1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller
4 *
5 * Copyright (C) 2009 Samsung Electronics Co.Ltd
6 * Author: Joonyoung Shim <jy0922.shim@samsung.com>
7 *
8 * Based on wm97xx-core.c
9 */
10
11 #include <linux/module.h>
12 #include <linux/i2c.h>
13 #include <linux/interrupt.h>
14 #include <linux/input.h>
15 #include <linux/irq.h>
16 #include <linux/platform_data/mcs.h>
17 #include <linux/slab.h>
18
19 /* Registers */
20 #define MCS5000_TS_STATUS 0x00
21 #define STATUS_OFFSET 0
22 #define STATUS_NO (0 << STATUS_OFFSET)
23 #define STATUS_INIT (1 << STATUS_OFFSET)
24 #define STATUS_SENSING (2 << STATUS_OFFSET)
25 #define STATUS_COORD (3 << STATUS_OFFSET)
26 #define STATUS_GESTURE (4 << STATUS_OFFSET)
27 #define ERROR_OFFSET 4
28 #define ERROR_NO (0 << ERROR_OFFSET)
29 #define ERROR_POWER_ON_RESET (1 << ERROR_OFFSET)
30 #define ERROR_INT_RESET (2 << ERROR_OFFSET)
31 #define ERROR_EXT_RESET (3 << ERROR_OFFSET)
32 #define ERROR_INVALID_REG_ADDRESS (8 << ERROR_OFFSET)
33 #define ERROR_INVALID_REG_VALUE (9 << ERROR_OFFSET)
34
35 #define MCS5000_TS_OP_MODE 0x01
36 #define RESET_OFFSET 0
37 #define RESET_NO (0 << RESET_OFFSET)
38 #define RESET_EXT_SOFT (1 << RESET_OFFSET)
39 #define OP_MODE_OFFSET 1
40 #define OP_MODE_SLEEP (0 << OP_MODE_OFFSET)
41 #define OP_MODE_ACTIVE (1 << OP_MODE_OFFSET)
42 #define GESTURE_OFFSET 4
43 #define GESTURE_DISABLE (0 << GESTURE_OFFSET)
44 #define GESTURE_ENABLE (1 << GESTURE_OFFSET)
45 #define PROXIMITY_OFFSET 5
46 #define PROXIMITY_DISABLE (0 << PROXIMITY_OFFSET)
47 #define PROXIMITY_ENABLE (1 << PROXIMITY_OFFSET)
48 #define SCAN_MODE_OFFSET 6
49 #define SCAN_MODE_INTERRUPT (0 << SCAN_MODE_OFFSET)
50 #define SCAN_MODE_POLLING (1 << SCAN_MODE_OFFSET)
51 #define REPORT_RATE_OFFSET 7
52 #define REPORT_RATE_40 (0 << REPORT_RATE_OFFSET)
53 #define REPORT_RATE_80 (1 << REPORT_RATE_OFFSET)
54
55 #define MCS5000_TS_SENS_CTL 0x02
56 #define MCS5000_TS_FILTER_CTL 0x03
57 #define PRI_FILTER_OFFSET 0
58 #define SEC_FILTER_OFFSET 4
59
60 #define MCS5000_TS_X_SIZE_UPPER 0x08
61 #define MCS5000_TS_X_SIZE_LOWER 0x09
62 #define MCS5000_TS_Y_SIZE_UPPER 0x0A
63 #define MCS5000_TS_Y_SIZE_LOWER 0x0B
64
65 #define MCS5000_TS_INPUT_INFO 0x10
66 #define INPUT_TYPE_OFFSET 0
67 #define INPUT_TYPE_NONTOUCH (0 << INPUT_TYPE_OFFSET)
68 #define INPUT_TYPE_SINGLE (1 << INPUT_TYPE_OFFSET)
69 #define INPUT_TYPE_DUAL (2 << INPUT_TYPE_OFFSET)
70 #define INPUT_TYPE_PALM (3 << INPUT_TYPE_OFFSET)
71 #define INPUT_TYPE_PROXIMITY (7 << INPUT_TYPE_OFFSET)
72 #define GESTURE_CODE_OFFSET 3
73 #define GESTURE_CODE_NO (0 << GESTURE_CODE_OFFSET)
74
75 #define MCS5000_TS_X_POS_UPPER 0x11
76 #define MCS5000_TS_X_POS_LOWER 0x12
77 #define MCS5000_TS_Y_POS_UPPER 0x13
78 #define MCS5000_TS_Y_POS_LOWER 0x14
79 #define MCS5000_TS_Z_POS 0x15
80 #define MCS5000_TS_WIDTH 0x16
81 #define MCS5000_TS_GESTURE_VAL 0x17
82 #define MCS5000_TS_MODULE_REV 0x20
83 #define MCS5000_TS_FIRMWARE_VER 0x21
84
85 /* Touchscreen absolute values */
86 #define MCS5000_MAX_XC 0x3ff
87 #define MCS5000_MAX_YC 0x3ff
88
89 enum mcs5000_ts_read_offset {
90 READ_INPUT_INFO,
91 READ_X_POS_UPPER,
92 READ_X_POS_LOWER,
93 READ_Y_POS_UPPER,
94 READ_Y_POS_LOWER,
95 READ_BLOCK_SIZE,
96 };
97
98 /* Each client has this additional data */
99 struct mcs5000_ts_data {
100 struct i2c_client *client;
101 struct input_dev *input_dev;
102 const struct mcs_platform_data *platform_data;
103 };
104
mcs5000_ts_interrupt(int irq,void * dev_id)105 static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
106 {
107 struct mcs5000_ts_data *data = dev_id;
108 struct i2c_client *client = data->client;
109 u8 buffer[READ_BLOCK_SIZE];
110 int err;
111 int x;
112 int y;
113
114 err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO,
115 READ_BLOCK_SIZE, buffer);
116 if (err < 0) {
117 dev_err(&client->dev, "%s, err[%d]\n", __func__, err);
118 goto out;
119 }
120
121 switch (buffer[READ_INPUT_INFO]) {
122 case INPUT_TYPE_NONTOUCH:
123 input_report_key(data->input_dev, BTN_TOUCH, 0);
124 input_sync(data->input_dev);
125 break;
126
127 case INPUT_TYPE_SINGLE:
128 x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER];
129 y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER];
130
131 input_report_key(data->input_dev, BTN_TOUCH, 1);
132 input_report_abs(data->input_dev, ABS_X, x);
133 input_report_abs(data->input_dev, ABS_Y, y);
134 input_sync(data->input_dev);
