 * is connected, as the MICBIAS is applied after the CTIA/OMTP cross-switch.
163 */
164 {"Headset Mic", NULL, "MICBIAS1"},
165 {"Headset Mic", NULL, "MICBIAS2"},
166 {"IN1L", NULL, "Headset Mic"},
167
168 {"AIF1 Playback", NULL, "ssp0 Tx"},
169 {"ssp0 Tx", NULL, "modem_out"},
170
171 {"modem_in", NULL, "ssp0 Rx"},
172 {"ssp0 Rx", NULL, "AIF1 Capture"},
173 };
174
175 static const struct snd_kcontrol_new byt_wm5102_controls[] = {
176 SOC_DAPM_PIN_SWITCH("Headphone"),
177 SOC_DAPM_PIN_SWITCH("Headset Mic"),
178 SOC_DAPM_PIN_SWITCH("Internal Mic"),
179 SOC_DAPM_PIN_SWITCH("Speaker"),
180 };
181
182 static struct snd_soc_jack_pin byt_wm5102_pins[] = {
183 {
184 .pin = "Headphone",
185 .mask = SND_JACK_HEADPHONE,
186 },
187 {
188 .pin = "Headset Mic",
189 .mask = SND_JACK_MICROPHONE,
190 },
191 };
192
byt_wm5102_init(struct snd_soc_pcm_runtime * runtime)193 static int byt_wm5102_init(struct snd_soc_pcm_runtime *runtime)
194 {
195 struct snd_soc_card *card = runtime->card;
196 struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card);
197 struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component;
198 int ret, jack_type;
199
200 card->dapm.idle_bias_off = true;
201
202 ret = snd_soc_add_card_controls(card, byt_wm5102_controls,
203 ARRAY_SIZE(byt_wm5102_controls));
204 if (ret) {
205 dev_err(card->dev, "Error adding card controls: %d\n", ret);
206 return ret;
207 }
208
209 /*
210 * The firmware might enable the clock at boot (this information
211 * may or may not be reflected in the enable clock register).
212 * To change the rate we must disable the clock first to cover these
213 * cases. Due to common clock framework restrictions that do not allow
214 * to disable a clock that has not been enabled, we need to enable
215 * the clock first.
216 */
217 ret = clk_prepare_enable(priv->mclk);
218 if (!ret)
219 clk_disable_unprepare(priv->mclk);
220
221 ret = clk_set_rate(priv->mclk, MCLK_FREQ);
222 if (ret) {
223 dev_err(card->dev, "Error setting MCLK rate: %d\n", ret);
224 return ret;
225 }
226
227 jack_type = ARIZONA_JACK_MASK | SND_JACK_BTN_0 | SND_JACK_BTN_1 |
228 SND_JACK_BTN_2 | SND_JACK_BTN_3;
229 ret = snd_soc_card_jack_new_pins(card, "Headset", jack_type,
230 &priv->jack, byt_wm5102_pins,
231 ARRAY_SIZE(byt_wm5102_pins));
232 if (ret) {
233 dev_err(card->dev, "Error creating jack: %d\n", ret);
234 return ret;
235 }
236
237 snd_soc_component_set_jack(component, &priv->jack, NULL);
238
239 return 0;
240 }
241
byt_wm5102_codec_fixup(struct snd_soc_pcm_runtime * rtd,struct snd_pcm_hw_params * params)242 static int byt_wm5102_codec_fixup(struct snd_soc_pcm_runtime *rtd,
243 struct snd_pcm_hw_params *params)
244 {
245 struct snd_interval *rate = hw_param_interval(params,
246 SNDRV_PCM_HW_PARAM_RATE);
247 struct snd_interval *channels = hw_param_interval(params,
248 SNDRV_PCM_HW_PARAM_CHANNELS);
249 int ret;
250
251 /* The DSP will covert the FE rate to 48k, stereo */
252 rate->min = 48000;
253 rate->max = 48000;
254 channels->min = 2;
255 channels->max = 2;
256
257 /* set SSP0 to 16-bit */
258 params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
259
260 /*
261 * Default mode for SSP configuration is TDM 4 slot, override config
262 * with explicit setting to I2S 2ch 16-bit. The word length is set with
263 * dai_set_tdm_slot() since there is no other API exposed
264 */
265 ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
266 SND_SOC_DAIFMT_I2S |
267 SND_SOC_DAIFMT_NB_NF |
268 SND_SOC_DAIFMT_BP_FP);
269 if (ret) {
270 dev_err(rtd->dev, "Error setting format to I2S: %d\n", ret);
