1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef __LINUX_FOTG210_H
3 #define __LINUX_FOTG210_H
4
5 #include <linux/usb/ehci-dbgp.h>
6
7 /* definitions used for the EHCI driver */
8
9 /*
10 * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
11 * __leXX (normally) or __beXX (given FOTG210_BIG_ENDIAN_DESC), depending on
12 * the host controller implementation.
13 *
14 * To facilitate the strongest possible byte-order checking from "sparse"
15 * and so on, we use __leXX unless that's not practical.
16 */
17 #define __hc32 __le32
18 #define __hc16 __le16
19
20 /* statistics can be kept for tuning/monitoring */
21 struct fotg210_stats {
22 /* irq usage */
23 unsigned long normal;
24 unsigned long error;
25 unsigned long iaa;
26 unsigned long lost_iaa;
27
28 /* termination of urbs from core */
29 unsigned long complete;
30 unsigned long unlink;
31 };
32
33 /* fotg210_hcd->lock guards shared data against other CPUs:
34 * fotg210_hcd: async, unlink, periodic (and shadow), ...
35 * usb_host_endpoint: hcpriv
36 * fotg210_qh: qh_next, qtd_list
37 * fotg210_qtd: qtd_list
38 *
39 * Also, hold this lock when talking to HC registers or
40 * when updating hw_* fields in shared qh/qtd/... structures.
41 */
42
43 #define FOTG210_MAX_ROOT_PORTS 1 /* see HCS_N_PORTS */
44
45 /*
46 * fotg210_rh_state values of FOTG210_RH_RUNNING or above mean that the
47 * controller may be doing DMA. Lower values mean there's no DMA.
48 */
49 enum fotg210_rh_state {
50 FOTG210_RH_HALTED,
51 FOTG210_RH_SUSPENDED,
52 FOTG210_RH_RUNNING,
53 FOTG210_RH_STOPPING
54 };
55
56 /*
57 * Timer events, ordered by increasing delay length.
58 * Always update event_delays_ns[] and event_handlers[] (defined in
59 * ehci-timer.c) in parallel with this list.
60 */
61 enum fotg210_hrtimer_event {
62 FOTG210_HRTIMER_POLL_ASS, /* Poll for async schedule off */
63 FOTG210_HRTIMER_POLL_PSS, /* Poll for periodic schedule off */
64 FOTG210_HRTIMER_POLL_DEAD, /* Wait for dead controller to stop */
65 FOTG210_HRTIMER_UNLINK_INTR, /* Wait for interrupt QH unlink */
66 FOTG210_HRTIMER_FREE_ITDS, /* Wait for unused iTDs and siTDs */
67 FOTG210_HRTIMER_ASYNC_UNLINKS, /* Unlink empty async QHs */
68 FOTG210_HRTIMER_IAA_WATCHDOG, /* Handle lost IAA interrupts */
69 FOTG210_HRTIMER_DISABLE_PERIODIC, /* Wait to disable periodic sched */
70 FOTG210_HRTIMER_DISABLE_ASYNC, /* Wait to disable async sched */
71 FOTG210_HRTIMER_IO_WATCHDOG, /* Check for missing IRQs */
72 FOTG210_HRTIMER_NUM_EVENTS /* Must come last */
73 };
74 #define FOTG210_HRTIMER_NO_EVENT 99
75
76 struct fotg210_hcd { /* one per controller */
77 /* timing support */
78 enum fotg210_hrtimer_event next_hrtimer_event;
79 unsigned enabled_hrtimer_events;
80 ktime_t hr_timeouts[FOTG210_HRTIMER_NUM_EVENTS];
81 struct hrtimer hrtimer;
82
83 int PSS_poll_count;
84 int ASS_poll_count;
85 int died_poll_count;
86
87 /* glue to PCI and HCD framework */
88 struct fotg210_caps __iomem *caps;
89 struct fotg210_regs __iomem *regs;
90 struct ehci_dbg_port __iomem *debug;
91
92 __u32 hcs_params; /* cached register copy */
93 spinlock_t lock;
94 enum fotg210_rh_state rh_state;
95
96 /* general schedule support */
97 bool scanning:1;
98 bool need_rescan:1;
99 bool intr_unlinking:1;
100 bool async_unlinking:1;
101 bool shutdown:1;
102 struct fotg210_qh *qh_scan_next;
103
104 /* async schedule support */
105 struct fotg210_qh *async;
106 struct fotg210_qh *dummy; /* For AMD quirk use */
107 struct fotg210_qh *async_unlink;
