• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * twl6040-vibra.c - TWL6040 Vibrator driver
4  *
5  * Author:      Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
6  * Author:      Misael Lopez Cruz <misael.lopez@ti.com>
7  *
8  * Copyright:   (C) 2011 Texas Instruments, Inc.
9  *
10  * Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com>
11  *				Felipe Balbi <felipe.balbi@nokia.com>
12  *				Jari Vanhala <ext-javi.vanhala@nokia.com>
13  */
14 #include <linux/module.h>
15 #include <linux/platform_device.h>
16 #include <linux/of.h>
17 #include <linux/workqueue.h>
18 #include <linux/input.h>
19 #include <linux/mfd/twl6040.h>
20 #include <linux/slab.h>
21 #include <linux/delay.h>
22 #include <linux/regulator/consumer.h>
23 
24 #define EFFECT_DIR_180_DEG	0x8000
25 
26 /* Recommended modulation index 85% */
27 #define TWL6040_VIBRA_MOD	85
28 
29 #define TWL6040_NUM_SUPPLIES 2
30 
31 struct vibra_info {
32 	struct device *dev;
33 	struct input_dev *input_dev;
34 	struct work_struct play_work;
35 
36 	int irq;
37 
38 	bool enabled;
39 	int weak_speed;
40 	int strong_speed;
41 	int direction;
42 
43 	unsigned int vibldrv_res;
44 	unsigned int vibrdrv_res;
45 	unsigned int viblmotor_res;
46 	unsigned int vibrmotor_res;
47 
48 	struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES];
49 
50 	struct twl6040 *twl6040;
51 };
52 
twl6040_vib_irq_handler(int irq,void * data)53 static irqreturn_t twl6040_vib_irq_handler(int irq, void *data)
54 {
55 	struct vibra_info *info = data;
56 	struct twl6040 *twl6040 = info->twl6040;
57 	u8 status;
58 
59 	status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
60 	if (status & TWL6040_VIBLOCDET) {
61 		dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
62 		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
63 				   TWL6040_VIBENA);
64 	}
65 	if (status & TWL6040_VIBROCDET) {
66 		dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
67 		twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
68 				   TWL6040_VIBENA);
69 	}
70 
71 	return IRQ_HANDLED;
72 }
73 
twl6040_vibra_enable(struct vibra_info * info)74 static void twl6040_vibra_enable(struct vibra_info *info)
75 {
76 	struct twl6040 *twl6040 = info->twl6040;
77 	int ret;
78 
79 	ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies);
80 	if (ret) {
81 		dev_err(info->dev, "failed to enable regulators %d\n", ret);
82 		return;
83 	}
84 
85 	twl6040_power(info->twl6040, 1);
86 	if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) {
87 		/*
88 		 * ERRATA: Disable overcurrent protection for at least
89 		 * 3ms when enabling vibrator drivers to avoid false
90 		 * overcurrent detection
91 		 */
92 		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
93 				  TWL6040_VIBENA | TWL6040_VIBCTRL);
94 		twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
95 				  TWL6040_VIBENA | TWL6040_VIBCTRL);
96 		usleep_range(3000, 3500);
97 	}
98 
99 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
100 			  TWL6040_VIBENA);
101 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
102 			  TWL6040_VIBENA);
103 
104 	info->enabled = true;
105 }
106 
twl6040_vibra_disable(struct vibra_info * info)107 static void twl6040_vibra_disable(struct vibra_info *info)
108 {
109 	struct twl6040 *twl6040 = info->twl6040;
110 
111 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00);
112 	twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00);
113 	twl6040_power(info->twl6040, 0);
114 
115 	regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies);
116 
117 	info->enabled = false;
118 }
119 
twl6040_vibra_code(int vddvib,int vibdrv_res,int motor_res,int speed,int direction)120 static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res,
121 			     int speed, int direction)
122 {
123 	int vpk, max_code;
124 	u8 vibdat;
125 
126 	/* output swing */