271 return ret;
272 }
273
274 ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, 16);
275 if (ret) {
276 dev_err(rtd->dev, "Error setting I2S config: %d\n", ret);
277 return ret;
278 }
279
280 return 0;
281 }
282
byt_wm5102_aif1_startup(struct snd_pcm_substream * substream)283 static int byt_wm5102_aif1_startup(struct snd_pcm_substream *substream)
284 {
285 return snd_pcm_hw_constraint_single(substream->runtime,
286 SNDRV_PCM_HW_PARAM_RATE, 48000);
287 }
288
289 static const struct snd_soc_ops byt_wm5102_aif1_ops = {
290 .startup = byt_wm5102_aif1_startup,
291 };
292
293 SND_SOC_DAILINK_DEF(dummy,
294 DAILINK_COMP_ARRAY(COMP_DUMMY()));
295
296 SND_SOC_DAILINK_DEF(media,
297 DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai")));
298
299 SND_SOC_DAILINK_DEF(deepbuffer,
300 DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai")));
301
302 SND_SOC_DAILINK_DEF(ssp0_port,
303 DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port")));
304
305 SND_SOC_DAILINK_DEF(ssp0_codec,
306 DAILINK_COMP_ARRAY(COMP_CODEC(
307 /*
308 * Note there is no need to overwrite the codec-name as is done in
309 * other bytcr machine drivers, because the codec is a MFD child-dev.
310 */
311 "wm5102-codec",
312 "wm5102-aif1")));
313
314 SND_SOC_DAILINK_DEF(platform,
315 DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform")));
316
317 static struct snd_soc_dai_link byt_wm5102_dais[] = {
318 [MERR_DPCM_AUDIO] = {
319 .name = "Baytrail Audio Port",
320 .stream_name = "Baytrail Audio",
321 .nonatomic = true,
322 .dynamic = 1,
323 .dpcm_playback = 1,
324 .dpcm_capture = 1,
325 .ops = &byt_wm5102_aif1_ops,
326 SND_SOC_DAILINK_REG(media, dummy, platform),
327
328 },
329 [MERR_DPCM_DEEP_BUFFER] = {
330 .name = "Deep-Buffer Audio Port",
331 .stream_name = "Deep-Buffer Audio",
332 .nonatomic = true,
333 .dynamic = 1,
334 .dpcm_playback = 1,
335 .ops = &byt_wm5102_aif1_ops,
336 SND_SOC_DAILINK_REG(deepbuffer, dummy, platform),
337 },
338 /* back ends */
339 {
340 /*
341 * This must be named SSP2-Codec even though this machine driver
342 * always uses SSP0. Most machine drivers support both and dynamically
343 * update the dailink to point to SSP0 or SSP2, while keeping the name
344 * as "SSP2-Codec". The SOF tplg files hardcode the "SSP2-Codec" even
345 * in the byt-foo-ssp0.tplg versions because the other machine-drivers
346 * use "SSP2-Codec" even when SSP0 is used.
347 */
348 .name = "SSP2-Codec",
349 .id = 0,
350 .no_pcm = 1,
351 .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
352 | SND_SOC_DAIFMT_CBC_CFC,
353 .be_hw_params_fixup = byt_wm5102_codec_fixup,
354 .dpcm_playback = 1,
355 .dpcm_capture = 1,
356 .init = byt_wm5102_init,
357 SND_SOC_DAILINK_REG(ssp0_port, ssp0_codec, platform),
358 },
359 };
360
361 /* use space before codec name to simplify card ID, and simplify driver name */
362 #define SOF_CARD_NAME "bytcht wm5102" /* card name will be 'sof-bytcht wm5102' */
363 #define SOF_DRIVER_NAME "SOF"
364
365 #define CARD_NAME "bytcr-wm5102"
366 #define DRIVER_NAME NULL /* card name will be used for driver name */
367
368 /* SoC card */
369 static struct snd_soc_card byt_wm5102_card = {
370 .owner = THIS_MODULE,
371 .dai_link = byt_wm5102_dais,
372 .num_links = ARRAY_SIZE(byt_wm5102_dais),
373 .dapm_widgets = byt_wm5102_widgets,
374 .num_dapm_widgets = ARRAY_SIZE(byt_wm5102_widgets),
375 .dapm_routes = byt_wm5102_audio_map,
376 .num_dapm_routes = ARRAY_SIZE(byt_wm5102_audio_map),
377 .fully_routed = true,
378 };
379