108 struct fotg210_qh *async_unlink_last;
109 struct fotg210_qh *async_iaa;
110 unsigned async_unlink_cycle;
111 unsigned async_count; /* async activity count */
112
113 /* periodic schedule support */
114 #define DEFAULT_I_TDPS 1024 /* some HCs can do less */
115 unsigned periodic_size;
116 __hc32 *periodic; /* hw periodic table */
117 dma_addr_t periodic_dma;
118 struct list_head intr_qh_list;
119 unsigned i_thresh; /* uframes HC might cache */
120
121 union fotg210_shadow *pshadow; /* mirror hw periodic table */
122 struct fotg210_qh *intr_unlink;
123 struct fotg210_qh *intr_unlink_last;
124 unsigned intr_unlink_cycle;
125 unsigned now_frame; /* frame from HC hardware */
126 unsigned next_frame; /* scan periodic, start here */
127 unsigned intr_count; /* intr activity count */
128 unsigned isoc_count; /* isoc activity count */
129 unsigned periodic_count; /* periodic activity count */
130 /* max periodic time per uframe */
131 unsigned uframe_periodic_max;
132
133
134 /* list of itds completed while now_frame was still active */
135 struct list_head cached_itd_list;
136 struct fotg210_itd *last_itd_to_free;
137
138 /* per root hub port */
139 unsigned long reset_done[FOTG210_MAX_ROOT_PORTS];
140
141 /* bit vectors (one bit per port)
142 * which ports were already suspended at the start of a bus suspend
143 */
144 unsigned long bus_suspended;
145
146 /* which ports are edicated to the companion controller */
147 unsigned long companion_ports;
148
149 /* which ports are owned by the companion during a bus suspend */
150 unsigned long owned_ports;
151
152 /* which ports have the change-suspend feature turned on */
153 unsigned long port_c_suspend;
154
155 /* which ports are suspended */
156 unsigned long suspended_ports;
157
158 /* which ports have started to resume */
159 unsigned long resuming_ports;
160
161 /* per-HC memory pools (could be per-bus, but ...) */
162 struct dma_pool *qh_pool; /* qh per active urb */
163 struct dma_pool *qtd_pool; /* one or more per qh */
164 struct dma_pool *itd_pool; /* itd per iso urb */
165
166 unsigned random_frame;
167 unsigned long next_statechange;
168 ktime_t last_periodic_enable;
169 u32 command;
170
171 /* SILICON QUIRKS */
172 unsigned need_io_watchdog:1;
173 unsigned fs_i_thresh:1; /* Intel iso scheduling */
174
175 u8 sbrn; /* packed release number */
176
177 /* irq statistics */
178 #ifdef FOTG210_STATS
179 struct fotg210_stats stats;
180 # define INCR(x) ((x)++)
181 #else
182 # define INCR(x) do {} while (0)
183 #endif
184
185 struct fotg210 *fotg; /* Overarching FOTG210 device */
186 /* silicon clock */
187 struct clk *pclk;
188 };
189
190 /* convert between an HCD pointer and the corresponding FOTG210_HCD */
hcd_to_fotg210(struct usb_hcd * hcd)191 static inline struct fotg210_hcd *hcd_to_fotg210(struct usb_hcd *hcd)
192 {
193 return (struct fotg210_hcd *)(hcd->hcd_priv);
194 }
fotg210_to_hcd(struct fotg210_hcd * fotg210)195 static inline struct usb_hcd *fotg210_to_hcd(struct fotg210_hcd *fotg210)
196 {
197 return container_of((void *) fotg210, struct usb_hcd, hcd_priv);
198 }
199
200 /*-------------------------------------------------------------------------*/
201
202 /* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
203
204 /* Section 2.2 Host Controller Capability Registers */
205 struct fotg210_caps {
206 /* these fields are specified as 8 and 16 bit registers,
207 * but some hosts can't perform 8 or 16 bit PCI accesses.
