1 /* SPDX-License-Identifier: BSD-3-Clause-Clear */ 2 /* 3 * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved. 4 * Copyright (c) 2021-2022, 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved. 5 */ 6 #include "core.h" 7 8 #ifndef ATH12K_HAL_DESC_H 9 #define ATH12K_HAL_DESC_H 10 11 #define BUFFER_ADDR_INFO0_ADDR GENMASK(31, 0) 12 13 #define BUFFER_ADDR_INFO1_ADDR GENMASK(7, 0) 14 #define BUFFER_ADDR_INFO1_RET_BUF_MGR GENMASK(11, 8) 15 #define BUFFER_ADDR_INFO1_SW_COOKIE GENMASK(31, 12) 16 17 struct ath12k_buffer_addr { 18 __le32 info0; 19 __le32 info1; 20 } __packed; 21 22 /* ath12k_buffer_addr 23 * 24 * buffer_addr_31_0 25 * Address (lower 32 bits) of the MSDU buffer or MSDU_EXTENSION 26 * descriptor or Link descriptor 27 * 28 * buffer_addr_39_32 29 * Address (upper 8 bits) of the MSDU buffer or MSDU_EXTENSION 30 * descriptor or Link descriptor 31 * 32 * return_buffer_manager (RBM) 33 * Consumer: WBM 34 * Producer: SW/FW 35 * Indicates to which buffer manager the buffer or MSDU_EXTENSION 36 * descriptor or link descriptor that is being pointed to shall be 37 * returned after the frame has been processed. It is used by WBM 38 * for routing purposes. 39 * 40 * Values are defined in enum %HAL_RX_BUF_RBM_ 41 * 42 * sw_buffer_cookie 43 * Cookie field exclusively used by SW. HW ignores the contents, 44 * accept that it passes the programmed value on to other 45 * descriptors together with the physical address. 46 * 47 * Field can be used by SW to for example associate the buffers 48 * physical address with the virtual address. 49 * 50 * NOTE1: 51 * The three most significant bits can have a special meaning 52 * in case this struct is embedded in a TX_MPDU_DETAILS STRUCT, 53 * and field transmit_bw_restriction is set 54 * 55 * In case of NON punctured transmission: 56 * Sw_buffer_cookie[19:17] = 3'b000: 20 MHz TX only 57 * Sw_buffer_cookie[19:17] = 3'b001: 40 MHz TX only 58 * Sw_buffer_cookie[19:17] = 3'b010: 80 MHz TX only 59 * Sw_buffer_cookie[19:17] = 3'b011: 160 MHz TX only 60 * Sw_buffer_cookie[19:17] = 3'b101: 240 MHz TX only 61 * Sw_buffer_cookie[19:17] = 3'b100: 320 MHz TX only 62 * Sw_buffer_cookie[19:18] = 2'b11: reserved 63 * 64 * In case of punctured transmission: 65 * Sw_buffer_cookie[19:16] = 4'b0000: pattern 0 only 66 * Sw_buffer_cookie[19:16] = 4'b0001: pattern 1 only 67 * Sw_buffer_cookie[19:16] = 4'b0010: pattern 2 only 68 * Sw_buffer_cookie[19:16] = 4'b0011: pattern 3 only 69 * Sw_buffer_cookie[19:16] = 4'b0100: pattern 4 only 70 * Sw_buffer_cookie[19:16] = 4'b0101: pattern 5 only 71 * Sw_buffer_cookie[19:16] = 4'b0110: pattern 6 only 72 * Sw_buffer_cookie[19:16] = 4'b0111: pattern 7 only 73 * Sw_buffer_cookie[19:16] = 4'b1000: pattern 8 only 74 * Sw_buffer_cookie[19:16] = 4'b1001: pattern 9 only 75 * Sw_buffer_cookie[19:16] = 4'b1010: pattern 10 only 76 * Sw_buffer_cookie[19:16] = 4'b1011: pattern 11 only 77 * Sw_buffer_cookie[19:18] = 2'b11: reserved 78 * 79 * Note: a punctured transmission is indicated by the presence 80 * of TLV TX_PUNCTURE_SETUP embedded in the scheduler TLV 81 * 82 * Sw_buffer_cookie[20:17]: Tid: The TID field in the QoS control 83 * field 84 * 85 * Sw_buffer_cookie[16]: Mpdu_qos_control_valid: This field 86 * indicates MPDUs with a QoS control field. 87 * 88 */ 89 90 enum hal_tlv_tag { 91 HAL_MACTX_CBF_START = 0 /* 0x0 */, 92 HAL_PHYRX_DATA = 1 /* 0x1 */, 93 HAL_PHYRX_CBF_DATA_RESP = 2 /* 0x2 */, 94 HAL_PHYRX_ABORT_REQUEST = 3 /* 0x3 */, 95 HAL_PHYRX_USER_ABORT_NOTIFICATION = 4 /* 0x4 */, 96 HAL_MACTX_DATA_RESP = 5 /* 0x5 */, 97 HAL_MACTX_CBF_DATA = 6 /* 0x6 */, 98 HAL_MACTX_CBF_DONE = 7 /* 0x7 */, 99 HAL_PHYRX_LMR_DATA_RESP = 8 /* 0x8 */, 100 HAL_RXPCU_TO_UCODE_START = 9 /* 0x9 */, 101 HAL_RXPCU_TO_UCODE_DELIMITER_FOR_FULL_MPDU = 10 /* 0xa */, 102 HAL_RXPCU_TO_UCODE_FULL_MPDU_DATA = 11 /* 0xb */, 103 HAL_RXPCU_TO_UCODE_FCS_STATUS = 12 /* 0xc */, 104 HAL_RXPCU_TO_UCODE_MPDU_DELIMITER = 13 /* 0xd */, 105 HAL_RXPCU_TO_UCODE_DELIMITER_FOR_MPDU_HEADER = 14 /* 0xe */, 106 HAL_RXPCU_TO_UCODE_MPDU_HEADER_DATA = 15 /* 0xf */, 107 HAL_RXPCU_TO_UCODE_END = 16 /* 0x10 */, 108 HAL_MACRX_CBF_READ_REQUEST = 32 /* 0x20 */, 109 HAL_MACRX_CBF_DATA_REQUEST = 33 /* 0x21 */, 110 HAL_MACRXXPECT_NDP_RECEPTION = 34 /* 0x22 */, 111 HAL_MACRX_FREEZE_CAPTURE_CHANNEL = 35 /* 0x23 */, 112 HAL_MACRX_NDP_TIMEOUT = 36 /* 0x24 */, 113 HAL_MACRX_ABORT_ACK = 37 /* 0x25 */, 114 HAL_MACRX_REQ_IMPLICIT_FB = 38 /* 0x26 */, 115 HAL_MACRX_CHAIN_MASK = 39 /* 0x27 */, 116 HAL_MACRX_NAP_USER = 40 /* 0x28 */, 117 HAL_MACRX_ABORT_REQUEST = 41 /* 0x29 */, 118 HAL_PHYTX_OTHER_TRANSMIT_INFO16 = 42 /* 0x2a */, 119 HAL_PHYTX_ABORT_ACK = 43 /* 0x2b */, 120 HAL_PHYTX_ABORT_REQUEST = 44 /* 0x2c */, 121 HAL_PHYTX_PKT_END = 45 /* 0x2d */, 122 HAL_PHYTX_PPDU_HEADER_INFO_REQUEST = 46 /* 0x2e */, 123 HAL_PHYTX_REQUEST_CTRL_INFO = 47 /* 0x2f */, 124 HAL_PHYTX_DATA_REQUEST = 48 /* 0x30 */, 125 HAL_PHYTX_BF_CV_LOADING_DONE = 49 /* 0x31 */, 126 HAL_PHYTX_NAP_ACK = 50 /* 0x32 */, 127 HAL_PHYTX_NAP_DONE = 51 /* 0x33 */, 128 HAL_PHYTX_OFF_ACK = 52 /* 0x34 */, 129 HAL_PHYTX_ON_ACK = 53 /* 0x35 */, 130 HAL_PHYTX_SYNTH_OFF_ACK = 54 /* 0x36 */, 131 HAL_PHYTX_DEBUG16 = 55 /* 0x37 */, 132 HAL_MACTX_ABORT_REQUEST = 56 /* 0x38 */, 133 HAL_MACTX_ABORT_ACK = 57 /* 0x39 */, 134 HAL_MACTX_PKT_END = 58 /* 0x3a */, 135 HAL_MACTX_PRE_PHY_DESC = 59 /* 0x3b */, 136 HAL_MACTX_BF_PARAMS_COMMON = 60 /* 0x3c */, 137 HAL_MACTX_BF_PARAMS_PER_USER = 61 /* 0x3d */, 138 HAL_MACTX_PREFETCH_CV = 62 /* 0x3e */, 139 HAL_MACTX_USER_DESC_COMMON = 63 /* 0x3f */, 140 HAL_MACTX_USER_DESC_PER_USER = 64 /* 0x40 */, 141 HAL_XAMPLE_USER_TLV_16 = 65 /* 0x41 */, 142 HAL_XAMPLE_TLV_16 = 66 /* 0x42 */, 143 HAL_MACTX_PHY_OFF = 67 /* 0x43 */, 144 HAL_MACTX_PHY_ON = 68 /* 0x44 */, 145 HAL_MACTX_SYNTH_OFF = 69 /* 0x45 */, 146 HAL_MACTXXPECT_CBF_COMMON = 70 /* 0x46 */, 147 HAL_MACTXXPECT_CBF_PER_USER = 71 /* 0x47 */, 148 HAL_MACTX_PHY_DESC = 72 /* 0x48 */, 149 HAL_MACTX_L_SIG_A = 73 /* 0x49 */, 150 HAL_MACTX_L_SIG_B = 74 /* 0x4a */, 151 HAL_MACTX_HT_SIG = 75 /* 0x4b */, 152 HAL_MACTX_VHT_SIG_A = 76 /* 0x4c */, 153 HAL_MACTX_VHT_SIG_B_SU20 = 77 /* 0x4d */, 154 HAL_MACTX_VHT_SIG_B_SU40 = 78 /* 0x4e */, 155 HAL_MACTX_VHT_SIG_B_SU80 = 79 /* 0x4f */, 156 HAL_MACTX_VHT_SIG_B_SU160 = 80 /* 0x50 */, 157 HAL_MACTX_VHT_SIG_B_MU20 = 81 /* 0x51 */, 158 HAL_MACTX_VHT_SIG_B_MU40 = 82 /* 0x52 */, 159 HAL_MACTX_VHT_SIG_B_MU80 = 83 /* 0x53 */, 160 HAL_MACTX_VHT_SIG_B_MU160 = 84 /* 0x54 */, 161 HAL_MACTX_SERVICE = 85 /* 0x55 */, 162 HAL_MACTX_HE_SIG_A_SU = 86 /* 0x56 */, 163 HAL_MACTX_HE_SIG_A_MU_DL = 87 /* 0x57 */, 164 HAL_MACTX_HE_SIG_A_MU_UL = 88 /* 0x58 */, 165 HAL_MACTX_HE_SIG_B1_MU = 89 /* 0x59 */, 166 HAL_MACTX_HE_SIG_B2_MU = 90 /* 0x5a */, 167 HAL_MACTX_HE_SIG_B2_OFDMA = 91 /* 0x5b */, 168 HAL_MACTX_DELETE_CV = 92 /* 0x5c */, 169 HAL_MACTX_MU_UPLINK_COMMON = 93 /* 0x5d */, 170 HAL_MACTX_MU_UPLINK_USER_SETUP = 94 /* 0x5e */, 171 HAL_MACTX_OTHER_TRANSMIT_INFO = 95 /* 0x5f */, 172 HAL_MACTX_PHY_NAP = 96 /* 0x60 */, 173 HAL_MACTX_DEBUG = 97 /* 0x61 */, 174 HAL_PHYRX_ABORT_ACK = 98 /* 0x62 */, 175 HAL_PHYRX_GENERATED_CBF_DETAILS = 99 /* 0x63 */, 176 HAL_PHYRX_RSSI_LEGACY = 100 /* 0x64 */, 177 HAL_PHYRX_RSSI_HT = 101 /* 0x65 */, 178 HAL_PHYRX_USER_INFO = 102 /* 0x66 */, 179 HAL_PHYRX_PKT_END = 103 /* 0x67 */, 180 HAL_PHYRX_DEBUG = 104 /* 0x68 */, 181 HAL_PHYRX_CBF_TRANSFER_DONE = 105 /* 0x69 */, 182 HAL_PHYRX_CBF_TRANSFER_ABORT = 106 /* 0x6a */, 183 HAL_PHYRX_L_SIG_A = 107 /* 0x6b */, 184 HAL_PHYRX_L_SIG_B = 108 /* 0x6c */, 185 HAL_PHYRX_HT_SIG = 109 /* 0x6d */, 186 HAL_PHYRX_VHT_SIG_A = 110 /* 0x6e */, 187 HAL_PHYRX_VHT_SIG_B_SU20 = 111 /* 0x6f */, 188 HAL_PHYRX_VHT_SIG_B_SU40 = 112 /* 0x70 */, 189 HAL_PHYRX_VHT_SIG_B_SU80 = 113 /* 0x71 */, 190 HAL_PHYRX_VHT_SIG_B_SU160 = 114 /* 0x72 */, 191 HAL_PHYRX_VHT_SIG_B_MU20 = 115 /* 0x73 */, 192 HAL_PHYRX_VHT_SIG_B_MU40 = 116 /* 0x74 */, 193 HAL_PHYRX_VHT_SIG_B_MU80 = 117 /* 0x75 */, 194 HAL_PHYRX_VHT_SIG_B_MU160 = 118 /* 0x76 */, 195 HAL_PHYRX_HE_SIG_A_SU = 119 /* 0x77 */, 196 HAL_PHYRX_HE_SIG_A_MU_DL = 120 /* 0x78 */, 197 HAL_PHYRX_HE_SIG_A_MU_UL = 121 /* 0x79 */, 198 HAL_PHYRX_HE_SIG_B1_MU = 122 /* 0x7a */, 199 HAL_PHYRX_HE_SIG_B2_MU = 123 /* 0x7b */, 200 HAL_PHYRX_HE_SIG_B2_OFDMA = 124 /* 0x7c */, 201 HAL_PHYRX_OTHER_RECEIVE_INFO = 125 /* 0x7d */, 202 HAL_PHYRX_COMMON_USER_INFO = 126 /* 0x7e */, 203 HAL_PHYRX_DATA_DONE = 127 /* 0x7f */, 204 HAL_COEX_TX_REQ = 128 /* 0x80 */, 205 HAL_DUMMY = 129 /* 0x81 */, 206 HALXAMPLE_TLV_32_NAME = 130 /* 0x82 */, 207 HAL_MPDU_LIMIT = 131 /* 0x83 */, 208 HAL_NA_LENGTH_END = 132 /* 0x84 */, 209 HAL_OLE_BUF_STATUS = 133 /* 0x85 */, 210 HAL_PCU_PPDU_SETUP_DONE = 134 /* 0x86 */, 211 HAL_PCU_PPDU_SETUP_END = 135 /* 0x87 */, 212 HAL_PCU_PPDU_SETUP_INIT = 136 /* 0x88 */, 213 HAL_PCU_PPDU_SETUP_START = 137 /* 0x89 */, 214 HAL_PDG_FES_SETUP = 138 /* 0x8a */, 215 HAL_PDG_RESPONSE = 139 /* 0x8b */, 216 HAL_PDG_TX_REQ = 140 /* 0x8c */, 217 HAL_SCH_WAIT_INSTR = 141 /* 0x8d */, 218 HAL_TQM_FLOWMPTY_STATUS = 143 /* 0x8f */, 219 HAL_TQM_FLOW_NOTMPTY_STATUS = 144 /* 0x90 */, 220 HAL_TQM_GEN_MPDU_LENGTH_LIST = 145 /* 0x91 */, 221 HAL_TQM_GEN_MPDU_LENGTH_LIST_STATUS = 146 /* 0x92 */, 222 HAL_TQM_GEN_MPDUS = 147 /* 0x93 */, 223 HAL_TQM_GEN_MPDUS_STATUS = 148 /* 0x94 */, 224 HAL_TQM_REMOVE_MPDU = 149 /* 0x95 */, 225 HAL_TQM_REMOVE_MPDU_STATUS = 150 /* 0x96 */, 226 HAL_TQM_REMOVE_MSDU = 151 /* 0x97 */, 227 HAL_TQM_REMOVE_MSDU_STATUS = 152 /* 0x98 */, 228 HAL_TQM_UPDATE_TX_MPDU_COUNT = 153 /* 0x99 */, 229 HAL_TQM_WRITE_CMD = 154 /* 0x9a */, 230 HAL_OFDMA_TRIGGER_DETAILS = 155 /* 0x9b */, 231 HAL_TX_DATA = 156 /* 0x9c */, 232 HAL_TX_FES_SETUP = 157 /* 0x9d */, 233 HAL_RX_PACKET = 158 /* 0x9e */, 234 HALXPECTED_RESPONSE = 159 /* 0x9f */, 235 HAL_TX_MPDU_END = 160 /* 0xa0 */, 236 HAL_TX_MPDU_START = 161 /* 0xa1 */, 237 HAL_TX_MSDU_END = 162 /* 0xa2 */, 238 HAL_TX_MSDU_START = 163 /* 0xa3 */, 239 HAL_TX_SW_MODE_SETUP = 164 /* 0xa4 */, 240 HAL_TXPCU_BUFFER_STATUS = 165 /* 0xa5 */, 241 HAL_TXPCU_USER_BUFFER_STATUS = 166 /* 0xa6 */, 242 HAL_DATA_TO_TIME_CONFIG = 167 /* 0xa7 */, 243 HALXAMPLE_USER_TLV_32 = 168 /* 0xa8 */, 244 HAL_MPDU_INFO = 169 /* 0xa9 */, 245 HAL_PDG_USER_SETUP = 170 /* 0xaa */, 246 HAL_TX_11AH_SETUP = 171 /* 0xab */, 247 HAL_REO_UPDATE_RX_REO_QUEUE_STATUS = 172 /* 0xac */, 248 HAL_TX_PEER_ENTRY = 173 /* 0xad */, 249 HAL_TX_RAW_OR_NATIVE_FRAME_SETUP = 174 /* 0xae */, 250 HALXAMPLE_USER_TLV_44 = 175 /* 0xaf */, 251 HAL_TX_FLUSH = 176 /* 0xb0 */, 252 HAL_TX_FLUSH_REQ = 177 /* 0xb1 */, 253 HAL_TQM_WRITE_CMD_STATUS = 178 /* 0xb2 */, 254 HAL_TQM_GET_MPDU_QUEUE_STATS = 179 /* 0xb3 */, 255 HAL_TQM_GET_MSDU_FLOW_STATS = 180 /* 0xb4 */, 256 HALXAMPLE_USER_CTLV_44 = 181 /* 0xb5 */, 257 HAL_TX_FES_STATUS_START = 182 /* 0xb6 */, 258 HAL_TX_FES_STATUS_USER_PPDU = 183 /* 0xb7 */, 259 HAL_TX_FES_STATUS_USER_RESPONSE = 184 /* 0xb8 */, 260 HAL_TX_FES_STATUS_END = 185 /* 0xb9 */, 261 HAL_RX_TRIG_INFO = 186 /* 0xba */, 262 HAL_RXPCU_TX_SETUP_CLEAR = 187 /* 0xbb */, 263 HAL_RX_FRAME_BITMAP_REQ = 188 /* 0xbc */, 264 HAL_RX_FRAME_BITMAP_ACK = 189 /* 0xbd */, 265 HAL_COEX_RX_STATUS = 190 /* 0xbe */, 266 HAL_RX_START_PARAM = 191 /* 0xbf */, 267 HAL_RX_PPDU_START = 192 /* 0xc0 */, 268 HAL_RX_PPDU_END = 193 /* 0xc1 */, 269 HAL_RX_MPDU_START = 194 /* 0xc2 */, 270 HAL_RX_MPDU_END = 195 /* 0xc3 */, 271 HAL_RX_MSDU_START = 196 /* 0xc4 */, 272 HAL_RX_MSDU_END = 197 /* 0xc5 */, 273 HAL_RX_ATTENTION = 198 /* 0xc6 */, 274 HAL_RECEIVED_RESPONSE_INFO = 199 /* 0xc7 */, 275 HAL_RX_PHY_SLEEP = 200 /* 0xc8 */, 276 HAL_RX_HEADER = 201 /* 0xc9 */, 277 HAL_RX_PEER_ENTRY = 202 /* 0xca */, 278 HAL_RX_FLUSH = 203 /* 0xcb */, 279 HAL_RX_RESPONSE_REQUIRED_INFO = 204 /* 0xcc */, 280 HAL_RX_FRAMELESS_BAR_DETAILS = 205 /* 0xcd */, 281 HAL_TQM_GET_MPDU_QUEUE_STATS_STATUS = 206 /* 0xce */, 282 HAL_TQM_GET_MSDU_FLOW_STATS_STATUS = 207 /* 0xcf */, 283 HAL_TX_CBF_INFO = 208 /* 0xd0 */, 284 HAL_PCU_PPDU_SETUP_USER = 209 /* 0xd1 */, 285 HAL_RX_MPDU_PCU_START = 210 /* 0xd2 */, 286 HAL_RX_PM_INFO = 211 /* 0xd3 */, 287 HAL_RX_USER_PPDU_END = 212 /* 0xd4 */, 288 HAL_RX_PRE_PPDU_START = 213 /* 0xd5 */, 289 HAL_RX_PREAMBLE = 214 /* 0xd6 */, 290 HAL_TX_FES_SETUP_COMPLETE = 215 /* 0xd7 */, 291 HAL_TX_LAST_MPDU_FETCHED = 216 /* 0xd8 */, 292 HAL_TXDMA_STOP_REQUEST = 217 /* 0xd9 */, 293 HAL_RXPCU_SETUP = 218 /* 0xda */, 294 HAL_RXPCU_USER_SETUP = 219 /* 0xdb */, 295 HAL_TX_FES_STATUS_ACK_OR_BA = 220 /* 0xdc */, 296 HAL_TQM_ACKED_MPDU = 221 /* 0xdd */, 297 HAL_COEX_TX_RESP = 222 /* 0xde */, 298 HAL_COEX_TX_STATUS = 223 /* 0xdf */, 299 HAL_MACTX_COEX_PHY_CTRL = 224 /* 0xe0 */, 300 HAL_COEX_STATUS_BROADCAST = 225 /* 0xe1 */, 301 HAL_RESPONSE_START_STATUS = 226 /* 0xe2 */, 302 HAL_RESPONSEND_STATUS = 227 /* 0xe3 */, 303 HAL_CRYPTO_STATUS = 228 /* 0xe4 */, 304 HAL_RECEIVED_TRIGGER_INFO = 229 /* 0xe5 */, 305 HAL_COEX_TX_STOP_CTRL = 230 /* 0xe6 */, 306 HAL_RX_PPDU_ACK_REPORT = 231 /* 0xe7 */, 307 HAL_RX_PPDU_NO_ACK_REPORT = 232 /* 0xe8 */, 308 HAL_SCH_COEX_STATUS = 233 /* 0xe9 */, 309 HAL_SCHEDULER_COMMAND_STATUS = 234 /* 0xea */, 310 HAL_SCHEDULER_RX_PPDU_NO_RESPONSE_STATUS = 235 /* 0xeb */, 311 HAL_TX_FES_STATUS_PROT = 236 /* 0xec */, 312 HAL_TX_FES_STATUS_START_PPDU = 237 /* 0xed */, 313 HAL_TX_FES_STATUS_START_PROT = 238 /* 0xee */, 314 HAL_TXPCU_PHYTX_DEBUG32 = 239 /* 0xef */, 315 HAL_TXPCU_PHYTX_OTHER_TRANSMIT_INFO32 = 240 /* 0xf0 */, 316 HAL_TX_MPDU_COUNT_TRANSFERND = 241 /* 0xf1 */, 317 HAL_WHO_ANCHOR_OFFSET = 242 /* 0xf2 */, 318 HAL_WHO_ANCHOR_VALUE = 243 /* 0xf3 */, 319 HAL_WHO_CCE_INFO = 244 /* 0xf4 */, 320 HAL_WHO_COMMIT = 245 /* 0xf5 */, 321 HAL_WHO_COMMIT_DONE = 246 /* 0xf6 */, 322 HAL_WHO_FLUSH = 247 /* 0xf7 */, 323 HAL_WHO_L2_LLC = 248 /* 0xf8 */, 324 HAL_WHO_L2_PAYLOAD = 249 /* 0xf9 */, 325 HAL_WHO_L3_CHECKSUM = 250 /* 0xfa */, 326 HAL_WHO_L3_INFO = 251 /* 0xfb */, 327 HAL_WHO_L4_CHECKSUM = 252 /* 0xfc */, 328 HAL_WHO_L4_INFO = 253 /* 0xfd */, 329 HAL_WHO_MSDU = 254 /* 0xfe */, 330 HAL_WHO_MSDU_MISC = 255 /* 0xff */, 331 HAL_WHO_PACKET_DATA = 256 /* 0x100 */, 332 HAL_WHO_PACKET_HDR = 257 /* 0x101 */, 333 HAL_WHO_PPDU_END = 258 /* 0x102 */, 334 HAL_WHO_PPDU_START = 259 /* 0x103 */, 335 HAL_WHO_TSO = 260 /* 0x104 */, 336 HAL_WHO_WMAC_HEADER_PV0 = 261 /* 0x105 */, 337 HAL_WHO_WMAC_HEADER_PV1 = 262 /* 0x106 */, 338 HAL_WHO_WMAC_IV = 263 /* 0x107 */, 339 HAL_MPDU_INFO_END = 264 /* 0x108 */, 340 HAL_MPDU_INFO_BITMAP = 265 /* 0x109 */, 341 HAL_TX_QUEUE_EXTENSION = 266 /* 0x10a */, 342 HAL_SCHEDULER_SELFGEN_RESPONSE_STATUS = 267 /* 0x10b */, 343 HAL_TQM_UPDATE_TX_MPDU_COUNT_STATUS = 268 /* 0x10c */, 344 HAL_TQM_ACKED_MPDU_STATUS = 269 /* 0x10d */, 345 HAL_TQM_ADD_MSDU_STATUS = 270 /* 0x10e */, 346 HAL_TQM_LIST_GEN_DONE = 271 /* 0x10f */, 347 HAL_WHO_TERMINATE = 272 /* 0x110 */, 348 HAL_TX_LAST_MPDU_END = 273 /* 0x111 */, 349 HAL_TX_CV_DATA = 274 /* 0x112 */, 350 HAL_PPDU_TX_END = 275 /* 0x113 */, 351 HAL_PROT_TX_END = 276 /* 0x114 */, 352 HAL_MPDU_INFO_GLOBAL_END = 277 /* 0x115 */, 353 HAL_TQM_SCH_INSTR_GLOBAL_END = 278 /* 0x116 */, 354 HAL_RX_PPDU_END_USER_STATS = 279 /* 0x117 */, 355 HAL_RX_PPDU_END_USER_STATS_EXT = 280 /* 0x118 */, 356 HAL_REO_GET_QUEUE_STATS = 281 /* 0x119 */, 357 HAL_REO_FLUSH_QUEUE = 282 /* 0x11a */, 358 HAL_REO_FLUSH_CACHE = 283 /* 0x11b */, 359 HAL_REO_UNBLOCK_CACHE = 284 /* 0x11c */, 360 HAL_REO_GET_QUEUE_STATS_STATUS = 285 /* 0x11d */, 361 HAL_REO_FLUSH_QUEUE_STATUS = 286 /* 0x11e */, 362 HAL_REO_FLUSH_CACHE_STATUS = 287 /* 0x11f */, 363 HAL_REO_UNBLOCK_CACHE_STATUS = 288 /* 0x120 */, 364 HAL_TQM_FLUSH_CACHE = 289 /* 0x121 */, 365 HAL_TQM_UNBLOCK_CACHE = 290 /* 0x122 */, 366 HAL_TQM_FLUSH_CACHE_STATUS = 291 /* 0x123 */, 367 HAL_TQM_UNBLOCK_CACHE_STATUS = 292 /* 0x124 */, 368 HAL_RX_PPDU_END_STATUS_DONE = 293 /* 0x125 */, 369 HAL_RX_STATUS_BUFFER_DONE = 294 /* 0x126 */, 370 HAL_TX_DATA_SYNC = 297 /* 0x129 */, 371 HAL_PHYRX_CBF_READ_REQUEST_ACK = 298 /* 0x12a */, 372 HAL_TQM_GET_MPDU_HEAD_INFO = 299 /* 0x12b */, 373 HAL_TQM_SYNC_CMD = 300 /* 0x12c */, 374 HAL_TQM_GET_MPDU_HEAD_INFO_STATUS = 301 /* 0x12d */, 375 HAL_TQM_SYNC_CMD_STATUS = 302 /* 0x12e */, 376 HAL_TQM_THRESHOLD_DROP_NOTIFICATION_STATUS = 303 /* 0x12f */, 377 HAL_TQM_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 304 /* 0x130 */, 378 HAL_REO_FLUSH_TIMEOUT_LIST = 305 /* 0x131 */, 379 HAL_REO_FLUSH_TIMEOUT_LIST_STATUS = 306 /* 0x132 */, 380 HAL_REO_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 307 /* 0x133 */, 381 HAL_SCHEDULER_RX_SIFS_RESPONSE_TRIGGER_STATUS = 308 /* 0x134 */, 382 HALXAMPLE_USER_TLV_32_NAME = 309 /* 0x135 */, 383 HAL_RX_PPDU_START_USER_INFO = 310 /* 0x136 */, 384 HAL_RX_RING_MASK = 311 /* 0x137 */, 385 HAL_COEX_MAC_NAP = 312 /* 0x138 */, 386 HAL_RXPCU_PPDU_END_INFO = 313 /* 0x139 */, 387 HAL_WHO_MESH_CONTROL = 314 /* 0x13a */, 388 HAL_PDG_SW_MODE_BW_START = 315 /* 0x13b */, 389 HAL_PDG_SW_MODE_BW_END = 316 /* 0x13c */, 390 HAL_PDG_WAIT_FOR_MAC_REQUEST = 317 /* 0x13d */, 391 HAL_PDG_WAIT_FOR_PHY_REQUEST = 318 /* 0x13e */, 392 HAL_SCHEDULER_END = 319 /* 0x13f */, 393 HAL_RX_PPDU_START_DROPPED = 320 /* 0x140 */, 394 HAL_RX_PPDU_END_DROPPED = 321 /* 0x141 */, 395 HAL_RX_PPDU_END_STATUS_DONE_DROPPED = 322 /* 0x142 */, 396 HAL_RX_MPDU_START_DROPPED = 323 /* 0x143 */, 397 HAL_RX_MSDU_START_DROPPED = 324 /* 0x144 */, 398 HAL_RX_MSDU_END_DROPPED = 325 /* 0x145 */, 399 HAL_RX_MPDU_END_DROPPED = 326 /* 0x146 */, 400 HAL_RX_ATTENTION_DROPPED = 327 /* 0x147 */, 401 HAL_TXPCU_USER_SETUP = 328 /* 0x148 */, 402 HAL_RXPCU_USER_SETUP_EXT = 329 /* 0x149 */, 403 HAL_CMD_PART_0_END = 330 /* 0x14a */, 404 HAL_MACTX_SYNTH_ON = 331 /* 0x14b */, 405 HAL_SCH_CRITICAL_TLV_REFERENCE = 332 /* 0x14c */, 406 HAL_TQM_MPDU_GLOBAL_START = 333 /* 0x14d */, 407 HALXAMPLE_TLV_32 = 334 /* 0x14e */, 408 HAL_TQM_UPDATE_TX_MSDU_FLOW = 335 /* 0x14f */, 409 HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD = 336 /* 0x150 */, 410 HAL_TQM_UPDATE_TX_MSDU_FLOW_STATUS = 337 /* 0x151 */, 411 HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD_STATUS = 338 /* 0x152 */, 412 HAL_REO_UPDATE_RX_REO_QUEUE = 339 /* 0x153 */, 413 HAL_TQM_MPDU_QUEUEMPTY_STATUS = 340 /* 0x154 */, 414 HAL_TQM_2_SCH_MPDU_AVAILABLE = 341 /* 0x155 */, 415 HAL_PDG_TRIG_RESPONSE = 342 /* 0x156 */, 416 HAL_TRIGGER_RESPONSE_TX_DONE = 343 /* 0x157 */, 417 HAL_ABORT_FROM_PHYRX_DETAILS = 344 /* 0x158 */, 418 HAL_SCH_TQM_CMD_WRAPPER = 345 /* 0x159 */, 419 HAL_MPDUS_AVAILABLE = 346 /* 0x15a */, 420 HAL_RECEIVED_RESPONSE_INFO_PART2 = 347 /* 0x15b */, 421 HAL_PHYRX_TX_START_TIMING = 348 /* 0x15c */, 422 HAL_TXPCU_PREAMBLE_DONE = 349 /* 0x15d */, 423 HAL_NDP_PREAMBLE_DONE = 350 /* 0x15e */, 424 HAL_SCH_TQM_CMD_WRAPPER_RBO_DROP = 351 /* 0x15f */, 425 HAL_SCH_TQM_CMD_WRAPPER_CONT_DROP = 352 /* 0x160 */, 426 HAL_MACTX_CLEAR_PREV_TX_INFO = 353 /* 0x161 */, 427 HAL_TX_PUNCTURE_SETUP = 354 /* 0x162 */, 428 HAL_R2R_STATUS_END = 355 /* 0x163 */, 429 HAL_MACTX_PREFETCH_CV_COMMON = 356 /* 0x164 */, 430 HAL_END_OF_FLUSH_MARKER = 357 /* 0x165 */, 431 HAL_MACTX_MU_UPLINK_COMMON_PUNC = 358 /* 0x166 */, 432 HAL_MACTX_MU_UPLINK_USER_SETUP_PUNC = 359 /* 0x167 */, 433 HAL_RECEIVED_RESPONSE_USER_7_0 = 360 /* 0x168 */, 434 HAL_RECEIVED_RESPONSE_USER_15_8 = 361 /* 0x169 */, 435 HAL_RECEIVED_RESPONSE_USER_23_16 = 362 /* 0x16a */, 436 HAL_RECEIVED_RESPONSE_USER_31_24 = 363 /* 0x16b */, 437 HAL_RECEIVED_RESPONSE_USER_36_32 = 364 /* 0x16c */, 438 HAL_TX_LOOPBACK_SETUP = 365 /* 0x16d */, 439 HAL_PHYRX_OTHER_RECEIVE_INFO_RU_DETAILS = 366 /* 0x16e */, 440 HAL_SCH_WAIT_INSTR_TX_PATH = 367 /* 0x16f */, 441 HAL_MACTX_OTHER_TRANSMIT_INFO_TX2TX = 368 /* 0x170 */, 442 HAL_MACTX_OTHER_TRANSMIT_INFOMUPHY_SETUP = 369 /* 0x171 */, 443 HAL_PHYRX_OTHER_RECEIVE_INFOVM_DETAILS = 370 /* 0x172 */, 444 HAL_TX_WUR_DATA = 371 /* 0x173 */, 445 HAL_RX_PPDU_END_START = 372 /* 0x174 */, 446 HAL_RX_PPDU_END_MIDDLE = 373 /* 0x175 */, 447 HAL_RX_PPDU_END_LAST = 374 /* 0x176 */, 448 HAL_MACTX_BACKOFF_BASED_TRANSMISSION = 375 /* 0x177 */, 449 HAL_MACTX_OTHER_TRANSMIT_INFO_DL_OFDMA_TX = 376 /* 0x178 */, 450 HAL_SRP_INFO = 377 /* 0x179 */, 451 HAL_OBSS_SR_INFO = 378 /* 0x17a */, 452 HAL_SCHEDULER_SW_MSG_STATUS = 379 /* 0x17b */, 453 HAL_HWSCH_RXPCU_MAC_INFO_ANNOUNCEMENT = 380 /* 0x17c */, 454 HAL_RXPCU_SETUP_COMPLETE = 381 /* 0x17d */, 455 HAL_SNOOP_PPDU_START = 382 /* 0x17e */, 456 HAL_SNOOP_MPDU_USR_DBG_INFO = 383 /* 0x17f */, 457 HAL_SNOOP_MSDU_USR_DBG_INFO = 384 /* 0x180 */, 458 HAL_SNOOP_MSDU_USR_DATA = 385 /* 0x181 */, 459 HAL_SNOOP_MPDU_USR_STAT_INFO = 386 /* 0x182 */, 460 HAL_SNOOP_PPDU_END = 387 /* 0x183 */, 461 HAL_SNOOP_SPARE = 388 /* 0x184 */, 462 HAL_PHYRX_OTHER_RECEIVE_INFO_MU_RSSI_COMMON = 390 /* 0x186 */, 463 HAL_PHYRX_OTHER_RECEIVE_INFO_MU_RSSI_USER = 391 /* 0x187 */, 464 HAL_MACTX_OTHER_TRANSMIT_INFO_SCH_DETAILS = 392 /* 0x188 */, 465 HAL_PHYRX_OTHER_RECEIVE_INFO_108PVM_DETAILS = 393 /* 0x189 */, 466 HAL_SCH_TLV_WRAPPER = 394 /* 0x18a */, 467 HAL_SCHEDULER_STATUS_WRAPPER = 395 /* 0x18b */, 468 HAL_MPDU_INFO_6X = 396 /* 0x18c */, 469 HAL_MACTX_11AZ_USER_DESC_PER_USER = 397 /* 0x18d */, 470 HAL_MACTX_U_SIGHT_SU_MU = 398 /* 0x18e */, 471 HAL_MACTX_U_SIGHT_TB = 399 /* 0x18f */, 472 HAL_PHYRX_U_SIGHT_SU_MU = 403 /* 0x193 */, 473 HAL_PHYRX_U_SIGHT_TB = 404 /* 0x194 */, 474 HAL_MACRX_LMR_READ_REQUEST = 408 /* 0x198 */, 475 HAL_MACRX_LMR_DATA_REQUEST = 409 /* 0x199 */, 476 HAL_PHYRX_LMR_TRANSFER_DONE = 410 /* 0x19a */, 477 HAL_PHYRX_LMR_TRANSFER_ABORT = 411 /* 0x19b */, 478 HAL_PHYRX_LMR_READ_REQUEST_ACK = 412 /* 0x19c */, 479 HAL_MACRX_SECURE_LTF_SEQ_PTR = 413 /* 0x19d */, 480 HAL_PHYRX_USER_INFO_MU_UL = 414 /* 0x19e */, 481 HAL_MPDU_QUEUE_OVERVIEW = 415 /* 0x19f */, 482 HAL_SCHEDULER_NAV_INFO = 416 /* 0x1a0 */, 483 HAL_LMR_PEER_ENTRY = 418 /* 0x1a2 */, 484 HAL_LMR_MPDU_START = 419 /* 0x1a3 */, 485 HAL_LMR_DATA = 420 /* 0x1a4 */, 486 HAL_LMR_MPDU_END = 421 /* 0x1a5 */, 487 HAL_REO_GET_QUEUE_1K_STATS_STATUS = 422 /* 0x1a6 */, 488 HAL_RX_FRAME_1K_BITMAP_ACK = 423 /* 0x1a7 */, 489 HAL_TX_FES_STATUS_1K_BA = 424 /* 0x1a8 */, 490 HAL_TQM_ACKED_1K_MPDU = 425 /* 0x1a9 */, 491 HAL_MACRX_INBSS_OBSS_IND = 426 /* 0x1aa */, 492 HAL_PHYRX_LOCATION = 427 /* 0x1ab */, 493 HAL_MLO_TX_NOTIFICATION_SU = 428 /* 0x1ac */, 494 HAL_MLO_TX_NOTIFICATION_MU = 429 /* 0x1ad */, 495 HAL_MLO_TX_REQ_SU = 430 /* 0x1ae */, 496 HAL_MLO_TX_REQ_MU = 431 /* 0x1af */, 497 HAL_MLO_TX_RESP = 432 /* 0x1b0 */, 498 HAL_MLO_RX_NOTIFICATION = 433 /* 0x1b1 */, 499 HAL_MLO_BKOFF_TRUNC_REQ = 434 /* 0x1b2 */, 500 HAL_MLO_TBTT_NOTIFICATION = 435 /* 0x1b3 */, 501 HAL_MLO_MESSAGE = 436 /* 0x1b4 */, 502 HAL_MLO_TS_SYNC_MSG = 437 /* 0x1b5 */, 503 HAL_MLO_FES_SETUP = 438 /* 0x1b6 */, 504 HAL_MLO_PDG_FES_SETUP_SU = 439 /* 0x1b7 */, 505 HAL_MLO_PDG_FES_SETUP_MU = 440 /* 0x1b8 */, 506 HAL_MPDU_INFO_1K_BITMAP = 441 /* 0x1b9 */, 507 HAL_MON_BUF_ADDR = 442 /* 0x1ba */, 508 HAL_TX_FRAG_STATE = 443 /* 0x1bb */, 509 HAL_MACTXHT_SIG_USR_OFDMA = 446 /* 0x1be */, 510 HAL_PHYRXHT_SIG_CMN_PUNC = 448 /* 0x1c0 */, 511 HAL_PHYRXHT_SIG_CMN_OFDMA = 450 /* 0x1c2 */, 512 HAL_PHYRXHT_SIG_USR_OFDMA = 454 /* 0x1c6 */, 513 HAL_PHYRX_PKT_END_PART1 = 456 /* 0x1c8 */, 514 HAL_MACTXXPECT_NDP_RECEPTION = 457 /* 0x1c9 */, 515 HAL_MACTX_SECURE_LTF_SEQ_PTR = 458 /* 0x1ca */, 516 HAL_MLO_PDG_BKOFF_TRUNC_NOTIFY = 460 /* 0x1cc */, 517 HAL_PHYRX_11AZ_INTEGRITY_DATA = 461 /* 0x1cd */, 518 HAL_PHYTX_LOCATION = 462 /* 0x1ce */, 519 HAL_PHYTX_11AZ_INTEGRITY_DATA = 463 /* 0x1cf */, 520 HAL_MACTXHT_SIG_USR_SU = 466 /* 0x1d2 */, 521 HAL_MACTXHT_SIG_USR_MU_MIMO = 467 /* 0x1d3 */, 522 HAL_PHYRXHT_SIG_USR_SU = 468 /* 0x1d4 */, 523 HAL_PHYRXHT_SIG_USR_MU_MIMO = 469 /* 0x1d5 */, 524 HAL_PHYRX_GENERIC_U_SIG = 470 /* 0x1d6 */, 525 HAL_PHYRX_GENERICHT_SIG = 471 /* 0x1d7 */, 526 HAL_OVERWRITE_RESP_START = 472 /* 0x1d8 */, 527 HAL_OVERWRITE_RESP_PREAMBLE_INFO = 473 /* 0x1d9 */, 528 HAL_OVERWRITE_RESP_FRAME_INFO = 474 /* 0x1da */, 529 HAL_OVERWRITE_RESP_END = 475 /* 0x1db */, 530 HAL_RXPCUARLY_RX_INDICATION = 476 /* 0x1dc */, 531 HAL_MON_DROP = 477 /* 0x1dd */, 532 HAL_MACRX_MU_UPLINK_COMMON_SNIFF = 478 /* 0x1de */, 533 HAL_MACRX_MU_UPLINK_USER_SETUP_SNIFF = 479 /* 0x1df */, 534 HAL_MACRX_MU_UPLINK_USER_SEL_SNIFF = 480 /* 0x1e0 */, 535 HAL_MACRX_MU_UPLINK_FCS_STATUS_SNIFF = 481 /* 0x1e1 */, 536 HAL_MACTX_PREFETCH_CV_DMA = 482 /* 0x1e2 */, 537 HAL_MACTX_PREFETCH_CV_PER_USER = 483 /* 0x1e3 */, 538 HAL_PHYRX_OTHER_RECEIVE_INFO_ALL_SIGB_DETAILS = 484 /* 0x1e4 */, 539 HAL_MACTX_BF_PARAMS_UPDATE_COMMON = 485 /* 0x1e5 */, 540 HAL_MACTX_BF_PARAMS_UPDATE_PER_USER = 486 /* 0x1e6 */, 541 HAL_RANGING_USER_DETAILS = 487 /* 0x1e7 */, 542 HAL_PHYTX_CV_CORR_STATUS = 488 /* 0x1e8 */, 543 HAL_PHYTX_CV_CORR_COMMON = 489 /* 0x1e9 */, 544 HAL_PHYTX_CV_CORR_USER = 490 /* 0x1ea */, 545 HAL_MACTX_CV_CORR_COMMON = 491 /* 0x1eb */, 546 HAL_MACTX_CV_CORR_MAC_INFO_GROUP = 492 /* 0x1ec */, 547 HAL_BW_PUNCTUREVAL_WRAPPER = 493 /* 0x1ed */, 548 HAL_MACTX_RX_NOTIFICATION_FOR_PHY = 494 /* 0x1ee */, 549 HAL_MACTX_TX_NOTIFICATION_FOR_PHY = 495 /* 0x1ef */, 550 HAL_MACTX_MU_UPLINK_COMMON_PER_BW = 496 /* 0x1f0 */, 551 HAL_MACTX_MU_UPLINK_USER_SETUP_PER_BW = 497 /* 0x1f1 */, 552 HAL_RX_PPDU_END_USER_STATS_EXT2 = 498 /* 0x1f2 */, 553 HAL_FW2SW_MON = 499 /* 0x1f3 */, 554 HAL_WSI_DIRECT_MESSAGE = 500 /* 0x1f4 */, 555 HAL_MACTXMLSR_PRE_SWITCH = 501 /* 0x1f5 */, 556 HAL_MACTXMLSR_SWITCH = 502 /* 0x1f6 */, 557 HAL_MACTXMLSR_SWITCH_BACK = 503 /* 0x1f7 */, 558 HAL_PHYTXMLSR_SWITCH_ACK = 504 /* 0x1f8 */, 559 HAL_PHYTXMLSR_SWITCH_BACK_ACK = 505 /* 0x1f9 */, 560 HAL_SPARE_REUSE_TAG_0 = 506 /* 0x1fa */, 561 HAL_SPARE_REUSE_TAG_1 = 507 /* 0x1fb */, 562 HAL_SPARE_REUSE_TAG_2 = 508 /* 0x1fc */, 563 HAL_SPARE_REUSE_TAG_3 = 509 /* 0x1fd */, 564 /* FIXME: Assign correct value for HAL_TCL_DATA_CMD */ 565 HAL_TCL_DATA_CMD = 510, 566 HAL_TLV_BASE = 511 /* 0x1ff */, 567 }; 568 569 #define HAL_TLV_HDR_TAG GENMASK(9, 1) 570 #define HAL_TLV_HDR_LEN GENMASK(25, 10) 571 #define HAL_TLV_USR_ID GENMASK(31, 26) 572 573 #define HAL_TLV_ALIGN 4 574 575 struct hal_tlv_hdr { 576 __le32 tl; 577 u8 value[]; 578 } __packed; 579 580 #define HAL_TLV_64_HDR_TAG GENMASK(9, 1) 581 #define HAL_TLV_64_HDR_LEN GENMASK(21, 10) 582 583 struct hal_tlv_64_hdr { 584 u64 tl; 585 u8 value[]; 586 } __packed; 587 588 #define RX_MPDU_DESC_INFO0_MSDU_COUNT GENMASK(7, 0) 589 #define RX_MPDU_DESC_INFO0_FRAG_FLAG BIT(8) 590 #define RX_MPDU_DESC_INFO0_MPDU_RETRY BIT(9) 591 #define RX_MPDU_DESC_INFO0_AMPDU_FLAG BIT(10) 592 #define RX_MPDU_DESC_INFO0_BAR_FRAME BIT(11) 593 #define RX_MPDU_DESC_INFO0_VALID_PN BIT(12) 594 #define RX_MPDU_DESC_INFO0_RAW_MPDU BIT(13) 595 #define RX_MPDU_DESC_INFO0_MORE_FRAG_FLAG BIT(14) 596 #define RX_MPDU_DESC_INFO0_SRC_INFO GENMASK(26, 15) 597 #define RX_MPDU_DESC_INFO0_MPDU_QOS_CTRL_VALID BIT(27) 598 #define RX_MPDU_DESC_INFO0_TID GENMASK(31, 28) 599 600 /* Peer Metadata classification */ 601 602 /* Version 0 */ 603 #define RX_MPDU_DESC_META_DATA_V0_PEER_ID GENMASK(15, 0) 604 #define RX_MPDU_DESC_META_DATA_V0_VDEV_ID GENMASK(23, 16) 605 606 /* Version 1 */ 607 #define RX_MPDU_DESC_META_DATA_V1_PEER_ID GENMASK(13, 0) 608 #define RX_MPDU_DESC_META_DATA_V1_LOGICAL_LINK_ID GENMASK(15, 14) 609 #define RX_MPDU_DESC_META_DATA_V1_VDEV_ID GENMASK(23, 16) 610 #define RX_MPDU_DESC_META_DATA_V1_LMAC_ID GENMASK(25, 24) 611 #define RX_MPDU_DESC_META_DATA_V1_DEVICE_ID GENMASK(28, 26) 612 613 /* Version 1A */ 614 #define RX_MPDU_DESC_META_DATA_V1A_PEER_ID GENMASK(13, 0) 615 #define RX_MPDU_DESC_META_DATA_V1A_VDEV_ID GENMASK(21, 14) 616 #define RX_MPDU_DESC_META_DATA_V1A_LOGICAL_LINK_ID GENMASK(25, 22) 617 #define RX_MPDU_DESC_META_DATA_V1A_DEVICE_ID GENMASK(28, 26) 618 619 /* Version 1B */ 620 #define RX_MPDU_DESC_META_DATA_V1B_PEER_ID GENMASK(13, 0) 621 #define RX_MPDU_DESC_META_DATA_V1B_VDEV_ID GENMASK(21, 14) 622 #define RX_MPDU_DESC_META_DATA_V1B_HW_LINK_ID GENMASK(25, 22) 623 #define RX_MPDU_DESC_META_DATA_V1B_DEVICE_ID GENMASK(28, 26) 624 625 struct rx_mpdu_desc { 626 __le32 info0; /* %RX_MPDU_DESC_INFO */ 627 __le32 peer_meta_data; 628 } __packed; 629 630 /* rx_mpdu_desc 631 * Producer: RXDMA 632 * Consumer: REO/SW/FW 633 * 634 * msdu_count 635 * The number of MSDUs within the MPDU 636 * 637 * fragment_flag 638 * When set, this MPDU is a fragment and REO should forward this 639 * fragment MPDU to the REO destination ring without any reorder 640 * checks, pn checks or bitmap update. This implies that REO is 641 * forwarding the pointer to the MSDU link descriptor. 642 * 643 * mpdu_retry_bit 644 * The retry bit setting from the MPDU header of the received frame 645 * 646 * ampdu_flag 647 * Indicates the MPDU was received as part of an A-MPDU. 648 * 649 * bar_frame 650 * Indicates the received frame is a BAR frame. After processing, 651 * this frame shall be pushed to SW or deleted. 652 * 653 * valid_pn 654 * When not set, REO will not perform a PN sequence number check. 655 * 656 * raw_mpdu 657 * Field only valid when first_msdu_in_mpdu_flag is set. Indicates 658 * the contents in the MSDU buffer contains a 'RAW' MPDU. This 659 * 'RAW' MPDU might be spread out over multiple MSDU buffers. 660 * 661 * more_fragment_flag 662 * The More Fragment bit setting from the MPDU header of the 663 * received frame 664 * 665 * src_info 666 * Source (Virtual) device/interface info associated with this peer. 667 * This field gets passed on by REO to PPE in the EDMA descriptor. 668 * 669 * mpdu_qos_control_valid 670 * When set, the MPDU has a QoS control field 671 * 672 * tid 673 * Field only valid when mpdu_qos_control_valid is set 674 */ 675 676 enum hal_rx_msdu_desc_reo_dest_ind { 677 HAL_RX_MSDU_DESC_REO_DEST_IND_TCL, 678 HAL_RX_MSDU_DESC_REO_DEST_IND_SW1, 679 HAL_RX_MSDU_DESC_REO_DEST_IND_SW2, 680 HAL_RX_MSDU_DESC_REO_DEST_IND_SW3, 681 HAL_RX_MSDU_DESC_REO_DEST_IND_SW4, 682 HAL_RX_MSDU_DESC_REO_DEST_IND_RELEASE, 683 HAL_RX_MSDU_DESC_REO_DEST_IND_FW, 684 HAL_RX_MSDU_DESC_REO_DEST_IND_SW5, 685 HAL_RX_MSDU_DESC_REO_DEST_IND_SW6, 686 HAL_RX_MSDU_DESC_REO_DEST_IND_SW7, 687 HAL_RX_MSDU_DESC_REO_DEST_IND_SW8, 688 }; 689 690 #define RX_MSDU_DESC_INFO0_FIRST_MSDU_IN_MPDU BIT(0) 691 #define RX_MSDU_DESC_INFO0_LAST_MSDU_IN_MPDU BIT(1) 692 #define RX_MSDU_DESC_INFO0_MSDU_CONTINUATION BIT(2) 693 #define RX_MSDU_DESC_INFO0_MSDU_LENGTH GENMASK(16, 3) 694 #define RX_MSDU_DESC_INFO0_MSDU_DROP BIT(17) 695 #define RX_MSDU_DESC_INFO0_VALID_SA BIT(18) 696 #define RX_MSDU_DESC_INFO0_VALID_DA BIT(19) 697 #define RX_MSDU_DESC_INFO0_DA_MCBC BIT(20) 698 #define RX_MSDU_DESC_INFO0_L3_HDR_PAD_MSB BIT(21) 699 #define RX_MSDU_DESC_INFO0_TCP_UDP_CHKSUM_FAIL BIT(22) 700 #define RX_MSDU_DESC_INFO0_IP_CHKSUM_FAIL BIT(23) 701 #define RX_MSDU_DESC_INFO0_FROM_DS BIT(24) 702 #define RX_MSDU_DESC_INFO0_TO_DS BIT(25) 703 #define RX_MSDU_DESC_INFO0_INTRA_BSS BIT(26) 704 #define RX_MSDU_DESC_INFO0_DST_CHIP_ID GENMASK(28, 27) 705 #define RX_MSDU_DESC_INFO0_DECAP_FORMAT GENMASK(30, 29) 706 707 #define HAL_RX_MSDU_PKT_LENGTH_GET(val) \ 708 (le32_get_bits((val), RX_MSDU_DESC_INFO0_MSDU_LENGTH)) 709 710 struct rx_msdu_desc { 711 __le32 info0; 712 } __packed; 713 714 /* rx_msdu_desc 715 * 716 * first_msdu_in_mpdu 717 * Indicates first msdu in mpdu. 718 * 719 * last_msdu_in_mpdu 720 * Indicates last msdu in mpdu. This flag can be true only when 721 * 'Msdu_continuation' set to 0. This implies that when an msdu 722 * is spread out over multiple buffers and thus msdu_continuation 723 * is set, only for the very last buffer of the msdu, can the 724 * 'last_msdu_in_mpdu' be set. 725 * 726 * When both first_msdu_in_mpdu and last_msdu_in_mpdu are set, 727 * the MPDU that this MSDU belongs to only contains a single MSDU. 728 * 729 * msdu_continuation 730 * When set, this MSDU buffer was not able to hold the entire MSDU. 731 * The next buffer will therefore contain additional information 732 * related to this MSDU. 733 * 734 * msdu_length 735 * Field is only valid in combination with the 'first_msdu_in_mpdu' 736 * being set. Full MSDU length in bytes after decapsulation. This 737 * field is still valid for MPDU frames without A-MSDU. It still 738 * represents MSDU length after decapsulation Or in case of RAW 739 * MPDUs, it indicates the length of the entire MPDU (without FCS 740 * field). 741 * 742 * msdu_drop 743 * Indicates that REO shall drop this MSDU and not forward it to 744 * any other ring. 745 * 746 * valid_sa 747 * Indicates OLE found a valid SA entry for this MSDU. 748 * 749 * valid_da 750 * When set, OLE found a valid DA entry for this MSDU. 751 * 752 * da_mcbc 753 * Field Only valid if valid_da is set. Indicates the DA address 754 * is a Multicast or Broadcast address for this MSDU. 755 * 756 * l3_header_padding_msb 757 * Passed on from 'RX_MSDU_END' TLV (only the MSB is reported as 758 * the LSB is always zero). Number of bytes padded to make sure 759 * that the L3 header will always start of a Dword boundary 760 * 761 * tcp_udp_checksum_fail 762 * Passed on from 'RX_ATTENTION' TLV 763 * Indicates that the computed checksum did not match the checksum 764 * in the TCP/UDP header. 765 * 766 * ip_checksum_fail 767 * Passed on from 'RX_ATTENTION' TLV 768 * Indicates that the computed checksum did not match the checksum 769 * in the IP header. 770 * 771 * from_DS 772 * Set if the 'from DS' bit is set in the frame control. 773 * 774 * to_DS 775 * Set if the 'to DS' bit is set in the frame control. 776 * 777 * intra_bss 778 * This packet needs intra-BSS routing by SW as the 'vdev_id' 779 * for the destination is the same as the 'vdev_id' that this 780 * MSDU was got in. 781 * 782 * dest_chip_id 783 * If intra_bss is set, copied by RXOLE/RXDMA from 'ADDR_SEARCH_ENTRY' 784 * to support intra-BSS routing with multi-chip multi-link operation. 785 * This indicates into which chip's TCL the packet should be queued. 