1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * comedi/drivers/amplc_pc236.c
4 * Driver for Amplicon PC36AT DIO boards.
5 *
6 * Copyright (C) 2002 MEV Ltd. <https://www.mev.co.uk/>
7 *
8 * COMEDI - Linux Control and Measurement Device Interface
9 * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
10 */
11 /*
12 * Driver: amplc_pc236
13 * Description: Amplicon PC36AT
14 * Author: Ian Abbott <abbotti@mev.co.uk>
15 * Devices: [Amplicon] PC36AT (pc36at)
16 * Updated: Fri, 25 Jul 2014 15:32:40 +0000
17 * Status: works
18 *
19 * Configuration options - PC36AT:
20 * [0] - I/O port base address
21 * [1] - IRQ (optional)
22 *
23 * The PC36AT board has a single 8255 appearing as subdevice 0.
24 *
25 * Subdevice 1 pretends to be a digital input device, but it always returns
26 * 0 when read. However, if you run a command with scan_begin_src=TRIG_EXT,
27 * a rising edge on port C bit 3 acts as an external trigger, which can be
28 * used to wake up tasks. This is like the comedi_parport device, but the
29 * only way to physically disable the interrupt on the PC36AT is to remove
30 * the IRQ jumper. If no interrupt is connected, then subdevice 1 is
31 * unused.
32 */
33
34 #include <linux/module.h>
35 #include <linux/comedi/comedidev.h>
36
37 #include "amplc_pc236.h"
38
pc236_attach(struct comedi_device * dev,struct comedi_devconfig * it)39 static int pc236_attach(struct comedi_device *dev, struct comedi_devconfig *it)
40 {
41 struct pc236_private *devpriv;
42 int ret;
43
44 devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
45 if (!devpriv)
46 return -ENOMEM;
47
48 ret = comedi_request_region(dev, it->options[0], 0x4);
49 if (ret)
50 return ret;
51
52 return amplc_pc236_common_attach(dev, dev->iobase, it->options[1], 0);
53 }
54
55 static const struct pc236_board pc236_boards[] = {
56 {
57 .name = "pc36at",
58 },
59 };
60
61 static struct comedi_driver amplc_pc236_driver = {
62 .driver_name = "amplc_pc236",
63 .module = THIS_MODULE,
64 .attach = pc236_attach,
65 .detach = comedi_legacy_detach,
66 .board_name = &pc236_boards[0].name,
67 .offset = sizeof(struct pc236_board),
68 .num_names = ARRAY_SIZE(pc236_boards),
69 };
70
71 module_comedi_driver(amplc_pc236_driver);
72
73 MODULE_AUTHOR("Comedi https://www.comedi.org");
74 MODULE_DESCRIPTION("Comedi driver for Amplicon PC36AT DIO boards");
75 MODULE_LICENSE("GPL");
76