208 * some hosts treat caplength and hciversion as parts of a 32-bit
209 * register, others treat them as two separate registers, this
210 * affects the memory map for big endian controllers.
211 */
212 u32 hc_capbase;
213 #define HC_LENGTH(fotg210, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
214 (fotg210_big_endian_capbase(fotg210) ? 24 : 0)))
215 #define HC_VERSION(fotg210, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \
216 (fotg210_big_endian_capbase(fotg210) ? 0 : 16)))
217 u32 hcs_params; /* HCSPARAMS - offset 0x4 */
218 #define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
219
220 u32 hcc_params; /* HCCPARAMS - offset 0x8 */
221 #define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
222 #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
223 u8 portroute[8]; /* nibbles for routing - offset 0xC */
224 };
225
226
227 /* Section 2.3 Host Controller Operational Registers */
228 struct fotg210_regs {
229
230 /* USBCMD: offset 0x00 */
231 u32 command;
232
233 /* EHCI 1.1 addendum */
234 /* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
235 #define CMD_PARK (1<<11) /* enable "park" on async qh */
236 #define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
237 #define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
238 #define CMD_ASE (1<<5) /* async schedule enable */
239 #define CMD_PSE (1<<4) /* periodic schedule enable */
240 /* 3:2 is periodic frame list size */
241 #define CMD_RESET (1<<1) /* reset HC not bus */
242 #define CMD_RUN (1<<0) /* start/stop HC */
243
244 /* USBSTS: offset 0x04 */
245 u32 status;
246 #define STS_ASS (1<<15) /* Async Schedule Status */
247 #define STS_PSS (1<<14) /* Periodic Schedule Status */
248 #define STS_RECL (1<<13) /* Reclamation */
249 #define STS_HALT (1<<12) /* Not running (any reason) */
250 /* some bits reserved */
251 /* these STS_* flags are also intr_enable bits (USBINTR) */
252 #define STS_IAA (1<<5) /* Interrupted on async advance */
253 #define STS_FATAL (1<<4) /* such as some PCI access errors */
254 #define STS_FLR (1<<3) /* frame list rolled over */
255 #define STS_PCD (1<<2) /* port change detect */
256 #define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
257 #define STS_INT (1<<0) /* "normal" completion (short, ...) */
258
259 /* USBINTR: offset 0x08 */
260 u32 intr_enable;
261
262 /* FRINDEX: offset 0x0C */
263 u32 frame_index; /* current microframe number */
264 /* CTRLDSSEGMENT: offset 0x10 */
265 u32 segment; /* address bits 63:32 if needed */
266 /* PERIODICLISTBASE: offset 0x14 */
267 u32 frame_list; /* points to periodic list */
268 /* ASYNCLISTADDR: offset 0x18 */
269 u32 async_next; /* address of next async queue head */
270
271 u32 reserved1;
272 /* PORTSC: offset 0x20 */
273 u32 port_status;
274 /* 31:23 reserved */
275 #define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
276 #define PORT_RESET (1<<8) /* reset port */
277 #define PORT_SUSPEND (1<<7) /* suspend port */
278 #define PORT_RESUME (1<<6) /* resume it */
279 #define PORT_PEC (1<<3) /* port enable change */
280 #define PORT_PE (1<<2) /* port enable */
281 #define PORT_CSC (1<<1) /* connect status change */
282 #define PORT_CONNECT (1<<0) /* device connected */
283 #define PORT_RWC_BITS (PORT_CSC | PORT_PEC)
284 u32 reserved2[19];
285
286 /* OTGCSR: offet 0x70 */
287 u32 otgcsr;
288 #define OTGCSR_HOST_SPD_TYP (3 << 22)
289 #define OTGCSR_A_BUS_DROP (1 << 5)
290 #define OTGCSR_A_BUS_REQ (1 << 4)
291
292 /* OTGISR: offset 0x74 */
293 u32 otgisr;
294 #define OTGISR_OVC (1 << 10)
295
296 u32 reserved3[15];
297
298 /* GMIR: offset 0xB4 */
299 u32 gmir;
300 #define GMIR_INT_POLARITY (1 << 3) /*Active High*/
301 #define GMIR_MHC_INT (1 << 2)
302 #define GMIR_MOTG_INT (1 << 1)
303 #define GMIR_MDEV_INT (1 << 0)
304 };
305
306 /*-------------------------------------------------------------------------*/
307
308 #define QTD_NEXT(fotg210, dma) cpu_to_hc32(fotg210, (u32)dma)
309
310 /*
311 * EHCI Specification 0.95 Section 3.5
312 * QTD: describe data transfer components (buffer, direction, ...)