786 * 787 * decap_format 788 * Indicates the format after decapsulation: 789 */ 790 791 #define RX_MSDU_EXT_DESC_INFO0_REO_DEST_IND GENMASK(4, 0) 792 #define RX_MSDU_EXT_DESC_INFO0_SERVICE_CODE GENMASK(13, 5) 793 #define RX_MSDU_EXT_DESC_INFO0_PRIORITY_VALID BIT(14) 794 #define RX_MSDU_EXT_DESC_INFO0_DATA_OFFSET GENMASK(26, 15) 795 #define RX_MSDU_EXT_DESC_INFO0_SRC_LINK_ID GENMASK(29, 27) 796 797 struct rx_msdu_ext_desc { 798 __le32 info0; 799 } __packed; 800 801 /* rx_msdu_ext_desc 802 * 803 * reo_destination_indication 804 * The ID of the REO exit ring where the MSDU frame shall push 805 * after (MPDU level) reordering has finished. 806 * 807 * service_code 808 * Opaque service code between PPE and Wi-Fi 809 * 810 * priority_valid 811 * 812 * data_offset 813 * The offset to Rx packet data within the buffer (including 814 * Rx DMA offset programming and L3 header padding inserted 815 * by Rx OLE). 816 * 817 * src_link_id 818 * Set to the link ID of the PMAC that received the frame 819 */ 820 821 enum hal_reo_dest_ring_buffer_type { 822 HAL_REO_DEST_RING_BUFFER_TYPE_MSDU, 823 HAL_REO_DEST_RING_BUFFER_TYPE_LINK_DESC, 824 }; 825 826 enum hal_reo_dest_ring_push_reason { 827 HAL_REO_DEST_RING_PUSH_REASON_ERR_DETECTED, 828 HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION, 829 }; 830 831 enum hal_reo_dest_ring_error_code { 832 HAL_REO_DEST_RING_ERROR_CODE_DESC_ADDR_ZERO, 833 HAL_REO_DEST_RING_ERROR_CODE_DESC_INVALID, 834 HAL_REO_DEST_RING_ERROR_CODE_AMPDU_IN_NON_BA, 835 HAL_REO_DEST_RING_ERROR_CODE_NON_BA_DUPLICATE, 836 HAL_REO_DEST_RING_ERROR_CODE_BA_DUPLICATE, 837 HAL_REO_DEST_RING_ERROR_CODE_FRAME_2K_JUMP, 838 HAL_REO_DEST_RING_ERROR_CODE_BAR_2K_JUMP, 839 HAL_REO_DEST_RING_ERROR_CODE_FRAME_OOR, 840 HAL_REO_DEST_RING_ERROR_CODE_BAR_OOR, 841 HAL_REO_DEST_RING_ERROR_CODE_NO_BA_SESSION, 842 HAL_REO_DEST_RING_ERROR_CODE_FRAME_SN_EQUALS_SSN, 843 HAL_REO_DEST_RING_ERROR_CODE_PN_CHECK_FAILED, 844 HAL_REO_DEST_RING_ERROR_CODE_2K_ERR_FLAG_SET, 845 HAL_REO_DEST_RING_ERROR_CODE_PN_ERR_FLAG_SET, 846 HAL_REO_DEST_RING_ERROR_CODE_DESC_BLOCKED, 847 HAL_REO_DEST_RING_ERROR_CODE_MAX, 848 }; 849 850 #define HAL_REO_DEST_RING_INFO0_BUFFER_TYPE BIT(0) 851 #define HAL_REO_DEST_RING_INFO0_PUSH_REASON GENMASK(2, 1) 852 #define HAL_REO_DEST_RING_INFO0_ERROR_CODE GENMASK(7, 3) 853 #define HAL_REO_DEST_RING_INFO0_MSDU_DATA_SIZE GENMASK(11, 8) 854 #define HAL_REO_DEST_RING_INFO0_SW_EXCEPTION BIT(12) 855 #define HAL_REO_DEST_RING_INFO0_SRC_LINK_ID GENMASK(15, 13) 856 #define HAL_REO_DEST_RING_INFO0_SIGNATURE GENMASK(19, 16) 857 #define HAL_REO_DEST_RING_INFO0_RING_ID GENMASK(27, 20) 858 #define HAL_REO_DEST_RING_INFO0_LOOPING_COUNT GENMASK(31, 28) 859 860 struct hal_reo_dest_ring { 861 struct ath12k_buffer_addr buf_addr_info; 862 struct rx_mpdu_desc rx_mpdu_info; 863 struct rx_msdu_desc rx_msdu_info; 864 __le32 buf_va_lo; 865 __le32 buf_va_hi; 866 __le32 info0; /* %HAL_REO_DEST_RING_INFO0_ */ 867 } __packed; 868 869 /* hal_reo_dest_ring 870 * 871 * Producer: RXDMA 872 * Consumer: REO/SW/FW 873 * 874 * buf_addr_info 875 * Details of the physical address of a buffer or MSDU 876 * link descriptor. 877 * 878 * rx_mpdu_info 879 * General information related to the MPDU that is passed 880 * on from REO entrance ring to the REO destination ring. 881 * 882 * rx_msdu_info 883 * General information related to the MSDU that is passed 884 * on from RXDMA all the way to the REO destination ring. 885 * 886 * buf_va_lo 887 * Field only valid if Reo_dest_buffer_type is set to MSDU_buf_address 888 * Lower 32 bits of the 64-bit virtual address corresponding 889 * to Buf_or_link_desc_addr_info 890 * 891 * buf_va_hi 892 * Address (upper 32 bits) of the REO queue descriptor. 893 * Upper 32 bits of the 64-bit virtual address corresponding 894 * to Buf_or_link_desc_addr_info 895 * 896 * buffer_type 897 * Indicates the type of address provided in the buf_addr_info. 898 * Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_. 899 * 900 * push_reason 901 * Reason for pushing this frame to this exit ring. Values are 902 * defined in enum %HAL_REO_DEST_RING_PUSH_REASON_. 903 * 904 * error_code 905 * Valid only when 'push_reason' is set. All error codes are 906 * defined in enum %HAL_REO_DEST_RING_ERROR_CODE_. 907 * 908 * captured_msdu_data_size 909 * The number of following REO_DESTINATION STRUCTs that have 910 * been replaced with msdu_data extracted from the msdu_buffer 911 * and copied into the ring for easy FW/SW access. 912 * 913 * sw_exception 914 * This field has the same setting as the SW_exception field 915 * in the corresponding REO_entrance_ring descriptor. 916 * When set, the REO entrance descriptor is generated by FW, 917 * and the MPDU was processed in the following way: 918 * - NO re-order function is needed. 919 * - MPDU delinking is determined by the setting of Entrance 920 * ring field: SW_excection_mpdu_delink 921 * - Destination ring selection is based on the setting of 922 * the Entrance ring field SW_exception_destination _ring_valid 923 * 924 * src_link_id 925 * Set to the link ID of the PMAC that received the frame 926 * 927 * signature 928 * Set to value 0x8 when msdu capture mode is enabled for this ring 929 * 930 * ring_id 931 * The buffer pointer ring id. 932 * 0 - Idle ring 933 * 1 - N refers to other rings. 934 * 935 * looping_count 936 * Indicates the number of times the producer of entries into 937 * this ring has looped around the ring. 938 */ 939 940 #define HAL_REO_TO_PPE_RING_INFO0_DATA_LENGTH GENMASK(15, 0) 941 #define HAL_REO_TO_PPE_RING_INFO0_DATA_OFFSET GENMASK(23, 16) 942 #define HAL_REO_TO_PPE_RING_INFO0_POOL_ID GENMASK(28, 24) 943 #define HAL_REO_TO_PPE_RING_INFO0_PREHEADER BIT(29) 944 #define HAL_REO_TO_PPE_RING_INFO0_TSO_EN BIT(30) 945 #define HAL_REO_TO_PPE_RING_INFO0_MORE BIT(31) 946 947 struct hal_reo_to_ppe_ring { 948 __le32 buffer_addr; 949 __le32 info0; /* %HAL_REO_TO_PPE_RING_INFO0_ */ 950 } __packed; 951 952 /* hal_reo_to_ppe_ring 953 * 954 * Producer: REO 955 * Consumer: PPE 956 * 957 * buf_addr_info 958 * Details of the physical address of a buffer or MSDU 959 * link descriptor. 960 * 961 * data_length 962 * Length of valid data in bytes 963 * 964 * data_offset 965 * Offset to the data from buffer pointer. Can be used to 966 * strip header in the data for tunnel termination etc. 967 * 968 * pool_id 969 * REO has global configuration register for this field. 970 * It may have several free buffer pools, each 971 * RX-Descriptor ring can fetch free buffer from specific 972 * buffer pool; pool id will indicate which pool the buffer 973 * will be released to; POOL_ID Zero returned to SW 974 * 975 * preheader 976 * Disabled: 0 (Default) 977 * Enabled: 1 978 * 979 * tso_en 980 * Disabled: 0 (Default) 981 * Enabled: 1 982 * 983 * more 984 * More Segments followed 985 */ 986 987 enum hal_reo_entr_rxdma_push_reason { 988 HAL_REO_ENTR_RING_RXDMA_PUSH_REASON_ERR_DETECTED, 989 HAL_REO_ENTR_RING_RXDMA_PUSH_REASON_ROUTING_INSTRUCTION, 990 HAL_REO_ENTR_RING_RXDMA_PUSH_REASON_RX_FLUSH, 991 }; 992 993 enum hal_reo_entr_rxdma_ecode { 994 HAL_REO_ENTR_RING_RXDMA_ECODE_OVERFLOW_ERR, 995 HAL_REO_ENTR_RING_RXDMA_ECODE_MPDU_LEN_ERR, 996 HAL_REO_ENTR_RING_RXDMA_ECODE_FCS_ERR, 997 HAL_REO_ENTR_RING_RXDMA_ECODE_DECRYPT_ERR, 998 HAL_REO_ENTR_RING_RXDMA_ECODE_TKIP_MIC_ERR, 999 HAL_REO_ENTR_RING_RXDMA_ECODE_UNECRYPTED_ERR, 1000 HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LEN_ERR, 1001 HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LIMIT_ERR, 1002 HAL_REO_ENTR_RING_RXDMA_ECODE_WIFI_PARSE_ERR, 1003 HAL_REO_ENTR_RING_RXDMA_ECODE_AMSDU_PARSE_ERR, 1004 HAL_REO_ENTR_RING_RXDMA_ECODE_SA_TIMEOUT_ERR, 1005 HAL_REO_ENTR_RING_RXDMA_ECODE_DA_TIMEOUT_ERR, 1006 HAL_REO_ENTR_RING_RXDMA_ECODE_FLOW_TIMEOUT_ERR, 1007 HAL_REO_ENTR_RING_RXDMA_ECODE_FLUSH_REQUEST_ERR, 1008 HAL_REO_ENTR_RING_RXDMA_ECODE_AMSDU_FRAG_ERR, 1009 HAL_REO_ENTR_RING_RXDMA_ECODE_MAX, 1010 }; 1011 1012 enum hal_rx_reo_dest_ring { 1013 HAL_RX_REO_DEST_RING_TCL, 1014 HAL_RX_REO_DEST_RING_SW1, 1015 HAL_RX_REO_DEST_RING_SW2, 1016 HAL_RX_REO_DEST_RING_SW3, 1017 HAL_RX_REO_DEST_RING_SW4, 1018 HAL_RX_REO_DEST_RING_RELEASE, 1019 HAL_RX_REO_DEST_RING_FW, 1020 HAL_RX_REO_DEST_RING_SW5, 1021 HAL_RX_REO_DEST_RING_SW6, 1022 HAL_RX_REO_DEST_RING_SW7, 1023 HAL_RX_REO_DEST_RING_SW8, 1024 }; 1025 1026 #define HAL_REO_ENTR_RING_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) 1027 #define HAL_REO_ENTR_RING_INFO0_MPDU_BYTE_COUNT GENMASK(21, 8) 1028 #define HAL_REO_ENTR_RING_INFO0_DEST_IND GENMASK(26, 22) 1029 #define HAL_REO_ENTR_RING_INFO0_FRAMELESS_BAR BIT(27) 1030 1031 #define HAL_REO_ENTR_RING_INFO1_RXDMA_PUSH_REASON GENMASK(1, 0) 1032 #define HAL_REO_ENTR_RING_INFO1_RXDMA_ERROR_CODE GENMASK(6, 2) 1033 #define HAL_REO_ENTR_RING_INFO1_MPDU_FRAG_NUM GENMASK(10, 7) 1034 #define HAL_REO_ENTR_RING_INFO1_SW_EXCEPTION BIT(11) 1035 #define HAL_REO_ENTR_RING_INFO1_SW_EXCEPT_MPDU_DELINK BIT(12) 1036 #define HAL_REO_ENTR_RING_INFO1_SW_EXCEPTION_RING_VLD BIT(13) 1037 #define HAL_REO_ENTR_RING_INFO1_SW_EXCEPTION_RING GENMASK(18, 14) 1038 #define HAL_REO_ENTR_RING_INFO1_MPDU_SEQ_NUM GENMASK(30, 19) 1039 1040 #define HAL_REO_ENTR_RING_INFO2_PHY_PPDU_ID GENMASK(15, 0) 1041 #define HAL_REO_ENTR_RING_INFO2_SRC_LINK_ID GENMASK(18, 16) 1042 #define HAL_REO_ENTR_RING_INFO2_RING_ID GENMASK(27, 20) 1043 #define HAL_REO_ENTR_RING_INFO2_LOOPING_COUNT GENMASK(31, 28) 1044 1045 struct hal_reo_entrance_ring { 1046 struct ath12k_buffer_addr buf_addr_info; 1047 struct rx_mpdu_desc rx_mpdu_info; 1048 __le32 queue_addr_lo; 1049 __le32 info0; /* %HAL_REO_ENTR_RING_INFO0_ */ 1050 __le32 info1; /* %HAL_REO_ENTR_RING_INFO1_ */ 1051 __le32 info2; /* %HAL_REO_DEST_RING_INFO2_ */ 1052 1053 } __packed; 1054 1055 /* hal_reo_entrance_ring 1056 * 1057 * Producer: RXDMA 1058 * Consumer: REO 1059 * 1060 * buf_addr_info 1061 * Details of the physical address of a buffer or MSDU 1062 * link descriptor. 1063 * 1064 * rx_mpdu_info 1065 * General information related to the MPDU that is passed 1066 * on from REO entrance ring to the REO destination ring. 1067 * 1068 * queue_addr_lo 1069 * Address (lower 32 bits) of the REO queue descriptor. 1070 * 1071 * queue_addr_hi 1072 * Address (upper 8 bits) of the REO queue descriptor. 1073 * 1074 * mpdu_byte_count 1075 * An approximation of the number of bytes received in this MPDU. 1076 * Used to keeps stats on the amount of data flowing 1077 * through a queue. 1078 * 1079 * reo_destination_indication 1080 * The id of the reo exit ring where the msdu frame shall push 1081 * after (MPDU level) reordering has finished. Values are defined 1082 * in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_. 1083 * 1084 * frameless_bar 1085 * Indicates that this REO entrance ring struct contains BAR info 1086 * from a multi TID BAR frame. The original multi TID BAR frame 1087 * itself contained all the REO info for the first TID, but all 1088 * the subsequent TID info and their linkage to the REO descriptors 1089 * is passed down as 'frameless' BAR info. 1090 * 1091 * The only fields valid in this descriptor when this bit is set 1092 * are queue_addr_lo, queue_addr_hi, mpdu_sequence_number, 1093 * bar_frame and peer_meta_data. 1094 * 1095 * rxdma_push_reason 1096 * Reason for pushing this frame to this exit ring. Values are 1097 * defined in enum %HAL_REO_ENTR_RING_RXDMA_PUSH_REASON_. 