snd_byt_wm5102_mc_probe(struct platform_device * pdev)380 static int snd_byt_wm5102_mc_probe(struct platform_device *pdev)
381 {
382 char codec_name[SND_ACPI_I2C_ID_LEN];
383 struct device *dev = &pdev->dev;
384 struct byt_wm5102_private *priv;
385 struct snd_soc_acpi_mach *mach;
386 const char *platform_name;
387 struct acpi_device *adev;
388 struct device *codec_dev;
389 bool sof_parent;
390 int ret;
391
392 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
393 if (!priv)
394 return -ENOMEM;
395
396 /* Get MCLK */
397 priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3");
398 if (IS_ERR(priv->mclk))
399 return dev_err_probe(dev, PTR_ERR(priv->mclk), "getting pmc_plt_clk_3\n");
400
401 /*
402 * Get speaker VDD enable GPIO:
403 * 1. Get codec-device-name
404 * 2. Get codec-device
405 * 3. Get GPIO from codec-device
406 */
407 mach = dev->platform_data;
408 adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1);
409 if (!adev) {
410 dev_err(dev, "Error cannot find acpi-dev for codec\n");
411 return -ENOENT;
412 }
413 snprintf(codec_name, sizeof(codec_name), "spi-%s", acpi_dev_name(adev));
414
415 codec_dev = bus_find_device_by_name(&spi_bus_type, NULL, codec_name);
416 acpi_dev_put(adev);
417 if (!codec_dev)
418 return -EPROBE_DEFER;
419
420 /* Note no devm_ here since we call gpiod_get on codec_dev rather then dev */
421 priv->spkvdd_en_gpio = gpiod_get(codec_dev, "wlf,spkvdd-ena", GPIOD_OUT_LOW);
422 put_device(codec_dev);
423
424 if (IS_ERR(priv->spkvdd_en_gpio)) {
425 ret = PTR_ERR(priv->spkvdd_en_gpio);
426 /*
427 * The spkvdd gpio-lookup is registered by: drivers/mfd/arizona-spi.c,
428 * so -ENOENT means that arizona-spi hasn't probed yet.
429 */
430 if (ret == -ENOENT)
431 ret = -EPROBE_DEFER;
432
433 return dev_err_probe(dev, ret, "getting spkvdd-GPIO\n");
434 }
435
436 /* override platform name, if required */
437 byt_wm5102_card.dev = dev;
438 platform_name = mach->mach_params.platform;
439 ret = snd_soc_fixup_dai_links_platform_name(&byt_wm5102_card, platform_name);
440 if (ret)
441 goto out_put_gpio;
442
443 /* set card and driver name and pm-ops */
444 sof_parent = snd_soc_acpi_sof_parent(dev);
445 if (sof_parent) {
446 byt_wm5102_card.name = SOF_CARD_NAME;
447 byt_wm5102_card.driver_name = SOF_DRIVER_NAME;
448 dev->driver->pm = &snd_soc_pm_ops;
449 } else {
450 byt_wm5102_card.name = CARD_NAME;
451 byt_wm5102_card.driver_name = DRIVER_NAME;
452 }
453
454 snd_soc_card_set_drvdata(&byt_wm5102_card, priv);
455 ret = devm_snd_soc_register_card(dev, &byt_wm5102_card);
456 if (ret) {
457 dev_err_probe(dev, ret, "registering card\n");
458 goto out_put_gpio;
459 }
460
461 platform_set_drvdata(pdev, &byt_wm5102_card);
462 return 0;
463
464 out_put_gpio:
465 gpiod_put(priv->spkvdd_en_gpio);
466 return ret;
467 }
468
snd_byt_wm5102_mc_remove(struct platform_device * pdev)469 static int snd_byt_wm5102_mc_remove(struct platform_device *pdev)
470 {
471 struct snd_soc_card *card = platform_get_drvdata(pdev);
472 struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card);
473
474 gpiod_put(priv->spkvdd_en_gpio);
475 return 0;
476 }
477
478 static struct platform_driver snd_byt_wm5102_mc_driver = {
479 .driver = {
480 .name = "bytcr_wm5102",
481 },
482 .probe = snd_byt_wm5102_mc_probe,
483 .remove = snd_byt_wm5102_mc_remove,
484 };
485
486 module_platform_driver(snd_byt_wm5102_mc_driver);
487
488 MODULE_DESCRIPTION("ASoC Baytrail with WM5102 codec machine driver");
489 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
490 MODULE_LICENSE("GPL v2");
491 MODULE_ALIAS("platform:bytcr_wm5102");
492