313 * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
314 *
315 * These are associated only with "QH" (Queue Head) structures,
316 * used with control, bulk, and interrupt transfers.
317 */
318 struct fotg210_qtd {
319 /* first part defined by EHCI spec */
320 __hc32 hw_next; /* see EHCI 3.5.1 */
321 __hc32 hw_alt_next; /* see EHCI 3.5.2 */
322 __hc32 hw_token; /* see EHCI 3.5.3 */
323 #define QTD_TOGGLE (1 << 31) /* data toggle */
324 #define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
325 #define QTD_IOC (1 << 15) /* interrupt on complete */
326 #define QTD_CERR(tok) (((tok)>>10) & 0x3)
327 #define QTD_PID(tok) (((tok)>>8) & 0x3)
328 #define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */
329 #define QTD_STS_HALT (1 << 6) /* halted on error */
330 #define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */
331 #define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */
332 #define QTD_STS_XACT (1 << 3) /* device gave illegal response */
333 #define QTD_STS_MMF (1 << 2) /* incomplete split transaction */
334 #define QTD_STS_STS (1 << 1) /* split transaction state */
335 #define QTD_STS_PING (1 << 0) /* issue PING? */
336
337 #define ACTIVE_BIT(fotg210) cpu_to_hc32(fotg210, QTD_STS_ACTIVE)
338 #define HALT_BIT(fotg210) cpu_to_hc32(fotg210, QTD_STS_HALT)
339 #define STATUS_BIT(fotg210) cpu_to_hc32(fotg210, QTD_STS_STS)
340
341 __hc32 hw_buf[5]; /* see EHCI 3.5.4 */
342 __hc32 hw_buf_hi[5]; /* Appendix B */
343
344 /* the rest is HCD-private */
345 dma_addr_t qtd_dma; /* qtd address */
346 struct list_head qtd_list; /* sw qtd list */
347 struct urb *urb; /* qtd's urb */
348 size_t length; /* length of buffer */
349 } __aligned(32);
350
351 /* mask NakCnt+T in qh->hw_alt_next */
352 #define QTD_MASK(fotg210) cpu_to_hc32(fotg210, ~0x1f)
353
354 #define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
355
356 /*-------------------------------------------------------------------------*/
357
358 /* type tag from {qh,itd,fstn}->hw_next */
359 #define Q_NEXT_TYPE(fotg210, dma) ((dma) & cpu_to_hc32(fotg210, 3 << 1))
360
361 /*
362 * Now the following defines are not converted using the
363 * cpu_to_le32() macro anymore, since we have to support
364 * "dynamic" switching between be and le support, so that the driver
365 * can be used on one system with SoC EHCI controller using big-endian
366 * descriptors as well as a normal little-endian PCI EHCI controller.
367 */
368 /* values for that type tag */
369 #define Q_TYPE_ITD (0 << 1)
370 #define Q_TYPE_QH (1 << 1)
371 #define Q_TYPE_SITD (2 << 1)
372 #define Q_TYPE_FSTN (3 << 1)
373
374 /* next async queue entry, or pointer to interrupt/periodic QH */
375 #define QH_NEXT(fotg210, dma) \
376 (cpu_to_hc32(fotg210, (((u32)dma)&~0x01f)|Q_TYPE_QH))
377
378 /* for periodic/async schedules and qtd lists, mark end of list */
379 #define FOTG210_LIST_END(fotg210) \
380 cpu_to_hc32(fotg210, 1) /* "null pointer" to hw */
381
382 /*
383 * Entries in periodic shadow table are pointers to one of four kinds
384 * of data structure. That's dictated by the hardware; a type tag is
385 * encoded in the low bits of the hardware's periodic schedule. Use
386 * Q_NEXT_TYPE to get the tag.
387 *
388 * For entries in the async schedule, the type tag always says "qh".