1098 * 1099 * rxdma_error_code 1100 * Valid only when 'push_reason' is set. All error codes are 1101 * defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_. 1102 * 1103 * mpdu_fragment_number 1104 * Field only valid when Reo_level_mpdu_frame_info. 1105 * Rx_mpdu_desc_info_details.Fragment_flag is set. 1106 * 1107 * sw_exception 1108 * When not set, REO is performing all its default MPDU processing 1109 * operations, 1110 * When set, this REO entrance descriptor is generated by FW, and 1111 * should be processed as an exception. This implies: 1112 * NO re-order function is needed. 1113 * MPDU delinking is determined by the setting of field 1114 * SW_excection_mpdu_delink 1115 * 1116 * sw_exception_mpdu_delink 1117 * Field only valid when SW_exception is set. 1118 * 1'b0: REO should NOT delink the MPDU, and thus pass this 1119 * MPDU on to the destination ring as is. This implies that 1120 * in the REO_DESTINATION_RING struct field 1121 * Buf_or_link_desc_addr_info should point to an MSDU link 1122 * descriptor 1123 * 1'b1: REO should perform the normal MPDU delink into MSDU operations. 1124 * 1125 * sw_exception_dest_ring 1126 * Field only valid when fields SW_exception and SW 1127 * exception_destination_ring_valid are set. values are defined 1128 * in %HAL_RX_REO_DEST_RING_. 1129 * 1130 * mpdu_seq_number 1131 * The field can have two different meanings based on the setting 1132 * of sub-field Reo level mpdu frame info. 1133 * Rx_mpdu_desc_info_details. BAR_frame 1134 * 'BAR_frame' is NOT set: 1135 * The MPDU sequence number of the received frame. 1136 * 'BAR_frame' is set. 1137 * The MPDU Start sequence number from the BAR frame 1138 * 1139 * phy_ppdu_id 1140 * A PPDU counter value that PHY increments for every PPDU received 1141 * 1142 * src_link_id 1143 * Set to the link ID of the PMAC that received the frame 1144 * 1145 * ring_id 1146 * The buffer pointer ring id. 1147 * 0 - Idle ring 1148 * 1 - N refers to other rings. 1149 * 1150 * looping_count 1151 * Indicates the number of times the producer of entries into 1152 * this ring has looped around the ring. 1153 */ 1154 1155 #define HAL_REO_CMD_HDR_INFO0_CMD_NUMBER GENMASK(15, 0) 1156 #define HAL_REO_CMD_HDR_INFO0_STATUS_REQUIRED BIT(16) 1157 1158 struct hal_reo_cmd_hdr { 1159 __le32 info0; 1160 } __packed; 1161 1162 #define HAL_REO_GET_QUEUE_STATS_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) 1163 #define HAL_REO_GET_QUEUE_STATS_INFO0_CLEAR_STATS BIT(8) 1164 1165 struct hal_reo_get_queue_stats { 1166 struct hal_reo_cmd_hdr cmd; 1167 __le32 queue_addr_lo; 1168 __le32 info0; 1169 __le32 rsvd0[6]; 1170 __le32 tlv64_pad; 1171 } __packed; 1172 1173 /* hal_reo_get_queue_stats 1174 * Producer: SW 1175 * Consumer: REO 1176 * 1177 * cmd 1178 * Details for command execution tracking purposes. 1179 * 1180 * queue_addr_lo 1181 * Address (lower 32 bits) of the REO queue descriptor. 1182 * 1183 * queue_addr_hi 1184 * Address (upper 8 bits) of the REO queue descriptor. 1185 * 1186 * clear_stats 1187 * Clear stats settings. When set, Clear the stats after 1188 * generating the status. 1189 * 1190 * Following stats will be cleared. 1191 * Timeout_count 1192 * Forward_due_to_bar_count 1193 * Duplicate_count 1194 * Frames_in_order_count 1195 * BAR_received_count 1196 * MPDU_Frames_processed_count 1197 * MSDU_Frames_processed_count 1198 * Total_processed_byte_count 1199 * Late_receive_MPDU_count 1200 * window_jump_2k 1201 * Hole_count 1202 */ 1203 1204 #define HAL_REO_FLUSH_QUEUE_INFO0_DESC_ADDR_HI GENMASK(7, 0) 1205 #define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_DESC_ADDR BIT(8) 1206 #define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_RESRC_IDX GENMASK(10, 9) 1207 1208 struct hal_reo_flush_queue { 1209 struct hal_reo_cmd_hdr cmd; 1210 __le32 desc_addr_lo; 1211 __le32 info0; 1212 __le32 rsvd0[6]; 1213 } __packed; 1214 1215 #define HAL_REO_FLUSH_CACHE_INFO0_CACHE_ADDR_HI GENMASK(7, 0) 1216 #define HAL_REO_FLUSH_CACHE_INFO0_FWD_ALL_MPDUS BIT(8) 1217 #define HAL_REO_FLUSH_CACHE_INFO0_RELEASE_BLOCK_IDX BIT(9) 1218 #define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_RESRC_IDX GENMASK(11, 10) 1219 #define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_WO_INVALIDATE BIT(12) 1220 #define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_CACHE_USAGE BIT(13) 1221 #define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_ALL BIT(14) 1222 1223 struct hal_reo_flush_cache { 1224 struct hal_reo_cmd_hdr cmd; 1225 __le32 cache_addr_lo; 1226 __le32 info0; 1227 __le32 rsvd0[6]; 1228 } __packed; 1229 1230 #define HAL_TCL_DATA_CMD_INFO0_CMD_TYPE BIT(0) 1231 #define HAL_TCL_DATA_CMD_INFO0_DESC_TYPE BIT(1) 1232 #define HAL_TCL_DATA_CMD_INFO0_BANK_ID GENMASK(7, 2) 1233 #define HAL_TCL_DATA_CMD_INFO0_TX_NOTIFY_FRAME GENMASK(10, 8) 1234 #define HAL_TCL_DATA_CMD_INFO0_HDR_LEN_READ_SEL BIT(11) 1235 #define HAL_TCL_DATA_CMD_INFO0_BUF_TIMESTAMP GENMASK(30, 12) 1236 #define HAL_TCL_DATA_CMD_INFO0_BUF_TIMESTAMP_VLD BIT(31) 1237 1238 #define HAL_TCL_DATA_CMD_INFO1_CMD_NUM GENMASK(31, 16) 1239 1240 #define HAL_TCL_DATA_CMD_INFO2_DATA_LEN GENMASK(15, 0) 1241 #define HAL_TCL_DATA_CMD_INFO2_IP4_CKSUM_EN BIT(16) 1242 #define HAL_TCL_DATA_CMD_INFO2_UDP4_CKSUM_EN BIT(17) 1243 #define HAL_TCL_DATA_CMD_INFO2_UDP6_CKSUM_EN BIT(18) 1244 #define HAL_TCL_DATA_CMD_INFO2_TCP4_CKSUM_EN BIT(19) 1245 #define HAL_TCL_DATA_CMD_INFO2_TCP6_CKSUM_EN BIT(20) 1246 #define HAL_TCL_DATA_CMD_INFO2_TO_FW BIT(21) 1247 #define HAL_TCL_DATA_CMD_INFO2_PKT_OFFSET GENMASK(31, 23) 1248 1249 #define HAL_TCL_DATA_CMD_INFO3_TID_OVERWRITE BIT(0) 1250 #define HAL_TCL_DATA_CMD_INFO3_FLOW_OVERRIDE_EN BIT(1) 1251 #define HAL_TCL_DATA_CMD_INFO3_CLASSIFY_INFO_SEL GENMASK(3, 2) 1252 #define HAL_TCL_DATA_CMD_INFO3_TID GENMASK(7, 4) 1253 #define HAL_TCL_DATA_CMD_INFO3_FLOW_OVERRIDE BIT(8) 1254 #define HAL_TCL_DATA_CMD_INFO3_PMAC_ID GENMASK(10, 9) 1255 #define HAL_TCL_DATA_CMD_INFO3_MSDU_COLOR GENMASK(12, 11) 1256 #define HAL_TCL_DATA_CMD_INFO3_VDEV_ID GENMASK(31, 24) 1257 1258 #define HAL_TCL_DATA_CMD_INFO4_SEARCH_INDEX GENMASK(19, 0) 1259 #define HAL_TCL_DATA_CMD_INFO4_CACHE_SET_NUM GENMASK(23, 20) 1260 #define HAL_TCL_DATA_CMD_INFO4_IDX_LOOKUP_OVERRIDE BIT(24) 1261 1262 #define HAL_TCL_DATA_CMD_INFO5_RING_ID GENMASK(27, 20) 1263 #define HAL_TCL_DATA_CMD_INFO5_LOOPING_COUNT GENMASK(31, 28) 1264 1265 enum hal_encrypt_type { 1266 HAL_ENCRYPT_TYPE_WEP_40, 1267 HAL_ENCRYPT_TYPE_WEP_104, 1268 HAL_ENCRYPT_TYPE_TKIP_NO_MIC, 1269 HAL_ENCRYPT_TYPE_WEP_128, 1270 HAL_ENCRYPT_TYPE_TKIP_MIC, 1271 HAL_ENCRYPT_TYPE_WAPI, 1272 HAL_ENCRYPT_TYPE_CCMP_128, 1273 HAL_ENCRYPT_TYPE_OPEN, 1274 HAL_ENCRYPT_TYPE_CCMP_256, 1275 HAL_ENCRYPT_TYPE_GCMP_128, 1276 HAL_ENCRYPT_TYPE_AES_GCMP_256, 1277 HAL_ENCRYPT_TYPE_WAPI_GCM_SM4, 1278 }; 1279 1280 enum hal_tcl_encap_type { 1281 HAL_TCL_ENCAP_TYPE_RAW, 1282 HAL_TCL_ENCAP_TYPE_NATIVE_WIFI, 1283 HAL_TCL_ENCAP_TYPE_ETHERNET, 1284 HAL_TCL_ENCAP_TYPE_802_3 = 3, 1285 }; 1286 1287 enum hal_tcl_desc_type { 1288 HAL_TCL_DESC_TYPE_BUFFER, 1289 HAL_TCL_DESC_TYPE_EXT_DESC, 1290 }; 1291 1292 enum hal_wbm_htt_tx_comp_status { 1293 HAL_WBM_REL_HTT_TX_COMP_STATUS_OK, 1294 HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP, 1295 HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL, 1296 HAL_WBM_REL_HTT_TX_COMP_STATUS_REINJ, 1297 HAL_WBM_REL_HTT_TX_COMP_STATUS_INSPECT, 1298 HAL_WBM_REL_HTT_TX_COMP_STATUS_MEC_NOTIFY, 1299 HAL_WBM_REL_HTT_TX_COMP_STATUS_VDEVID_MISMATCH, 1300 HAL_WBM_REL_HTT_TX_COMP_STATUS_MAX, 1301 }; 1302 1303 struct hal_tcl_data_cmd { 1304 struct ath12k_buffer_addr buf_addr_info; 1305 __le32 info0; 1306 __le32 info1; 1307 __le32 info2; 1308 __le32 info3; 1309 __le32 info4; 1310 __le32 info5; 1311 } __packed; 1312 1313 /* hal_tcl_data_cmd 1314 * 1315 * buf_addr_info 1316 * Details of the physical address of a buffer or MSDU 1317 * link descriptor. 1318 * 1319 * tcl_cmd_type 1320 * used to select the type of TCL Command descriptor 1321 * 1322 * desc_type 1323 * Indicates the type of address provided in the buf_addr_info. 1324 * Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_. 1325 * 1326 * bank_id 1327 * used to select one of the TCL register banks for fields removed 1328 * from 'TCL_DATA_CMD' that do not change often within one virtual 1329 * device or a set of virtual devices: 1330 * 1331 * tx_notify_frame 1332 * TCL copies this value to 'TQM_ENTRANCE_RING' field FW_tx_notify_frame. 1333 * 1334 * hdr_length_read_sel 1335 * used to select the per 'encap_type' register set for MSDU header 1336 * read length 1337 * 1338 * buffer_timestamp 1339 * buffer_timestamp_valid 1340 * Frame system entrance timestamp. It shall be filled by first 1341 * module (SW, TCL or TQM) that sees the frames first. 1342 * 1343 * cmd_num 1344 * This number can be used to match against status. 1345 * 1346 * data_length 1347 * MSDU length in case of direct descriptor. Length of link 1348 * extension descriptor in case of Link extension descriptor. 1349 * 1350 * *_checksum_en 1351 * Enable checksum replacement for ipv4, udp_over_ipv4, ipv6, 1352 * udp_over_ipv6, tcp_over_ipv4 and tcp_over_ipv6. 1353 * 1354 * to_fw 1355 * Forward packet to FW along with classification result. The 1356 * packet will not be forward to TQM when this bit is set. 1357 * 1'b0: Use classification result to forward the packet. 1358 * 1'b1: Override classification result & forward packet only to fw 1359 * 1360 * packet_offset 1361 * Packet offset from Metadata in case of direct buffer descriptor. 1362 * 1363 * hlos_tid_overwrite 1364 * 1365 * When set, TCL shall ignore the IP DSCP and VLAN PCP 1366 * fields and use HLOS_TID as the final TID. Otherwise TCL 1367 * shall consider the DSCP and PCP fields as well as HLOS_TID 1368 * and choose a final TID based on the configured priority 1369 * 1370 * flow_override_enable 1371 * TCL uses this to select the flow pointer from the peer table, 1372 * which can be overridden by SW for pre-encrypted raw WiFi packets 1373 * that cannot be parsed for UDP or for other MLO 1374 * 0 - FP_PARSE_IP: Use the flow-pointer based on parsing the IPv4 1375 * or IPv6 header. 1376 * 1 - FP_USE_OVERRIDE: Use the who_classify_info_sel and 1377 * flow_override fields to select the flow-pointer 1378 * 1379 * who_classify_info_sel 1380 * Field only valid when flow_override_enable is set to FP_USE_OVERRIDE. 1381 * This field is used to select one of the 'WHO_CLASSIFY_INFO's in the 1382 * peer table in case more than 2 flows are mapped to a single TID. 1383 * 0: To choose Flow 0 and 1 of any TID use this value. 1384 * 1: To choose Flow 2 and 3 of any TID use this value. 1385 * 2: To choose Flow 4 and 5 of any TID use this value. 1386 * 3: To choose Flow 6 and 7 of any TID use this value. 1387 * 1388 * If who_classify_info sel is not in sync with the num_tx_classify_info 1389 * field from address search, then TCL will set 'who_classify_info_sel' 1390 * to 0 use flows 0 and 1. 