127 	vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) /
128 		(100 * (vibdrv_res + motor_res));
129 
130 	/* 50mV per VIBDAT code step */
131 	max_code = vpk / 50;
132 	if (max_code > TWL6040_VIBDAT_MAX)
133 		max_code = TWL6040_VIBDAT_MAX;
134 
135 	/* scale speed to max allowed code */
136 	vibdat = (u8)((speed * max_code) / USHRT_MAX);
137 
138 	/* 2's complement for direction > 180 degrees */
139 	vibdat *= direction;
140 
141 	return vibdat;
142 }
143 
twl6040_vibra_set_effect(struct vibra_info * info)144 static void twl6040_vibra_set_effect(struct vibra_info *info)
145 {
146 	struct twl6040 *twl6040 = info->twl6040;
147 	u8 vibdatl, vibdatr;
148 	int volt;
149 
150 	/* weak motor */
151 	volt = regulator_get_voltage(info->supplies[0].consumer) / 1000;
152 	vibdatl = twl6040_vibra_code(volt, info->vibldrv_res,
153 				     info->viblmotor_res,
154 				     info->weak_speed, info->direction);
155 
156 	/* strong motor */
157 	volt = regulator_get_voltage(info->supplies[1].consumer) / 1000;
158 	vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res,
159 				     info->vibrmotor_res,
160 				     info->strong_speed, info->direction);
161 
162 	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl);
163 	twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr);
164 }
165 
vibra_play_work(struct work_struct * work)166 static void vibra_play_work(struct work_struct *work)
167 {
168 	struct vibra_info *info = container_of(work,
169 				struct vibra_info, play_work);
170 	int ret;
171 
172 	/* Do not allow effect, while the routing is set to use audio */
173 	ret = twl6040_get_vibralr_status(info->twl6040);
174 	if (ret & TWL6040_VIBSEL) {
175 		dev_info(info->dev, "Vibra is configured for audio\n");
176 		return;
177 	}
178 
179 	if (info->weak_speed || info->strong_speed) {
180 		if (!info->enabled)
181 			twl6040_vibra_enable(info);
182 
183 		twl6040_vibra_set_effect(info);
184 	} else if (info->enabled)
185 		twl6040_vibra_disable(info);
186 
187 }
188 
vibra_play(struct input_dev * input,void * data,struct ff_effect * effect)189 static int vibra_play(struct input_dev *input, void *data,
190 		      struct ff_effect *effect)
191 {
192 	struct vibra_info *info = input_get_drvdata(input);
193 
194 	info->weak_speed = effect->u.rumble.weak_magnitude;
195 	info->strong_speed = effect->u.rumble.strong_magnitude;
196 	info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;
197 
198 	schedule_work(&info->play_work);
199 
200 	return 0;
201 }
202 
twl6040_vibra_close(struct input_dev * input)203 static void twl6040_vibra_close(struct input_dev *input)
204 {
205 	struct vibra_info *info = input_get_drvdata(input);
206 
207 	cancel_work_sync(&info->play_work);
208 
209 	if (info->enabled)
210 		twl6040_vibra_disable(info);
211 }
212 
twl6040_vibra_suspend(struct device * dev)213 static int twl6040_vibra_suspend(struct device *dev)
214 {
215 	struct platform_device *pdev = to_platform_device(dev);
216 	struct vibra_info *info = platform_get_drvdata(pdev);
217 
218 	cancel_work_sync(&info->play_work);
219 
220 	if (info->enabled)
221 		twl6040_vibra_disable(info);
222 
223 	return 0;
224 }
225 
226 static DEFINE_SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops,
227 				twl6040_vibra_suspend, NULL);
228 
twl6040_vibra_probe(struct platform_device * pdev)229 static int twl6040_vibra_probe(struct platform_device *pdev)
230 {
231 	struct device *twl6040_core_dev = pdev->dev.parent;
232 	struct device_node *twl6040_core_node;
233 	struct vibra_info *info;
234 	int vddvibl_uV = 0;
235 	int vddvibr_uV = 0;
236 	int error;
237 
238 	twl6040_core_node = of_get_child_by_name(twl6040_core_dev->of_node,
239 						 "vibra");
240 	if (!twl6040_core_node) {
241 		dev_err(&pdev->dev, "parent of node is missing?\n");
242 		return -EINVAL;
243 	}
244 