389 */
390 union fotg210_shadow {
391 struct fotg210_qh *qh; /* Q_TYPE_QH */
392 struct fotg210_itd *itd; /* Q_TYPE_ITD */
393 struct fotg210_fstn *fstn; /* Q_TYPE_FSTN */
394 __hc32 *hw_next; /* (all types) */
395 void *ptr;
396 };
397
398 /*-------------------------------------------------------------------------*/
399
400 /*
401 * EHCI Specification 0.95 Section 3.6
402 * QH: describes control/bulk/interrupt endpoints
403 * See Fig 3-7 "Queue Head Structure Layout".
404 *
405 * These appear in both the async and (for interrupt) periodic schedules.
406 */
407
408 /* first part defined by EHCI spec */
409 struct fotg210_qh_hw {
410 __hc32 hw_next; /* see EHCI 3.6.1 */
411 __hc32 hw_info1; /* see EHCI 3.6.2 */
412 #define QH_CONTROL_EP (1 << 27) /* FS/LS control endpoint */
413 #define QH_HEAD (1 << 15) /* Head of async reclamation list */
414 #define QH_TOGGLE_CTL (1 << 14) /* Data toggle control */
415 #define QH_HIGH_SPEED (2 << 12) /* Endpoint speed */
416 #define QH_LOW_SPEED (1 << 12)
417 #define QH_FULL_SPEED (0 << 12)
418 #define QH_INACTIVATE (1 << 7) /* Inactivate on next transaction */
419 __hc32 hw_info2; /* see EHCI 3.6.2 */
420 #define QH_SMASK 0x000000ff
421 #define QH_CMASK 0x0000ff00
422 #define QH_HUBADDR 0x007f0000
423 #define QH_HUBPORT 0x3f800000
424 #define QH_MULT 0xc0000000
425 __hc32 hw_current; /* qtd list - see EHCI 3.6.4 */
426
427 /* qtd overlay (hardware parts of a struct fotg210_qtd) */
428 __hc32 hw_qtd_next;
429 __hc32 hw_alt_next;
430 __hc32 hw_token;
431 __hc32 hw_buf[5];
432 __hc32 hw_buf_hi[5];
433 } __aligned(32);
434
435 struct fotg210_qh {
436 struct fotg210_qh_hw *hw; /* Must come first */
437 /* the rest is HCD-private */
438 dma_addr_t qh_dma; /* address of qh */
439 union fotg210_shadow qh_next; /* ptr to qh; or periodic */
440 struct list_head qtd_list; /* sw qtd list */
441 struct list_head intr_node; /* list of intr QHs */
442 struct fotg210_qtd *dummy;
443 struct fotg210_qh *unlink_next; /* next on unlink list */
444
445 unsigned unlink_cycle;
446
447 u8 needs_rescan; /* Dequeue during giveback */
448 u8 qh_state;
449 #define QH_STATE_LINKED 1 /* HC sees this */
450 #define QH_STATE_UNLINK 2 /* HC may still see this */
451 #define QH_STATE_IDLE 3 /* HC doesn't see this */
452 #define QH_STATE_UNLINK_WAIT 4 /* LINKED and on unlink q */
453 #define QH_STATE_COMPLETING 5 /* don't touch token.HALT */
454
455 u8 xacterrs; /* XactErr retry counter */
456 #define QH_XACTERR_MAX 32 /* XactErr retry limit */
457
458 /* periodic schedule info */
459 u8 usecs; /* intr bandwidth */
460 u8 gap_uf; /* uframes split/csplit gap */
461 u8 c_usecs; /* ... split completion bw */
462 u16 tt_usecs; /* tt downstream bandwidth */
463 unsigned short period; /* polling interval */
464 unsigned short start; /* where polling starts */
465 #define NO_FRAME ((unsigned short)~0) /* pick new start */
466
467 struct usb_device *dev; /* access to TT */
468 unsigned is_out:1; /* bulk or intr OUT */
469 unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
470 };
471
472 /*-------------------------------------------------------------------------*/
473
474 /* description of one iso transaction (up to 3 KB data if highspeed) */
475 struct fotg210_iso_packet {
476 /* These will be copied to iTD when scheduling */
477 u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */
478 __hc32 transaction; /* itd->hw_transaction[i] |= */
479 u8 cross; /* buf crosses pages */
480 /* for full speed OUT splits */
481 u32 buf1;
482 };
483
484 /* temporary schedule data for packets from iso urbs (both speeds)
485 * each packet is one logical usb transaction to the device (not TT),
486 * beginning at stream->next_uframe
487 */
488 struct fotg210_iso_sched {
489 struct list_head td_list;
490 unsigned span;
491 struct fotg210_iso_packet packet[];
492 };
493
494 /*
495 * fotg210_iso_stream - groups all (s)itds for this endpoint.