1391 * 1392 * hlos_tid 1393 * HLOS MSDU priority 1394 * Field is used when HLOS_TID_overwrite is set. 1395 * 1396 * flow_override 1397 * Field only valid when flow_override_enable is set to FP_USE_OVERRIDE 1398 * TCL uses this to select the flow pointer from the peer table, 1399 * which can be overridden by SW for pre-encrypted raw WiFi packets 1400 * that cannot be parsed for UDP or for other MLO 1401 * 0 - FP_USE_NON_UDP: Use the non-UDP flow pointer (flow 0) 1402 * 1 - FP_USE_UDP: Use the UDP flow pointer (flow 1) 1403 * 1404 * pmac_id 1405 * TCL uses this PMAC_ID in address search, i.e, while 1406 * finding matching entry for the packet in AST corresponding 1407 * to given PMAC_ID 1408 * 1409 * If PMAC ID is all 1s (=> value 3), it indicates wildcard 1410 * match for any PMAC 1411 * 1412 * vdev_id 1413 * Virtual device ID to check against the address search entry to 1414 * avoid security issues from transmitting packets from an incorrect 1415 * virtual device 1416 * 1417 * search_index 1418 * The index that will be used for index based address or 1419 * flow search. The field is valid when 'search_type' is 1 or 2. 1420 * 1421 * cache_set_num 1422 * 1423 * Cache set number that should be used to cache the index 1424 * based search results, for address and flow search. This 1425 * value should be equal to LSB four bits of the hash value of 1426 * match data, in case of search index points to an entry which 1427 * may be used in content based search also. The value can be 1428 * anything when the entry pointed by search index will not be 1429 * used for content based search. 1430 * 1431 * index_loop_override 1432 * When set, address search and packet routing is forced to use 1433 * 'search_index' instead of following the register configuration 1434 * selected by Bank_id. 1435 * 1436 * ring_id 1437 * The buffer pointer ring ID. 1438 * 0 refers to the IDLE ring 1439 * 1 - N refers to other rings 1440 * 1441 * looping_count 1442 * 1443 * A count value that indicates the number of times the 1444 * producer of entries into the Ring has looped around the 1445 * ring. 1446 * 1447 * At initialization time, this value is set to 0. On the 1448 * first loop, this value is set to 1. After the max value is 1449 * reached allowed by the number of bits for this field, the 1450 * count value continues with 0 again. 1451 * 1452 * In case SW is the consumer of the ring entries, it can 1453 * use this field to figure out up to where the producer of 1454 * entries has created new entries. This eliminates the need to 1455 * check where the head pointer' of the ring is located once 1456 * the SW starts processing an interrupt indicating that new 1457 * entries have been put into this ring... 1458 * 1459 * Also note that SW if it wants only needs to look at the 1460 * LSB bit of this count value. 1461 */ 1462 1463 #define HAL_TCL_DESC_LEN sizeof(struct hal_tcl_data_cmd) 1464 1465 #define HAL_TX_MSDU_EXT_INFO0_BUF_PTR_LO GENMASK(31, 0) 1466 1467 #define HAL_TX_MSDU_EXT_INFO1_BUF_PTR_HI GENMASK(7, 0) 1468 #define HAL_TX_MSDU_EXT_INFO1_EXTN_OVERRIDE BIT(8) 1469 #define HAL_TX_MSDU_EXT_INFO1_ENCAP_TYPE GENMASK(10, 9) 1470 #define HAL_TX_MSDU_EXT_INFO1_ENCRYPT_TYPE GENMASK(14, 11) 1471 #define HAL_TX_MSDU_EXT_INFO1_BUF_LEN GENMASK(31, 16) 1472 1473 struct hal_tx_msdu_ext_desc { 1474 __le32 rsvd0[6]; 1475 __le32 info0; 1476 __le32 info1; 1477 __le32 rsvd1[10]; 1478 }; 1479 1480 struct hal_tcl_gse_cmd { 1481 __le32 ctrl_buf_addr_lo; 1482 __le32 info0; 1483 __le32 meta_data[2]; 1484 __le32 rsvd0[2]; 1485 __le32 info1; 1486 } __packed; 1487 1488 /* hal_tcl_gse_cmd 1489 * 1490 * ctrl_buf_addr_lo, ctrl_buf_addr_hi 1491 * Address of a control buffer containing additional info needed 1492 * for this command execution. 1493 * 1494 * meta_data 1495 * Meta data to be returned in the status descriptor 1496 */ 1497 1498 enum hal_tcl_cache_op_res { 1499 HAL_TCL_CACHE_OP_RES_DONE, 1500 HAL_TCL_CACHE_OP_RES_NOT_FOUND, 1501 HAL_TCL_CACHE_OP_RES_TIMEOUT, 1502 }; 1503 1504 struct hal_tcl_status_ring { 1505 __le32 info0; 1506 __le32 msdu_byte_count; 1507 __le32 msdu_timestamp; 1508 __le32 meta_data[2]; 1509 __le32 info1; 1510 __le32 rsvd0; 1511 __le32 info2; 1512 } __packed; 1513 1514 /* hal_tcl_status_ring 1515 * 1516 * msdu_cnt 1517 * msdu_byte_count 1518 * MSDU count of Entry and MSDU byte count for entry 1. 1519 * 1520 */ 1521 1522 #define HAL_CE_SRC_DESC_ADDR_INFO_ADDR_HI GENMASK(7, 0) 1523 #define HAL_CE_SRC_DESC_ADDR_INFO_HASH_EN BIT(8) 1524 #define HAL_CE_SRC_DESC_ADDR_INFO_BYTE_SWAP BIT(9) 1525 #define HAL_CE_SRC_DESC_ADDR_INFO_DEST_SWAP BIT(10) 1526 #define HAL_CE_SRC_DESC_ADDR_INFO_GATHER BIT(11) 1527 #define HAL_CE_SRC_DESC_ADDR_INFO_LEN GENMASK(31, 16) 1528 1529 #define HAL_CE_SRC_DESC_META_INFO_DATA GENMASK(15, 0) 1530 1531 #define HAL_CE_SRC_DESC_FLAGS_RING_ID GENMASK(27, 20) 1532 #define HAL_CE_SRC_DESC_FLAGS_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT 1533 1534 struct hal_ce_srng_src_desc { 1535 __le32 buffer_addr_low; 1536 __le32 buffer_addr_info; /* %HAL_CE_SRC_DESC_ADDR_INFO_ */ 1537 __le32 meta_info; /* %HAL_CE_SRC_DESC_META_INFO_ */ 1538 __le32 flags; /* %HAL_CE_SRC_DESC_FLAGS_ */ 1539 } __packed; 1540 1541 /* hal_ce_srng_src_desc 1542 * 1543 * buffer_addr_lo 1544 * LSB 32 bits of the 40 Bit Pointer to the source buffer 1545 * 1546 * buffer_addr_hi 1547 * MSB 8 bits of the 40 Bit Pointer to the source buffer 1548 * 1549 * toeplitz_en 1550 * Enable generation of 32-bit Toeplitz-LFSR hash for 1551 * data transfer. In case of gather field in first source 1552 * ring entry of the gather copy cycle in taken into account. 1553 * 1554 * src_swap 1555 * Treats source memory organization as big-endian. For 1556 * each dword read (4 bytes), the byte 0 is swapped with byte 3 1557 * and byte 1 is swapped with byte 2. 1558 * In case of gather field in first source ring entry of 1559 * the gather copy cycle in taken into account. 1560 * 1561 * dest_swap 1562 * Treats destination memory organization as big-endian. 1563 * For each dword write (4 bytes), the byte 0 is swapped with 1564 * byte 3 and byte 1 is swapped with byte 2. 1565 * In case of gather field in first source ring entry of 1566 * the gather copy cycle in taken into account. 1567 * 1568 * gather 1569 * Enables gather of multiple copy engine source 1570 * descriptors to one destination. 1571 * 1572 * ce_res_0 1573 * Reserved 1574 * 1575 * 1576 * length 1577 * Length of the buffer in units of octets of the current 1578 * descriptor 1579 * 1580 * fw_metadata 1581 * Meta data used by FW. 1582 * In case of gather field in first source ring entry of 1583 * the gather copy cycle in taken into account. 1584 * 1585 * ce_res_1 1586 * Reserved 1587 * 1588 * ce_res_2 1589 * Reserved 1590 * 1591 * ring_id 1592 * The buffer pointer ring ID. 1593 * 0 refers to the IDLE ring 1594 * 1 - N refers to other rings 1595 * Helps with debugging when dumping ring contents. 1596 * 1597 * looping_count 1598 * A count value that indicates the number of times the 1599 * producer of entries into the Ring has looped around the 1600 * ring. 1601 * 1602 * At initialization time, this value is set to 0. On the 1603 * first loop, this value is set to 1. After the max value is 1604 * reached allowed by the number of bits for this field, the 1605 * count value continues with 0 again. 1606 * 1607 * In case SW is the consumer of the ring entries, it can 1608 * use this field to figure out up to where the producer of 1609 * entries has created new entries. This eliminates the need to 1610 * check where the head pointer' of the ring is located once 1611 * the SW starts processing an interrupt indicating that new 1612 * entries have been put into this ring... 1613 * 1614 * Also note that SW if it wants only needs to look at the 1615 * LSB bit of this count value. 1616 */ 1617 1618 #define HAL_CE_DEST_DESC_ADDR_INFO_ADDR_HI GENMASK(7, 0) 1619 #define HAL_CE_DEST_DESC_ADDR_INFO_RING_ID GENMASK(27, 20) 1620 #define HAL_CE_DEST_DESC_ADDR_INFO_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT 1621 1622 struct hal_ce_srng_dest_desc { 1623 __le32 buffer_addr_low; 1624 __le32 buffer_addr_info; /* %HAL_CE_DEST_DESC_ADDR_INFO_ */ 1625 } __packed; 1626 1627 /* hal_ce_srng_dest_desc 1628 * 1629 * dst_buffer_low 1630 * LSB 32 bits of the 40 Bit Pointer to the Destination 1631 * buffer 1632 * 1633 * dst_buffer_high 1634 * MSB 8 bits of the 40 Bit Pointer to the Destination 1635 * buffer 1636 * 1637 * ce_res_4 1638 * Reserved 1639 * 1640 * ring_id 1641 * The buffer pointer ring ID. 1642 * 0 refers to the IDLE ring 1643 * 1 - N refers to other rings 1644 * Helps with debugging when dumping ring contents. 1645 * 1646 * looping_count 1647 * A count value that indicates the number of times the 1648 * producer of entries into the Ring has looped around the 1649 * ring. 1650 * 1651 * At initialization time, this value is set to 0. On the 1652 * first loop, this value is set to 1. After the max value is 1653 * reached allowed by the number of bits for this field, the 1654 * count value continues with 0 again. 1655 * 1656 * In case SW is the consumer of the ring entries, it can 1657 * use this field to figure out up to where the producer of 1658 * entries has created new entries. This eliminates the need to 1659 * check where the head pointer' of the ring is located once 1660 * the SW starts processing an interrupt indicating that new 1661 * entries have been put into this ring... 1662 * 1663 * Also note that SW if it wants only needs to look at the 1664 * LSB bit of this count value. 1665 */ 1666 1667 #define HAL_CE_DST_STATUS_DESC_FLAGS_HASH_EN BIT(8) 1668 #define HAL_CE_DST_STATUS_DESC_FLAGS_BYTE_SWAP BIT(9) 1669 #define HAL_CE_DST_STATUS_DESC_FLAGS_DEST_SWAP BIT(10) 1670 #define HAL_CE_DST_STATUS_DESC_FLAGS_GATHER BIT(11) 1671 #define HAL_CE_DST_STATUS_DESC_FLAGS_LEN GENMASK(31, 16) 1672 1673 #define HAL_CE_DST_STATUS_DESC_META_INFO_DATA GENMASK(15, 0) 1674 #define HAL_CE_DST_STATUS_DESC_META_INFO_RING_ID GENMASK(27, 20) 1675 #define HAL_CE_DST_STATUS_DESC_META_INFO_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT 1676 1677 struct hal_ce_srng_dst_status_desc { 1678 __le32 flags; /* %HAL_CE_DST_STATUS_DESC_FLAGS_ */ 1679 __le32 toeplitz_hash0; 1680 __le32 toeplitz_hash1; 1681 __le32 meta_info; /* HAL_CE_DST_STATUS_DESC_META_INFO_ */ 1682 } __packed; 1683 1684 /* hal_ce_srng_dst_status_desc 1685 * 1686 * ce_res_5 1687 * Reserved 1688 * 1689 * toeplitz_en 1690 * 1691 * src_swap 1692 * Source memory buffer swapped 1693 * 1694 * dest_swap 1695 * Destination memory buffer swapped 1696 * 1697 * gather 1698 * Gather of multiple copy engine source descriptors to one 1699 * destination enabled 1700 * 1701 * ce_res_6 1702 * Reserved 1703 * 1704 * length 1705 * Sum of all the Lengths of the source descriptor in the 1706 * gather chain 1707 * 1708 * toeplitz_hash_0 1709 * 32 LS bits of 64 bit Toeplitz LFSR hash result 1710 * 1711 * toeplitz_hash_1 1712 * 32 MS bits of 64 bit Toeplitz LFSR hash result 1713 * 1714 * fw_metadata 1715 * Meta data used by FW 1716 * In case of gather field in first source ring entry of 1717 * the gather copy cycle in taken into account. 1718 * 1719 * ce_res_7 1720 * Reserved 1721 * 1722 * ring_id 1723 * The buffer pointer ring ID. 1724 * 0 refers to the IDLE ring 1725 * 1 - N refers to other rings 1726 * Helps with debugging when dumping ring contents. 