1# SPDX-License-Identifier: GPL-2.0-only 2config STMMAC_ETH 3 tristate "STMicroelectronics Multi-Gigabit Ethernet driver" 4 depends on HAS_IOMEM && HAS_DMA 5 depends on PTP_1588_CLOCK_OPTIONAL 6 select MII 7 select PCS_XPCS 8 select PAGE_POOL 9 select PHYLINK 10 select CRC32 11 select RESET_CONTROLLER 12 help 13 This is the driver for the Ethernet IPs built around a 14 Synopsys IP Core. 15 16if STMMAC_ETH 17 18config STMMAC_SELFTESTS 19 bool "Support for STMMAC Selftests" 20 depends on INET 21 depends on STMMAC_ETH 22 default n 23 help 24 This adds support for STMMAC Selftests using ethtool. Enable this 25 feature if you are facing problems with your HW and submit the test 26 results to the netdev Mailing List. 27 28config STMMAC_PLATFORM 29 tristate "STMMAC Platform bus support" 30 depends on STMMAC_ETH 31 select MFD_SYSCON 32 default y 33 help 34 This selects the platform specific bus support for the stmmac driver. 35 This is the driver used on several SoCs: 36 STi, Allwinner, Amlogic Meson, Altera SOCFPGA. 37 38 If you have a controller with this interface, say Y or M here. 39 40 If unsure, say N. 41 42if STMMAC_PLATFORM 43 44config DWMAC_DWC_QOS_ETH 45 tristate "Support for snps,dwc-qos-ethernet.txt DT binding." 46 select CRC32 47 select MII 48 depends on OF && HAS_DMA 49 help 50 Support for chips using the snps,dwc-qos-ethernet.txt DT binding. 51 52config DWMAC_GENERIC 53 tristate "Generic driver for DWMAC" 54 default STMMAC_PLATFORM 55 help 56 Generic DWMAC driver for platforms that don't require any 57 platform specific code to function or is using platform 58 data for setup. 59 60config DWMAC_ANARION 61 tristate "Adaptrum Anarion GMAC support" 62 default ARC 63 depends on OF && (ARC || COMPILE_TEST) 64 help 65 Support for Adaptrum Anarion GMAC Ethernet controller. 66 67 This selects the Anarion SoC glue layer support for the stmmac driver. 68 69config DWMAC_INGENIC 70 tristate "Ingenic MAC support" 71 default MACH_INGENIC 72 depends on OF && HAS_IOMEM && (MACH_INGENIC || COMPILE_TEST) 73 select MFD_SYSCON 74 help 75 Support for ethernet controller on Ingenic SoCs. 76 77 This selects Ingenic SoCs glue layer support for the stmmac 78 device driver. This driver is used on for the Ingenic SoCs 79 MAC ethernet controller. 80 81config DWMAC_IPQ806X 82 tristate "QCA IPQ806x DWMAC support" 83 default ARCH_QCOM 84 depends on OF && (ARCH_QCOM || COMPILE_TEST) 85 select MFD_SYSCON 86 help 87 Support for QCA IPQ806X DWMAC Ethernet. 88 89 This selects the IPQ806x SoC glue layer support for the stmmac 90 device driver. This driver does not use any of the hardware 91 acceleration features available on this SoC. Network devices 92 will behave like standard non-accelerated ethernet interfaces. 93 94 Select the QCOM_SOCINFO config flag to enable specific dwmac 95 fixup based on the ipq806x SoC revision. 96 97config DWMAC_LPC18XX 98 tristate "NXP LPC18xx/43xx DWMAC support" 99 default ARCH_LPC18XX 100 depends on OF && (ARCH_LPC18XX || COMPILE_TEST) 101 select MFD_SYSCON 102 help 103 Support for NXP LPC18xx/43xx DWMAC Ethernet. 104 105config DWMAC_MEDIATEK 106 tristate "MediaTek MT27xx GMAC support" 107 depends on OF && (ARCH_MEDIATEK || COMPILE_TEST) 108 help 109 Support for MediaTek GMAC Ethernet controller. 110 111 This selects the MT2712 SoC support for the stmmac driver. 112 113config DWMAC_MESON 114 tristate "Amlogic Meson dwmac support" 115 default ARCH_MESON 116 depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST) 117 help 118 Support for Ethernet controller on Amlogic Meson SoCs. 119 120 This selects the Amlogic Meson SoC glue layer support for 121 the stmmac device driver. This driver is used for Meson6, 122 Meson8, Meson8b and GXBB SoCs. 123 124config DWMAC_QCOM_ETHQOS 125 tristate "Qualcomm ETHQOS support" 126 default ARCH_QCOM 127 depends on OF && (ARCH_QCOM || COMPILE_TEST) 128 help 129 Support for the Qualcomm ETHQOS core. 130 131 This selects the Qualcomm ETHQOS glue layer support for the 132 stmmac device driver. 133 134config DWMAC_ROCKCHIP 135 tristate "Rockchip dwmac support" 136 default ARCH_ROCKCHIP 137 depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) 138 select MFD_SYSCON 139 help 140 Support for Ethernet controller on Rockchip RK3288 SoC. 141 142 This selects the Rockchip RK3288 SoC glue layer support for 143 the stmmac device driver. 