135 break;
136
137 case INPUT_TYPE_DUAL:
138 /* TODO */
139 break;
140
141 case INPUT_TYPE_PALM:
142 /* TODO */
143 break;
144
145 case INPUT_TYPE_PROXIMITY:
146 /* TODO */
147 break;
148
149 default:
150 dev_err(&client->dev, "Unknown ts input type %d\n",
151 buffer[READ_INPUT_INFO]);
152 break;
153 }
154
155 out:
156 return IRQ_HANDLED;
157 }
158
mcs5000_ts_phys_init(struct mcs5000_ts_data * data,const struct mcs_platform_data * platform_data)159 static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data,
160 const struct mcs_platform_data *platform_data)
161 {
162 struct i2c_client *client = data->client;
163
164 /* Touch reset & sleep mode */
165 i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE,
166 RESET_EXT_SOFT | OP_MODE_SLEEP);
167
168 /* Touch size */
169 i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER,
170 platform_data->x_size >> 8);
171 i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER,
172 platform_data->x_size & 0xff);
173 i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER,
174 platform_data->y_size >> 8);
175 i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER,
176 platform_data->y_size & 0xff);
177
178 /* Touch active mode & 80 report rate */
179 i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE,
180 OP_MODE_ACTIVE | REPORT_RATE_80);
181 }
182
mcs5000_ts_probe(struct i2c_client * client)183 static int mcs5000_ts_probe(struct i2c_client *client)
184 {
185 const struct mcs_platform_data *pdata;
186 struct mcs5000_ts_data *data;
187 struct input_dev *input_dev;
188 int error;
189
190 pdata = dev_get_platdata(&client->dev);
191 if (!pdata)
192 return -EINVAL;
193
194 data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
195 if (!data) {
196 dev_err(&client->dev, "Failed to allocate memory\n");
197 return -ENOMEM;
198 }
199
200 data->client = client;
201
202 input_dev = devm_input_allocate_device(&client->dev);
203 if (!input_dev) {
204 dev_err(&client->dev, "Failed to allocate input device\n");
205 return -ENOMEM;
206 }
207
208 input_dev->name = "MELFAS MCS-5000 Touchscreen";
209 input_dev->id.bustype = BUS_I2C;
210 input_dev->dev.parent = &client->dev;
211
212 __set_bit(EV_ABS, input_dev->evbit);
213 __set_bit(EV_KEY, input_dev->evbit);
214 __set_bit(BTN_TOUCH, input_dev->keybit);
215 input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0);
216 input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0);
217
218 data->input_dev = input_dev;
219
220 if (pdata->cfg_pin)
221 pdata->cfg_pin();
222
223 error = devm_request_threaded_irq(&client->dev, client->irq,
224 NULL, mcs5000_ts_interrupt,
225 IRQF_TRIGGER_LOW | IRQF_ONESHOT,
226 "mcs5000_ts", data);
227 if (error) {
228 dev_err(&client->dev, "Failed to register interrupt\n");
229 return error;
230 }
231
232 error = input_register_device(data->input_dev);
233 if (error) {
234 dev_err(&client->dev, "Failed to register input device\n");
235 return error;
236 }
237
238 mcs5000_ts_phys_init(data, pdata);
239 i2c_set_clientdata(client, data);
240
241 return 0;
242 }
243
mcs5000_ts_suspend(struct device * dev)244 static int mcs5000_ts_suspend(struct device *dev)
245 {
246 struct i2c_client *client = to_i2c_client(dev);
247
248 /* Touch sleep mode */
249 i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP);
250
251 return 0;
252 }
253
mcs5000_ts_resume(struct device * dev)254 static int mcs5000_ts_resume(struct device *dev)
255 {
256 struct i2c_client *client = to_i2c_client(dev);
257 struct mcs5000_ts_data *data = i2c_get_clientdata(client);
258 const struct mcs_platform_data *pdata = dev_get_platdata(dev);
259
260 mcs5000_ts_phys_init(data, pdata);
261
262 return 0;
263 }
264
265 static DEFINE_SIMPLE_DEV_PM_OPS(mcs5000_ts_pm,
266 mcs5000_ts_suspend, mcs5000_ts_resume);
267
268 static const struct i2c_device_id mcs5000_ts_id[] = {
269 { "mcs5000_ts", 0 },
270 { }
271 };
272 MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id);
273
274 static struct i2c_driver mcs5000_ts_driver = {
275 .probe = mcs5000_ts_probe,
276 .driver = {
277 .name = "mcs5000_ts",
278 .pm = pm_sleep_ptr(&mcs5000_ts_pm),
279 },
280 .id_table = mcs5000_ts_id,
281 };
282
283 module_i2c_driver(mcs5000_ts_driver);
284
285 /* Module information */
286 MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
287 MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller");
288 MODULE_LICENSE("GPL");
289