1# HPM5300EVK 2 3## Overview 4 5The HPM5300EVK provides a series of interfaces for the characteristic peripherals of the HPM5300 series microcontrollers, including an ADC input SMA interface, a first-class motor control interface, a ABZ output interface, a RS485/422 interface. HPM5300EVK also integrates one 2x20 pin IO expansion interfaces, which connect most of the IOs of HPM5300 MCU for users to freely evaluate. HPM5300EVK expands NOR Flash storage for MCU and integrates an on-board debugger. 6 7 8 9## DIP Switch 10 11- Bit 1 and 2 controls boot mode 12 13| bit[2:1] | Description | 14| -------- | ---------------------------- | 15| OFF, OFF | Boot from Quad SPI NOR flash | 16| OFF, ON | Serial boot | 17| ON, OFF | ISP | 18 19## Button 20 21(lab_hpm5300evk_board_buttons)= 22 23| Name | FUNCTIONS | 24| -------- | -------------------------------- | 25| WAKEUP | Wakeup Button | 26| RESET | Reset Button | 27| USER KEY | TinyUF2 Boot Button, GPIO Button | 28 29## Pin Description 30 31(lab_hpm5300_evk_board)= 32 33- UART Pin: 34 35| Function | Position | 36| --------- | -------- | 37| UART2.TXD | P1[8] | 38| UART2.RXD | P1[10] | 39| UART2.DE | P1[38] | 40 41- LIN Pin: 42 43| Function | Position | 44| -------- | -------- | 45| LIN3 | J9[5] | 46 47- SPI Pin： 48 49| Function | Position | 50| --------- | -------- | 51| SPI1.CSN | P1[24] | 52| SPI1.SCLK | P1[23] | 53| SPI1.MISO | P1[21] | 54| SPI1.MOSI | P1[19] | 55 56- I2C Pin： 57 58| Function | Position | 59| -------- | -------- | 60| I2C0.SCL | P1[28] | 61| I2C0.SDA | P1[27] | 62 63- ACMP Pin: 64 65| Function | Position | 66| -------------- | -------- | 67| ACMP.CMP1.INN4 | J7[4] | 68| ACMP.COMP_1 | J7[2] | 69 70- GPTMR Pin: 71 72| Function | Position | 73| ------------- | -------- | 74| GPTMR0.CAPT_0 | P1[3] | 75| GPTMR0.COMP_0 | P1[5] | 76| GPTMR0.COMP_1 | P1[8] | 77 78- ADC16 Pin: 79 80| Function | Position | 81| ---------- | -------- | 82| ADC0.INA4 | J7[15] | 83| ADC0.INA11 | J7[20] | 84| ADC1.INA1 | J7[2] | 85| ADC1.INA2 | J7[6] | 86| ADC1.INA3 | J7[4] | 87| ADC1.INA5 | J7[13] | 88 89- DAC Pin: 90 91| Function | Position | 92| -------- | -------- | 93| DAC0.OUT | J7[20] | 94| DAC1.OUT | J7[2] | 95 96- PWM Pin: 97 98| Function | Position | 99| -------- | -------- | 100| PWM0.P2 | J7[11] | 101| PWM0.P3 | J7[12] | 102 103- PLB Output Pin: 104 105| Function | Position | 106| -------- | -------- | 107| PLB.OUT | P1[24] | 108 109- CAN Pin: 110 111| Function | Position | 112| -------- | -------- | 113| CAN_L | J9[1] | 114| CAN_H | J9[3] | 115 116- OPAMP Pin: 117 118| Function | Position | 119| --------- | -------- | 120| OPAMP.OUT | RF1 | 121| OPAMP.IN | P1[31] | 122 123- RDC Pin: 124 125| Function | evk Position | RDC Position | 126| --------- | ------ | ------ | 127| RDC.PWM | J7[9] | J2[7] | 128| RDC.ADC0 | J7[13] | J2[13] | 129| RDC.ADC1 | J7[14] | J2[14] | 130| GND | J7[32] | J2[17] | 131 132- QEO ABZ Pin: 133 134| Function | Position | 135| --------- | ------ | 136| QEO0.A | J7[26] | 137| QEO0.B | J7[24] | 138| QEO0.Z | J7[22] | 139 140- PWM pin with QEO control： 141 142| Function | EVK Position | HPMicro's stepper drive board Position | 143| ------- | ------ | ------------- | 144| PWM0.P2 | J7[11] | PWM_A1(J8[9]) | 145| PWM0.P3 | J7[12] | PWM_A2(J8[10]) | 146| PWM0.P4 | J7[9] | PWM_B1(J8[11]) | 147| PWM0.P5 | J7[10] | PWM_B2(J8[12]) | 148 149- SEI Pin: 150 151| Function | Position | 152| --------- | ------ | 153| SEI1.CLKI_N | J7[31] | 154| SEI1.CLKI_P | J7[29] | 155| SEI1.CLKO_P | J7[27] | 156| SEI1.CLKO_N | J7[25] | 157| SEI1.DATA_P | J7[23] | 158| SEI1.DATA_N | J7[21] | 159 160- SEI CLK Section: 161 162| Function | Position | Note | 163| --------- | ------ |------| 164| SEI1.CLK Section | J5 | Master side, CLKO active. Slave side，CLKI active | 165 166- Motor Pin: 167 168 Refer to section [DRV-LV50A-MP1907 Motor Driver Board ](lab_drv_lv50a_mp1907) for configuration 169