496 * acts like a qh would, if EHCI had them for ISO.
497 */
498 struct fotg210_iso_stream {
499 /* first field matches fotg210_hq, but is NULL */
500 struct fotg210_qh_hw *hw;
501
502 u8 bEndpointAddress;
503 u8 highspeed;
504 struct list_head td_list; /* queued itds */
505 struct list_head free_list; /* list of unused itds */
506 struct usb_device *udev;
507 struct usb_host_endpoint *ep;
508
509 /* output of (re)scheduling */
510 int next_uframe;
511 __hc32 splits;
512
513 /* the rest is derived from the endpoint descriptor,
514 * trusting urb->interval == f(epdesc->bInterval) and
515 * including the extra info for hw_bufp[0..2]
516 */
517 u8 usecs, c_usecs;
518 u16 interval;
519 u16 tt_usecs;
520 u16 maxp;
521 u16 raw_mask;
522 unsigned bandwidth;
523
524 /* This is used to initialize iTD's hw_bufp fields */
525 __hc32 buf0;
526 __hc32 buf1;
527 __hc32 buf2;
528
529 /* this is used to initialize sITD's tt info */
530 __hc32 address;
531 };
532
533 /*-------------------------------------------------------------------------*/
534
535 /*
536 * EHCI Specification 0.95 Section 3.3
537 * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
538 *
539 * Schedule records for high speed iso xfers
540 */
541 struct fotg210_itd {
542 /* first part defined by EHCI spec */
543 __hc32 hw_next; /* see EHCI 3.3.1 */
544 __hc32 hw_transaction[8]; /* see EHCI 3.3.2 */
545 #define FOTG210_ISOC_ACTIVE (1<<31) /* activate transfer this slot */
546 #define FOTG210_ISOC_BUF_ERR (1<<30) /* Data buffer error */
547 #define FOTG210_ISOC_BABBLE (1<<29) /* babble detected */
548 #define FOTG210_ISOC_XACTERR (1<<28) /* XactErr - transaction error */
549 #define FOTG210_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff)
550 #define FOTG210_ITD_IOC (1 << 15) /* interrupt on complete */
551
552 #define ITD_ACTIVE(fotg210) cpu_to_hc32(fotg210, FOTG210_ISOC_ACTIVE)
553
554 __hc32 hw_bufp[7]; /* see EHCI 3.3.3 */
555 __hc32 hw_bufp_hi[7]; /* Appendix B */
556
557 /* the rest is HCD-private */
558 dma_addr_t itd_dma; /* for this itd */
559 union fotg210_shadow itd_next; /* ptr to periodic q entry */
560
561 struct urb *urb;
562 struct fotg210_iso_stream *stream; /* endpoint's queue */
563 struct list_head itd_list; /* list of stream's itds */
564
565 /* any/all hw_transactions here may be used by that urb */
566 unsigned frame; /* where scheduled */
567 unsigned pg;
568 unsigned index[8]; /* in urb->iso_frame_desc */
569 } __aligned(32);
570
571 /*-------------------------------------------------------------------------*/
572
573 /*
574 * EHCI Specification 0.96 Section 3.7
575 * Periodic Frame Span Traversal Node (FSTN)
576 *
577 * Manages split interrupt transactions (using TT) that span frame boundaries
578 * into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN
579 * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
580 * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
581 */
582 struct fotg210_fstn {
583 __hc32 hw_next; /* any periodic q entry */
584 __hc32 hw_prev; /* qh or FOTG210_LIST_END */
585
586 /* the rest is HCD-private */
587 dma_addr_t fstn_dma;
588 union fotg210_shadow fstn_next; /* ptr to periodic q entry */
589 } __aligned(32);
590
591 /*-------------------------------------------------------------------------*/
592
593 /* Prepare the PORTSC wakeup flags during controller suspend/resume */
594
595 #define fotg210_prepare_ports_for_controller_suspend(fotg210, do_wakeup) \
596 fotg210_adjust_port_wakeup_flags(fotg210, true, do_wakeup)
597
598 #define fotg210_prepare_ports_for_controller_resume(fotg210) \
599 fotg210_adjust_port_wakeup_flags(fotg210, false, false)
600
601 /*-------------------------------------------------------------------------*/
602
603 /*
604 * Some EHCI controllers have a Transaction Translator built into the
605 * root hub. This is a non-standard feature. Each controller will need
606 * to add code to the following inline functions, and call them as
607 * needed (mostly in root hub code).