245 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
246 	if (!info) {
247 		of_node_put(twl6040_core_node);
248 		dev_err(&pdev->dev, "couldn't allocate memory\n");
249 		return -ENOMEM;
250 	}
251 
252 	info->dev = &pdev->dev;
253 
254 	info->twl6040 = dev_get_drvdata(pdev->dev.parent);
255 
256 	of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
257 			     &info->vibldrv_res);
258 	of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
259 			     &info->vibrdrv_res);
260 	of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
261 			     &info->viblmotor_res);
262 	of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
263 			     &info->vibrmotor_res);
264 	of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV);
265 	of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV);
266 
267 	of_node_put(twl6040_core_node);
268 
269 	if ((!info->vibldrv_res && !info->viblmotor_res) ||
270 	    (!info->vibrdrv_res && !info->vibrmotor_res)) {
271 		dev_err(info->dev, "invalid vibra driver/motor resistance\n");
272 		return -EINVAL;
273 	}
274 
275 	info->irq = platform_get_irq(pdev, 0);
276 	if (info->irq < 0)
277 		return -EINVAL;
278 
279 	error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
280 					  twl6040_vib_irq_handler,
281 					  IRQF_ONESHOT,
282 					  "twl6040_irq_vib", info);
283 	if (error) {
284 		dev_err(info->dev, "VIB IRQ request failed: %d\n", error);
285 		return error;
286 	}
287 
288 	info->supplies[0].supply = "vddvibl";
289 	info->supplies[1].supply = "vddvibr";
290 	/*
291 	 * When booted with Device tree the regulators are attached to the
292 	 * parent device (twl6040 MFD core)
293 	 */
294 	error = devm_regulator_bulk_get(twl6040_core_dev,
295 					ARRAY_SIZE(info->supplies),
296 					info->supplies);
297 	if (error) {
298 		dev_err(info->dev, "couldn't get regulators %d\n", error);
299 		return error;
300 	}
301 
302 	if (vddvibl_uV) {
303 		error = regulator_set_voltage(info->supplies[0].consumer,
304 					      vddvibl_uV, vddvibl_uV);
305 		if (error) {
306 			dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
307 				error);
308 			return error;
309 		}
310 	}
311 
312 	if (vddvibr_uV) {
313 		error = regulator_set_voltage(info->supplies[1].consumer,
314 					      vddvibr_uV, vddvibr_uV);
315 		if (error) {
316 			dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
317 				error);
318 			return error;
319 		}
320 	}
321 
322 	INIT_WORK(&info->play_work, vibra_play_work);
323 
324 	info->input_dev = devm_input_allocate_device(&pdev->dev);
325 	if (!info->input_dev) {
326 		dev_err(info->dev, "couldn't allocate input device\n");
327 		return -ENOMEM;
328 	}
329 
330 	input_set_drvdata(info->input_dev, info);
331 
332 	info->input_dev->name = "twl6040:vibrator";
333 	info->input_dev->id.version = 1;
334 	info->input_dev->close = twl6040_vibra_close;
335 	__set_bit(FF_RUMBLE, info->input_dev->ffbit);
336 
337 	error = input_ff_create_memless(info->input_dev, NULL, vibra_play);
338 	if (error) {
339 		dev_err(info->dev, "couldn't register vibrator to FF\n");
340 		return error;
341 	}
342 
343 	error = input_register_device(info->input_dev);
344 	if (error) {
345 		dev_err(info->dev, "couldn't register input device\n");
346 		return error;
347 	}
348 
349 	platform_set_drvdata(pdev, info);
350 
351 	return 0;
352 }
353 
354 static struct platform_driver twl6040_vibra_driver = {
355 	.probe		= twl6040_vibra_probe,
356 	.driver		= {
357 		.name	= "twl6040-vibra",
358 		.pm	= pm_sleep_ptr(&twl6040_vibra_pm_ops),
359 	},
360 };
361 module_platform_driver(twl6040_vibra_driver);
362 
363 MODULE_ALIAS("platform:twl6040-vibra");
364 MODULE_DESCRIPTION("TWL6040 Vibra driver");
365 MODULE_LICENSE("GPL");
366 MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
367 MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");
368