• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *	matrox_w1.c
4  *
5  * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net>
6  */
7 
8 #include <asm/types.h>
9 #include <linux/atomic.h>
10 #include <linux/io.h>
11 
12 #include <linux/delay.h>
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/list.h>
16 #include <linux/interrupt.h>
17 #include <linux/spinlock.h>
18 #include <linux/timer.h>
19 #include <linux/slab.h>
20 #include <linux/pci_ids.h>
21 #include <linux/pci.h>
22 
23 #include <linux/w1.h>
24 
25 /*
26  * Matrox G400 DDC registers.
27  */
28 
29 #define MATROX_G400_DDC_CLK		(1<<4)
30 #define MATROX_G400_DDC_DATA		(1<<1)
31 
32 #define MATROX_BASE			0x3C00
33 #define MATROX_STATUS			0x1e14
34 
35 #define MATROX_PORT_INDEX_OFFSET	0x00
36 #define MATROX_PORT_DATA_OFFSET		0x0A
37 
38 #define MATROX_GET_CONTROL		0x2A
39 #define MATROX_GET_DATA			0x2B
40 #define MATROX_CURSOR_CTL		0x06
41 
42 struct matrox_device {
43 	void __iomem *base_addr;
44 	void __iomem *port_index;
45 	void __iomem *port_data;
46 	u8 data_mask;
47 
48 	unsigned long phys_addr;
49 	void __iomem *virt_addr;
50 	unsigned long found;
51 
52 	struct w1_bus_master *bus_master;
53 };
54 
55 /*
56  * These functions read and write DDC Data bit.
57  *
58  * Using tristate pins, since i can't find any open-drain pin in whole motherboard.
59  * Unfortunately we can't connect to Intel's 82801xx IO controller
60  * since we don't know motherboard schema, which has pretty unused(may be not) GPIO.
61  *
62  * I've heard that PIIX also has open drain pin.
63  *
64  * Port mapping.
65  */
matrox_w1_read_reg(struct matrox_device * dev,u8 reg)66 static inline u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg)
67 {
68 	u8 ret;
69 
70 	writeb(reg, dev->port_index);
71 	ret = readb(dev->port_data);
72 	barrier();
73 
74 	return ret;
75 }
76 
matrox_w1_write_reg(struct matrox_device * dev,u8 reg,u8 val)77 static inline void matrox_w1_write_reg(struct matrox_device *dev, u8 reg, u8 val)
78 {
79 	writeb(reg, dev->port_index);
80 	writeb(val, dev->port_data);
81 	wmb();
82 }
83 
matrox_w1_write_ddc_bit(void * data,u8 bit)84 static void matrox_w1_write_ddc_bit(void *data, u8 bit)
85 {
86 	u8 ret;
87 	struct matrox_device *dev = data;
88 
89 	if (bit)
90 		bit = 0;
91 	else
92 		bit = dev->data_mask;
93 
94 	ret = matrox_w1_read_reg(dev, MATROX_GET_CONTROL);
95 	matrox_w1_write_reg(dev, MATROX_GET_CONTROL, ((ret & ~dev->data_mask) | bit));
96 	matrox_w1_write_reg(dev, MATROX_GET_DATA, 0x00);
97 }
98 
matrox_w1_read_ddc_bit(void * data)99 static u8 matrox_w1_read_ddc_bit(void *data)
100 {
101 	u8 ret;
102 	struct matrox_device *dev = data;
103 
104 	ret = matrox_w1_read_reg(dev, MATROX_GET_DATA);
105 
106 	return ret;
107 }
108 
matrox_w1_hw_init(struct matrox_device * dev)109 static void matrox_w1_hw_init(struct matrox_device *dev)
110 {
111 	matrox_w1_write_reg(dev, MATROX_GET_DATA, 0xFF);
112 	matrox_w1_write_reg(dev, MATROX_GET_CONTROL, 0x00);
113 }
114 
matrox_w1_probe(struct pci_dev * pdev,const struct pci_device_id * ent)115 static int matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
116 {
117 	struct matrox_device *dev;
118 	int err;
119 
120 	if (pdev->vendor != PCI_VENDOR_ID_MATROX || pdev->device != PCI_DEVICE_ID_MATROX_G400)
121 		return -ENODEV;
122 
123 	dev = kzalloc(sizeof(struct matrox_device) +
124 		       sizeof(struct w1_bus_master), GFP_KERNEL);
125 	if (!dev)
126 		return -ENOMEM;
127 
128 	dev->bus_master = (struct w1_bus_master *)(dev + 1);
129 
130 	/*
131 	 * True for G400, for some other we need resource 0, see drivers/video/matrox/matroxfb_base.c
132 	 */
133 
134 	dev->phys_addr = pci_resource_start(pdev, 1);
135 
136 	dev->virt_addr = ioremap(dev->phys_addr, 16384);
137 	if (!dev->virt_addr) {
138 		dev_err(&pdev->dev, "%s: failed to ioremap(0x%lx, %d).\n",
139 			__func__, dev->phys_addr, 16384);
140 		err = -EIO;
141 		goto err_out_free_device;
142 	}
143 
144 	dev->base_addr = dev->virt_addr + MATROX_BASE;
145 	dev->port_index = dev->base_addr + MATROX_PORT_INDEX_OFFSET;
146 	dev->port_data = dev->base_addr + MATROX_PORT_DATA_OFFSET;
147 	dev->data_mask = (MATROX_G400_DDC_DATA);
148 
149 	matrox_w1_hw_init(dev);
150 
151 	dev->bus_master->data = dev;
152 	dev->bus_master->read_bit = &matrox_w1_read_ddc_bit;
153 	dev->bus_master->write_bit = &matrox_w1_write_ddc_bit;
154 
155 	err = w1_add_master_device(dev->bus_master);
156 	if (err)
157 		goto err_out_free_device;
158 
159 	pci_set_drvdata(pdev, dev);
160 
161 	dev->found = 1;
162 
163 	dev_info(&pdev->dev, "Matrox G400 GPIO transport layer for 1-wire.\n");
164 
165 	return 0;
166 
167 err_out_free_device:
168 	if (dev->virt_addr)
169 		iounmap(dev->virt_addr);
170 	kfree(dev);
171 
172 	return err;
173 }
174 
matrox_w1_remove(struct pci_dev * pdev)175 static void matrox_w1_remove(struct pci_dev *pdev)
176 {
177 	struct matrox_device *dev = pci_get_drvdata(pdev);
178 
179 	if (dev->found) {
180 		w1_remove_master_device(dev->bus_master);
181 		iounmap(dev->virt_addr);
182 	}
183 	kfree(dev);
184 }
185 
186 static struct pci_device_id matrox_w1_tbl[] = {
187 	{ PCI_DEVICE(PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400) },
188 	{ },
189 };
190 MODULE_DEVICE_TABLE(pci, matrox_w1_tbl);
191 
192 static struct pci_driver matrox_w1_pci_driver = {
193 	.name = "matrox_w1",
194 	.id_table = matrox_w1_tbl,
195 	.probe = matrox_w1_probe,
196 	.remove = matrox_w1_remove,
197 };
198 module_pci_driver(matrox_w1_pci_driver);
199 
200 MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
201 MODULE_DESCRIPTION("Driver for transport(Dallas 1-wire protocol) over VGA DDC(matrox gpio).");
202 MODULE_LICENSE("GPL");
203