608 */
609
610 static inline unsigned int
fotg210_get_speed(struct fotg210_hcd * fotg210,unsigned int portsc)611 fotg210_get_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
612 {
613 return (readl(&fotg210->regs->otgcsr)
614 & OTGCSR_HOST_SPD_TYP) >> 22;
615 }
616
617 /* Returns the speed of a device attached to a port on the root hub. */
618 static inline unsigned int
fotg210_port_speed(struct fotg210_hcd * fotg210,unsigned int portsc)619 fotg210_port_speed(struct fotg210_hcd *fotg210, unsigned int portsc)
620 {
621 switch (fotg210_get_speed(fotg210, portsc)) {
622 case 0:
623 return 0;
624 case 1:
625 return USB_PORT_STAT_LOW_SPEED;
626 case 2:
627 default:
628 return USB_PORT_STAT_HIGH_SPEED;
629 }
630 }
631
632 /*-------------------------------------------------------------------------*/
633
634 #define fotg210_has_fsl_portno_bug(e) (0)
635
636 /*
637 * While most USB host controllers implement their registers in
638 * little-endian format, a minority (celleb companion chip) implement
639 * them in big endian format.
640 *
641 * This attempts to support either format at compile time without a
642 * runtime penalty, or both formats with the additional overhead
643 * of checking a flag bit.
644 *
645 */
646
647 #define fotg210_big_endian_mmio(e) 0
648 #define fotg210_big_endian_capbase(e) 0
649
fotg210_readl(const struct fotg210_hcd * fotg210,__u32 __iomem * regs)650 static inline unsigned int fotg210_readl(const struct fotg210_hcd *fotg210,
651 __u32 __iomem *regs)
652 {
653 return readl(regs);
654 }
655
fotg210_writel(const struct fotg210_hcd * fotg210,const unsigned int val,__u32 __iomem * regs)656 static inline void fotg210_writel(const struct fotg210_hcd *fotg210,
657 const unsigned int val, __u32 __iomem *regs)
658 {
659 writel(val, regs);
660 }
661
662 /* cpu to fotg210 */
cpu_to_hc32(const struct fotg210_hcd * fotg210,const u32 x)663 static inline __hc32 cpu_to_hc32(const struct fotg210_hcd *fotg210, const u32 x)
664 {
665 return cpu_to_le32(x);
666 }
667
668 /* fotg210 to cpu */
hc32_to_cpu(const struct fotg210_hcd * fotg210,const __hc32 x)669 static inline u32 hc32_to_cpu(const struct fotg210_hcd *fotg210, const __hc32 x)
670 {
671 return le32_to_cpu(x);
672 }
673
hc32_to_cpup(const struct fotg210_hcd * fotg210,const __hc32 * x)674 static inline u32 hc32_to_cpup(const struct fotg210_hcd *fotg210,
675 const __hc32 *x)
676 {
677 return le32_to_cpup(x);
678 }
679
680 /*-------------------------------------------------------------------------*/
681
fotg210_read_frame_index(struct fotg210_hcd * fotg210)682 static inline unsigned fotg210_read_frame_index(struct fotg210_hcd *fotg210)
683 {
684 return fotg210_readl(fotg210, &fotg210->regs->frame_index);
685 }
686
687 /*-------------------------------------------------------------------------*/
688
689 #endif /* __LINUX_FOTG210_H */
690