1727 * 1728 * looping_count 1729 * A count value that indicates the number of times the 1730 * producer of entries into the Ring has looped around the 1731 * ring. 1732 * 1733 * At initialization time, this value is set to 0. On the 1734 * first loop, this value is set to 1. After the max value is 1735 * reached allowed by the number of bits for this field, the 1736 * count value continues with 0 again. 1737 * 1738 * In case SW is the consumer of the ring entries, it can 1739 * use this field to figure out up to where the producer of 1740 * entries has created new entries. This eliminates the need to 1741 * check where the head pointer' of the ring is located once 1742 * the SW starts processing an interrupt indicating that new 1743 * entries have been put into this ring... 1744 * 1745 * Also note that SW if it wants only needs to look at the 1746 * LSB bit of this count value. 1747 */ 1748 1749 #define HAL_TX_RATE_STATS_INFO0_VALID BIT(0) 1750 #define HAL_TX_RATE_STATS_INFO0_BW GENMASK(3, 1) 1751 #define HAL_TX_RATE_STATS_INFO0_PKT_TYPE GENMASK(7, 4) 1752 #define HAL_TX_RATE_STATS_INFO0_STBC BIT(8) 1753 #define HAL_TX_RATE_STATS_INFO0_LDPC BIT(9) 1754 #define HAL_TX_RATE_STATS_INFO0_SGI GENMASK(11, 10) 1755 #define HAL_TX_RATE_STATS_INFO0_MCS GENMASK(15, 12) 1756 #define HAL_TX_RATE_STATS_INFO0_OFDMA_TX BIT(16) 1757 #define HAL_TX_RATE_STATS_INFO0_TONES_IN_RU GENMASK(28, 17) 1758 1759 enum hal_tx_rate_stats_bw { 1760 HAL_TX_RATE_STATS_BW_20, 1761 HAL_TX_RATE_STATS_BW_40, 1762 HAL_TX_RATE_STATS_BW_80, 1763 HAL_TX_RATE_STATS_BW_160, 1764 }; 1765 1766 enum hal_tx_rate_stats_pkt_type { 1767 HAL_TX_RATE_STATS_PKT_TYPE_11A, 1768 HAL_TX_RATE_STATS_PKT_TYPE_11B, 1769 HAL_TX_RATE_STATS_PKT_TYPE_11N, 1770 HAL_TX_RATE_STATS_PKT_TYPE_11AC, 1771 HAL_TX_RATE_STATS_PKT_TYPE_11AX, 1772 HAL_TX_RATE_STATS_PKT_TYPE_11BA, 1773 HAL_TX_RATE_STATS_PKT_TYPE_11BE, 1774 }; 1775 1776 enum hal_tx_rate_stats_sgi { 1777 HAL_TX_RATE_STATS_SGI_08US, 1778 HAL_TX_RATE_STATS_SGI_04US, 1779 HAL_TX_RATE_STATS_SGI_16US, 1780 HAL_TX_RATE_STATS_SGI_32US, 1781 }; 1782 1783 struct hal_tx_rate_stats { 1784 __le32 info0; 1785 __le32 tsf; 1786 } __packed; 1787 1788 struct hal_wbm_link_desc { 1789 struct ath12k_buffer_addr buf_addr_info; 1790 } __packed; 1791 1792 /* hal_wbm_link_desc 1793 * 1794 * Producer: WBM 1795 * Consumer: WBM 1796 * 1797 * buf_addr_info 1798 * Details of the physical address of a buffer or MSDU 1799 * link descriptor. 1800 */ 1801 1802 enum hal_wbm_rel_src_module { 1803 HAL_WBM_REL_SRC_MODULE_TQM, 1804 HAL_WBM_REL_SRC_MODULE_RXDMA, 1805 HAL_WBM_REL_SRC_MODULE_REO, 1806 HAL_WBM_REL_SRC_MODULE_FW, 1807 HAL_WBM_REL_SRC_MODULE_SW, 1808 }; 1809 1810 enum hal_wbm_rel_desc_type { 1811 HAL_WBM_REL_DESC_TYPE_REL_MSDU, 1812 HAL_WBM_REL_DESC_TYPE_MSDU_LINK, 1813 HAL_WBM_REL_DESC_TYPE_MPDU_LINK, 1814 HAL_WBM_REL_DESC_TYPE_MSDU_EXT, 1815 HAL_WBM_REL_DESC_TYPE_QUEUE_EXT, 1816 }; 1817 1818 /* hal_wbm_rel_desc_type 1819 * 1820 * msdu_buffer 1821 * The address points to an MSDU buffer 1822 * 1823 * msdu_link_descriptor 1824 * The address points to an Tx MSDU link descriptor 1825 * 1826 * mpdu_link_descriptor 1827 * The address points to an MPDU link descriptor 1828 * 1829 * msdu_ext_descriptor 1830 * The address points to an MSDU extension descriptor 1831 * 1832 * queue_ext_descriptor 1833 * The address points to an TQM queue extension descriptor. WBM should 1834 * treat this is the same way as a link descriptor. 1835 */ 1836 1837 enum hal_wbm_rel_bm_act { 1838 HAL_WBM_REL_BM_ACT_PUT_IN_IDLE, 1839 HAL_WBM_REL_BM_ACT_REL_MSDU, 1840 }; 1841 1842 /* hal_wbm_rel_bm_act 1843 * 1844 * put_in_idle_list 1845 * Put the buffer or descriptor back in the idle list. In case of MSDU or 1846 * MDPU link descriptor, BM does not need to check to release any 1847 * individual MSDU buffers. 1848 * 1849 * release_msdu_list 1850 * This BM action can only be used in combination with desc_type being 1851 * msdu_link_descriptor. Field first_msdu_index points out which MSDU 1852 * pointer in the MSDU link descriptor is the first of an MPDU that is 1853 * released. BM shall release all the MSDU buffers linked to this first 1854 * MSDU buffer pointer. All related MSDU buffer pointer entries shall be 1855 * set to value 0, which represents the 'NULL' pointer. When all MSDU 1856 * buffer pointers in the MSDU link descriptor are 'NULL', the MSDU link 1857 * descriptor itself shall also be released. 1858 */ 1859 #define HAL_WBM_COMPL_RX_INFO0_REL_SRC_MODULE GENMASK(2, 0) 1860 #define HAL_WBM_COMPL_RX_INFO0_BM_ACTION GENMASK(5, 3) 1861 #define HAL_WBM_COMPL_RX_INFO0_DESC_TYPE GENMASK(8, 6) 1862 #define HAL_WBM_COMPL_RX_INFO0_RBM GENMASK(12, 9) 1863 #define HAL_WBM_COMPL_RX_INFO0_RXDMA_PUSH_REASON GENMASK(18, 17) 1864 #define HAL_WBM_COMPL_RX_INFO0_RXDMA_ERROR_CODE GENMASK(23, 19) 1865 #define HAL_WBM_COMPL_RX_INFO0_REO_PUSH_REASON GENMASK(25, 24) 1866 #define HAL_WBM_COMPL_RX_INFO0_REO_ERROR_CODE GENMASK(30, 26) 1867 #define HAL_WBM_COMPL_RX_INFO0_WBM_INTERNAL_ERROR BIT(31) 1868 1869 #define HAL_WBM_COMPL_RX_INFO1_PHY_ADDR_HI GENMASK(7, 0) 1870 #define HAL_WBM_COMPL_RX_INFO1_SW_COOKIE GENMASK(27, 8) 1871 #define HAL_WBM_COMPL_RX_INFO1_LOOPING_COUNT GENMASK(31, 28) 1872 1873 struct hal_wbm_completion_ring_rx { 1874 __le32 addr_lo; 1875 __le32 addr_hi; 1876 __le32 info0; 1877 struct rx_mpdu_desc rx_mpdu_info; 1878 struct rx_msdu_desc rx_msdu_info; 1879 __le32 phy_addr_lo; 1880 __le32 info1; 1881 } __packed; 1882 1883 #define HAL_WBM_COMPL_TX_INFO0_REL_SRC_MODULE GENMASK(2, 0) 1884 #define HAL_WBM_COMPL_TX_INFO0_DESC_TYPE GENMASK(8, 6) 1885 #define HAL_WBM_COMPL_TX_INFO0_RBM GENMASK(12, 9) 1886 #define HAL_WBM_COMPL_TX_INFO0_TQM_RELEASE_REASON GENMASK(16, 13) 1887 #define HAL_WBM_COMPL_TX_INFO0_RBM_OVERRIDE_VLD BIT(17) 1888 #define HAL_WBM_COMPL_TX_INFO0_SW_COOKIE_LO GENMASK(29, 18) 1889 #define HAL_WBM_COMPL_TX_INFO0_CC_DONE BIT(30) 1890 #define HAL_WBM_COMPL_TX_INFO0_WBM_INTERNAL_ERROR BIT(31) 1891 1892 #define HAL_WBM_COMPL_TX_INFO1_TQM_STATUS_NUMBER GENMASK(23, 0) 1893 #define HAL_WBM_COMPL_TX_INFO1_TRANSMIT_COUNT GENMASK(30, 24) 1894 #define HAL_WBM_COMPL_TX_INFO1_SW_REL_DETAILS_VALID BIT(31) 1895 1896 #define HAL_WBM_COMPL_TX_INFO2_ACK_FRAME_RSSI GENMASK(7, 0) 1897 #define HAL_WBM_COMPL_TX_INFO2_FIRST_MSDU BIT(8) 1898 #define HAL_WBM_COMPL_TX_INFO2_LAST_MSDU BIT(9) 1899 #define HAL_WBM_COMPL_TX_INFO2_FW_TX_NOTIF_FRAME GENMASK(12, 10) 1900 #define HAL_WBM_COMPL_TX_INFO2_BUFFER_TIMESTAMP GENMASK(31, 13) 1901 1902 #define HAL_WBM_COMPL_TX_INFO3_PEER_ID GENMASK(15, 0) 1903 #define HAL_WBM_COMPL_TX_INFO3_TID GENMASK(19, 16) 1904 #define HAL_WBM_COMPL_TX_INFO3_SW_COOKIE_HI GENMASK(27, 20) 1905 #define HAL_WBM_COMPL_TX_INFO3_LOOPING_COUNT GENMASK(31, 28) 1906 1907 struct hal_wbm_completion_ring_tx { 1908 __le32 buf_va_lo; 1909 __le32 buf_va_hi; 1910 __le32 info0; 1911 __le32 info1; 1912 __le32 info2; 1913 struct hal_tx_rate_stats rate_stats; 1914 __le32 info3; 1915 } __packed; 1916 1917 #define HAL_WBM_RELEASE_TX_INFO0_REL_SRC_MODULE GENMASK(2, 0) 1918 #define HAL_WBM_RELEASE_TX_INFO0_BM_ACTION GENMASK(5, 3) 1919 #define HAL_WBM_RELEASE_TX_INFO0_DESC_TYPE GENMASK(8, 6) 1920 #define HAL_WBM_RELEASE_TX_INFO0_FIRST_MSDU_IDX GENMASK(12, 9) 1921 #define HAL_WBM_RELEASE_TX_INFO0_TQM_RELEASE_REASON GENMASK(18, 13) 1922 #define HAL_WBM_RELEASE_TX_INFO0_RBM_OVERRIDE_VLD BIT(17) 1923 #define HAL_WBM_RELEASE_TX_INFO0_SW_BUFFER_COOKIE_11_0 GENMASK(29, 18) 1924 #define HAL_WBM_RELEASE_TX_INFO0_WBM_INTERNAL_ERROR BIT(31) 1925 1926 #define HAL_WBM_RELEASE_TX_INFO1_TQM_STATUS_NUMBER GENMASK(23, 0) 1927 #define HAL_WBM_RELEASE_TX_INFO1_TRANSMIT_COUNT GENMASK(30, 24) 1928 #define HAL_WBM_RELEASE_TX_INFO1_SW_REL_DETAILS_VALID BIT(31) 1929 1930 #define HAL_WBM_RELEASE_TX_INFO2_ACK_FRAME_RSSI GENMASK(7, 0) 1931 #define HAL_WBM_RELEASE_TX_INFO2_FIRST_MSDU BIT(8) 1932 #define HAL_WBM_RELEASE_TX_INFO2_LAST_MSDU BIT(9) 1933 #define HAL_WBM_RELEASE_TX_INFO2_FW_TX_NOTIF_FRAME GENMASK(12, 10) 1934 #define HAL_WBM_RELEASE_TX_INFO2_BUFFER_TIMESTAMP GENMASK(31, 13) 1935 1936 #define HAL_WBM_RELEASE_TX_INFO3_PEER_ID GENMASK(15, 0) 1937 #define HAL_WBM_RELEASE_TX_INFO3_TID GENMASK(19, 16) 1938 #define HAL_WBM_RELEASE_TX_INFO3_SW_BUFFER_COOKIE_19_12 GENMASK(27, 20) 1939 #define HAL_WBM_RELEASE_TX_INFO3_LOOPING_COUNT GENMASK(31, 28) 1940 1941 struct hal_wbm_release_ring_tx { 1942 struct ath12k_buffer_addr buf_addr_info; 1943 __le32 info0; 1944 __le32 info1; 1945 __le32 info2; 1946 struct hal_tx_rate_stats rate_stats; 1947 __le32 info3; 1948 } __packed; 1949 1950 #define HAL_WBM_RELEASE_RX_INFO0_REL_SRC_MODULE GENMASK(2, 0) 1951 #define HAL_WBM_RELEASE_RX_INFO0_BM_ACTION GENMASK(5, 3) 1952 #define HAL_WBM_RELEASE_RX_INFO0_DESC_TYPE GENMASK(8, 6) 1953 #define HAL_WBM_RELEASE_RX_INFO0_FIRST_MSDU_IDX GENMASK(12, 9) 1954 #define HAL_WBM_RELEASE_RX_INFO0_CC_STATUS BIT(16) 1955 #define HAL_WBM_RELEASE_RX_INFO0_RXDMA_PUSH_REASON GENMASK(18, 17) 1956 #define HAL_WBM_RELEASE_RX_INFO0_RXDMA_ERROR_CODE GENMASK(23, 19) 1957 #define HAL_WBM_RELEASE_RX_INFO0_REO_PUSH_REASON GENMASK(25, 24) 1958 #define HAL_WBM_RELEASE_RX_INFO0_REO_ERROR_CODE GENMASK(30, 26) 1959 #define HAL_WBM_RELEASE_RX_INFO0_WBM_INTERNAL_ERROR BIT(31) 1960 1961 #define HAL_WBM_RELEASE_RX_INFO2_RING_ID GENMASK(27, 20) 1962 #define HAL_WBM_RELEASE_RX_INFO2_LOOPING_COUNT GENMASK(31, 28) 1963 1964 struct hal_wbm_release_ring_rx { 1965 struct ath12k_buffer_addr buf_addr_info; 1966 __le32 info0; 1967 struct rx_mpdu_desc rx_mpdu_info; 1968 struct rx_msdu_desc rx_msdu_info; 1969 __le32 info1; 1970 __le32 info2; 1971 } __packed; 1972 1973 #define HAL_WBM_RELEASE_RX_CC_INFO0_RBM GENMASK(12, 9) 1974 #define HAL_WBM_RELEASE_RX_CC_INFO1_COOKIE GENMASK(27, 8) 1975 /* Used when hw cc is success */ 1976 struct hal_wbm_release_ring_cc_rx { 1977 __le32 buf_va_lo; 1978 __le32 buf_va_hi; 1979 __le32 info0; 1980 struct rx_mpdu_desc rx_mpdu_info; 1981 struct rx_msdu_desc rx_msdu_info; 1982 __le32 buf_pa_lo; 1983 __le32 info1; 1984 } __packed; 1985 1986 #define HAL_WBM_RELEASE_INFO0_REL_SRC_MODULE GENMASK(2, 0) 1987 #define HAL_WBM_RELEASE_INFO0_BM_ACTION GENMASK(5, 3) 1988 #define HAL_WBM_RELEASE_INFO0_DESC_TYPE GENMASK(8, 6) 1989 #define HAL_WBM_RELEASE_INFO0_RXDMA_PUSH_REASON GENMASK(18, 17) 1990 #define HAL_WBM_RELEASE_INFO0_RXDMA_ERROR_CODE GENMASK(23, 19) 1991 #define HAL_WBM_RELEASE_INFO0_REO_PUSH_REASON GENMASK(25, 24) 1992 #define HAL_WBM_RELEASE_INFO0_REO_ERROR_CODE GENMASK(30, 26) 1993 #define HAL_WBM_RELEASE_INFO0_WBM_INTERNAL_ERROR BIT(31) 1994 1995 #define HAL_WBM_RELEASE_INFO3_FIRST_MSDU BIT(0) 1996 #define HAL_WBM_RELEASE_INFO3_LAST_MSDU BIT(1) 1997 #define HAL_WBM_RELEASE_INFO3_CONTINUATION BIT(2) 1998 1999 #define HAL_WBM_RELEASE_INFO5_LOOPING_COUNT GENMASK(31, 28) 2000 2001 struct hal_wbm_release_ring { 2002 struct ath12k_buffer_addr buf_addr_info; 2003 __le32 info0; 2004 __le32 info1; 2005 __le32 info2; 2006 __le32 info3; 2007 __le32 info4; 2008 __le32 info5; 2009 } __packed; 2010 2011 /* hal_wbm_release_ring 2012 * 2013 * Producer: SW/TQM/RXDMA/REO/SWITCH 2014 * Consumer: WBM/SW/FW 2015 * 2016 * HTT tx status is overlaid on wbm_release ring on 4-byte words 2, 3, 4 and 5 2017 * for software based completions. 2018 * 2019 * buf_addr_info 2020 * Details of the physical address of the buffer or link descriptor. 