144 145config DWMAC_SOCFPGA 146 tristate "SOCFPGA dwmac support" 147 default ARCH_INTEL_SOCFPGA 148 depends on OF && (ARCH_INTEL_SOCFPGA || COMPILE_TEST) 149 select MFD_SYSCON 150 select MDIO_REGMAP 151 select REGMAP_MMIO 152 select PCS_LYNX 153 help 154 Support for ethernet controller on Altera SOCFPGA 155 156 This selects the Altera SOCFPGA SoC glue layer support 157 for the stmmac device driver. This driver is used for 158 arria5 and cyclone5 FPGA SoCs. 159 160config DWMAC_STARFIVE 161 tristate "StarFive dwmac support" 162 depends on OF && (ARCH_STARFIVE || COMPILE_TEST) 163 select MFD_SYSCON 164 default m if ARCH_STARFIVE 165 help 166 Support for ethernet controllers on StarFive RISC-V SoCs 167 168 This selects the StarFive platform specific glue layer support 169 for the stmmac device driver. This driver is used for the 170 StarFive JH7100 and JH7110 ethernet controllers. 171 172config DWMAC_STI 173 tristate "STi GMAC support" 174 default ARCH_STI 175 depends on OF && (ARCH_STI || COMPILE_TEST) 176 select MFD_SYSCON 177 help 178 Support for ethernet controller on STi SOCs. 179 180 This selects STi SoC glue layer support for the stmmac 181 device driver. This driver is used on for the STi series 182 SOCs GMAC ethernet controller. 183 184config DWMAC_STM32 185 tristate "STM32 DWMAC support" 186 default ARCH_STM32 187 depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST) 188 select MFD_SYSCON 189 help 190 Support for ethernet controller on STM32 SOCs. 191 192 This selects STM32 SoC glue layer support for the stmmac 193 device driver. This driver is used on for the STM32 series 194 SOCs GMAC ethernet controller. 195 196config DWMAC_SUNXI 197 tristate "Allwinner GMAC support" 198 default ARCH_SUNXI 199 depends on OF && (ARCH_SUNXI || COMPILE_TEST) 200 help 201 Support for Allwinner A20/A31 GMAC ethernet controllers. 202 203 This selects Allwinner SoC glue layer support for the 204 stmmac device driver. This driver is used for A20/A31 205 GMAC ethernet controller. 206 207config DWMAC_SUN8I 208 tristate "Allwinner sun8i GMAC support" 209 default ARCH_SUNXI 210 depends on OF && (ARCH_SUNXI || COMPILE_TEST) 211 select MDIO_BUS_MUX 212 help 213 Support for Allwinner H3 A83T A64 EMAC ethernet controllers. 214 215 This selects Allwinner SoC glue layer support for the 216 stmmac device driver. This driver is used for H3/A83T/A64 217 EMAC ethernet controller. 218 219config DWMAC_IMX8 220 tristate "NXP IMX8 DWMAC support" 221 default ARCH_MXC 222 depends on OF && (ARCH_MXC || COMPILE_TEST) 223 select MFD_SYSCON 224 help 225 Support for ethernet controller on NXP i.MX8 SOCs. 226 227 This selects NXP SoC glue layer support for the stmmac 228 device driver. This driver is used for i.MX8 series like 229 iMX8MP/iMX8DXL GMAC ethernet controller. 230 231config DWMAC_INTEL_PLAT 232 tristate "Intel dwmac support" 233 depends on OF && COMMON_CLK 234 depends on STMMAC_ETH 235 help 236 Support for ethernet controllers on Intel SoCs 237 238 This selects the Intel platform specific glue layer support for 239 the stmmac device driver. This driver is used for the Intel Keem Bay 240 SoC. 241 242config DWMAC_TEGRA 243 tristate "NVIDIA Tegra MGBE support" 244 depends on ARCH_TEGRA || COMPILE_TEST 245 help 246 This selects the Multi-GigaBit Ethernet (MGBE) Controller that is 247 found on the NVIDIA Tegra SoC devices. This driver provides the glue 248 layer on top of the stmmac driver required for these NVIDIA Tegra SoC 249 devices. 250 251config DWMAC_VISCONTI 252 tristate "Toshiba Visconti DWMAC support" 253 default ARCH_VISCONTI 254 depends on OF && COMMON_CLK && (ARCH_VISCONTI || COMPILE_TEST) 255 help 256 Support for ethernet controller on Visconti SoCs. 257 258endif 259 260config DWMAC_INTEL 261 tristate "Intel GMAC support" 262 default X86 263 depends on X86 && STMMAC_ETH && PCI 264 depends on COMMON_CLK 265 help 266 This selects the Intel platform specific bus support for the 267 stmmac driver. This driver is used for Intel Quark/EHL/TGL. 268 269config DWMAC_LOONGSON 270 tristate "Loongson PCI DWMAC support" 271 default MACH_LOONGSON64 272 depends on (MACH_LOONGSON64 || COMPILE_TEST) && STMMAC_ETH && PCI 273 depends on COMMON_CLK 274 help 275 This selects the LOONGSON PCI bus support for the stmmac driver, 276 Support for ethernet controller on Loongson-2K1000 SoC and LS7A1000 bridge. 277 278config STMMAC_PCI 279 tristate "STMMAC PCI bus support" 280 depends on STMMAC_ETH && PCI 281 depends on COMMON_CLK 282 help 283 This selects the platform specific bus support for the stmmac driver. 284 This driver was tested on XLINX XC2V3000 FF1152AMT0221 285 D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit. 286 287 If you have a controller with this interface, say Y or M here. 288 289 If unsure, say N. 290endif 291