2021 * 2022 * release_source_module 2023 * Indicates which module initiated the release of this buffer/descriptor. 2024 * Values are defined in enum %HAL_WBM_REL_SRC_MODULE_. 2025 * 2026 * buffer_or_desc_type 2027 * Field only valid when WBM is marked as the return_buffer_manager in 2028 * the Released_Buffer_address_info. Indicates that type of buffer or 2029 * descriptor is being released. Values are in enum %HAL_WBM_REL_DESC_TYPE. 2030 * 2031 * wbm_internal_error 2032 * Is set when WBM got a buffer pointer but the action was to push it to 2033 * the idle link descriptor ring or do link related activity OR 2034 * Is set when WBM got a link buffer pointer but the action was to push it 2035 * to the buffer descriptor ring. 2036 * 2037 * looping_count 2038 * A count value that indicates the number of times the 2039 * producer of entries into the Buffer Manager Ring has looped 2040 * around the ring. 2041 * 2042 * At initialization time, this value is set to 0. On the 2043 * first loop, this value is set to 1. After the max value is 2044 * reached allowed by the number of bits for this field, the 2045 * count value continues with 0 again. 2046 * 2047 * In case SW is the consumer of the ring entries, it can 2048 * use this field to figure out up to where the producer of 2049 * entries has created new entries. This eliminates the need to 2050 * check where the head pointer' of the ring is located once 2051 * the SW starts processing an interrupt indicating that new 2052 * entries have been put into this ring... 2053 * 2054 * Also note that SW if it wants only needs to look at the 2055 * LSB bit of this count value. 2056 */ 2057 2058 /** 2059 * enum hal_wbm_tqm_rel_reason - TQM release reason code 2060 * @HAL_WBM_TQM_REL_REASON_FRAME_ACKED: ACK or BACK received for the frame 2061 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU: Command remove_mpdus initiated by SW 2062 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX: Command remove transmitted_mpdus 2063 * initiated by sw. 2064 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX: Command remove untransmitted_mpdus 2065 * initiated by sw. 2066 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES: Command remove aged msdus or 2067 * mpdus. 2068 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1: Remove command initiated by 2069 * fw with fw_reason1. 2070 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2: Remove command initiated by 2071 * fw with fw_reason2. 2072 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3: Remove command initiated by 2073 * fw with fw_reason3. 2074 * @HAL_WBM_TQM_REL_REASON_CMD_DISABLE_QUEUE: Remove command initiated by 2075 * fw with disable queue. 2076 * @HAL_WBM_TQM_REL_REASON_CMD_TILL_NONMATCHING: Remove command initiated by 2077 * fw to remove all mpdu until 1st non-match. 2078 * @HAL_WBM_TQM_REL_REASON_DROP_THRESHOLD: Dropped due to drop threshold 2079 * criteria 2080 * @HAL_WBM_TQM_REL_REASON_DROP_LINK_DESC_UNAVAIL: Dropped due to link desc 2081 * not available 2082 * @HAL_WBM_TQM_REL_REASON_DROP_OR_INVALID_MSDU: Dropped due drop bit set or 2083 * null flow 2084 * @HAL_WBM_TQM_REL_REASON_MULTICAST_DROP: Dropped due mcast drop set for VDEV 2085 * @HAL_WBM_TQM_REL_REASON_VDEV_MISMATCH_DROP: Dropped due to being set with 2086 * 'TCL_drop_reason' 2087 */ 2088 enum hal_wbm_tqm_rel_reason { 2089 HAL_WBM_TQM_REL_REASON_FRAME_ACKED, 2090 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU, 2091 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX, 2092 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX, 2093 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES, 2094 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1, 2095 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2, 2096 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3, 2097 HAL_WBM_TQM_REL_REASON_CMD_DISABLE_QUEUE, 2098 HAL_WBM_TQM_REL_REASON_CMD_TILL_NONMATCHING, 2099 HAL_WBM_TQM_REL_REASON_DROP_THRESHOLD, 2100 HAL_WBM_TQM_REL_REASON_DROP_LINK_DESC_UNAVAIL, 2101 HAL_WBM_TQM_REL_REASON_DROP_OR_INVALID_MSDU, 2102 HAL_WBM_TQM_REL_REASON_MULTICAST_DROP, 2103 HAL_WBM_TQM_REL_REASON_VDEV_MISMATCH_DROP, 2104 }; 2105 2106 struct hal_wbm_buffer_ring { 2107 struct ath12k_buffer_addr buf_addr_info; 2108 }; 2109 2110 enum hal_mon_end_reason { 2111 HAL_MON_STATUS_BUFFER_FULL, 2112 HAL_MON_FLUSH_DETECTED, 2113 HAL_MON_END_OF_PPDU, 2114 HAL_MON_PPDU_TRUNCATED, 2115 }; 2116 2117 #define HAL_SW_MONITOR_RING_INFO0_RXDMA_PUSH_REASON GENMASK(1, 0) 2118 #define HAL_SW_MONITOR_RING_INFO0_RXDMA_ERROR_CODE GENMASK(6, 2) 2119 #define HAL_SW_MONITOR_RING_INFO0_MPDU_FRAGMENT_NUMBER GENMASK(10, 7) 2120 #define HAL_SW_MONITOR_RING_INFO0_FRAMELESS_BAR BIT(11) 2121 #define HAL_SW_MONITOR_RING_INFO0_STATUS_BUF_COUNT GENMASK(15, 12) 2122 #define HAL_SW_MONITOR_RING_INFO0_END_OF_PPDU BIT(16) 2123 2124 #define HAL_SW_MONITOR_RING_INFO1_PHY_PPDU_ID GENMASK(15, 0) 2125 #define HAL_SW_MONITOR_RING_INFO1_RING_ID GENMASK(27, 20) 2126 #define HAL_SW_MONITOR_RING_INFO1_LOOPING_COUNT GENMASK(31, 28) 2127 2128 struct hal_sw_monitor_ring { 2129 struct ath12k_buffer_addr buf_addr_info; 2130 struct rx_mpdu_desc rx_mpdu_info; 2131 struct ath12k_buffer_addr status_buff_addr_info; 2132 __le32 info0; /* %HAL_SW_MONITOR_RING_INFO0 */ 2133 __le32 info1; /* %HAL_SW_MONITOR_RING_INFO1 */ 2134 } __packed; 2135 2136 /* hal_sw_monitor_ring 2137 * 2138 * Producer: RXDMA 2139 * Consumer: REO/SW/FW 2140 * buf_addr_info 2141 * Details of the physical address of a buffer or MSDU 2142 * link descriptor. 2143 * 2144 * rx_mpdu_info 2145 * Details related to the MPDU being pushed to SW, valid 2146 * only if end_of_ppdu is set to 0. 2147 * 2148 * status_buff_addr_info 2149 * Details of the physical address of the first status 2150 * buffer used for the PPDU (either the PPDU that included the 2151 * MPDU being pushed to SW if end_of_ppdu = 0, or the PPDU 2152 * whose end is indicated through end_of_ppdu = 1) 2153 * 2154 * rxdma_push_reason 2155 * Indicates why RXDMA pushed the frame to this ring 2156 * 2157 * <enum 0 rxdma_error_detected> RXDMA detected an error an 2158 * pushed this frame to this queue 2159 * 2160 * <enum 1 rxdma_routing_instruction> RXDMA pushed the 2161 * frame to this queue per received routing instructions. No 2162 * error within RXDMA was detected 2163 * 2164 * <enum 2 rxdma_rx_flush> RXDMA received an RX_FLUSH. As a 2165 * result the MSDU link descriptor might not have the 2166 * last_msdu_in_mpdu_flag set, but instead WBM might just see a 2167 * NULL pointer in the MSDU link descriptor. This is to be 2168 * considered a normal condition for this scenario. 2169 * 2170 * rxdma_error_code 2171 * Field only valid when rxdma_push_reason is set to 2172 * 'rxdma_error_detected.' 2173 * 2174 * <enum 0 rxdma_overflow_err>MPDU frame is not complete 2175 * due to a FIFO overflow error in RXPCU. 2176 * 2177 * <enum 1 rxdma_mpdu_length_err>MPDU frame is not complete 2178 * due to receiving incomplete MPDU from the PHY 2179 * 2180 * <enum 3 rxdma_decrypt_err>CRYPTO reported a decryption 2181 * error or CRYPTO received an encrypted frame, but did not get 2182 * a valid corresponding key id in the peer entry. 2183 * 2184 * <enum 4 rxdma_tkip_mic_err>CRYPTO reported a TKIP MIC 2185 * error 2186 * 2187 * <enum 5 rxdma_unecrypted_err>CRYPTO reported an 2188 * unencrypted frame error when encrypted was expected 2189 * 2190 * <enum 6 rxdma_msdu_len_err>RX OLE reported an MSDU 2191 * length error 2192 * 2193 * <enum 7 rxdma_msdu_limit_err>RX OLE reported that max 2194 * number of MSDUs allowed in an MPDU got exceeded 2195 * 2196 * <enum 8 rxdma_wifi_parse_err>RX OLE reported a parsing 2197 * error 2198 * 2199 * <enum 9 rxdma_amsdu_parse_err>RX OLE reported an A-MSDU 2200 * parsing error 2201 * 2202 * <enum 10 rxdma_sa_timeout_err>RX OLE reported a timeout 2203 * during SA search 2204 * 2205 * <enum 11 rxdma_da_timeout_err>RX OLE reported a timeout 2206 * during DA search 2207 * 2208 * <enum 12 rxdma_flow_timeout_err>RX OLE reported a 2209 * timeout during flow search 2210 * 2211 * <enum 13 rxdma_flush_request>RXDMA received a flush 2212 * request 2213 * 2214 * <enum 14 rxdma_amsdu_fragment_err>Rx PCU reported A-MSDU 2215 * present as well as a fragmented MPDU. 2216 * 2217 * mpdu_fragment_number 2218 * Field only valid when Reo_level_mpdu_frame_info. 2219 * Rx_mpdu_desc_info_details.Fragment_flag is set and 2220 * end_of_ppdu is set to 0. 2221 * 2222 * The fragment number from the 802.11 header. 2223 * 2224 * Note that the sequence number is embedded in the field: 2225 * Reo_level_mpdu_frame_info. Rx_mpdu_desc_info_details. 2226 * Mpdu_sequence_number 2227 * 2228 * frameless_bar 2229 * When set, this SW monitor ring struct contains BAR info 2230 * from a multi TID BAR frame. The original multi TID BAR frame 2231 * itself contained all the REO info for the first TID, but all 2232 * the subsequent TID info and their linkage to the REO 2233 * descriptors is passed down as 'frameless' BAR info. 2234 * 2235 * The only fields valid in this descriptor when this bit 2236 * is within the 2237 * 2238 * Reo_level_mpdu_frame_info: 2239 * Within Rx_mpdu_desc_info_details: 2240 * Mpdu_Sequence_number 2241 * BAR_frame 2242 * Peer_meta_data 2243 * All other fields shall be set to 0. 2244 * 2245 * status_buf_count 2246 * A count of status buffers used so far for the PPDU 2247 * (either the PPDU that included the MPDU being pushed to SW 2248 * if end_of_ppdu = 0, or the PPDU whose end is indicated 2249 * through end_of_ppdu = 1) 2250 * 2251 * end_of_ppdu 2252 * Some hw RXDMA can be configured to generate a separate 2253 * 'SW_MONITOR_RING' descriptor at the end of a PPDU (either 2254 * through an 'RX_PPDU_END' TLV or through an 'RX_FLUSH') to 2255 * demarcate PPDUs. 2256 * 2257 * For such a descriptor, this bit is set to 1 and fields 2258 * Reo_level_mpdu_frame_info, mpdu_fragment_number and 2259 * Frameless_bar are all set to 0. 2260 * 2261 * Otherwise this bit is set to 0. 2262 * 2263 * phy_ppdu_id 2264 * A PPDU counter value that PHY increments for every PPDU 2265 * received 2266 * 2267 * The counter value wraps around. Some hw RXDMA can be 2268 * configured to copy this from the RX_PPDU_START TLV for every 2269 * output descriptor. 2270 * 2271 * ring_id 2272 * For debugging. 2273 * This field is filled in by the SRNG module. 2274 * It help to identify the ring that is being looked 2275 * 2276 * looping_count 2277 * For debugging. 2278 * This field is filled in by the SRNG module. 2279 * 2280 * A count value that indicates the number of times the 2281 * producer of entries into this Ring has looped around the 2282 * ring. 2283 * At initialization time, this value is set to 0. On the 2284 * first loop, this value is set to 1. After the max value is 2285 * reached allowed by the number of bits for this field, the 2286 * count value continues with 0 again. 2287 * 2288 * In case SW is the consumer of the ring entries, it can 2289 * use this field to figure out up to where the producer of 2290 * entries has created new entries. This eliminates the need to 2291 * check where the head pointer' of the ring is located once 2292 * the SW starts processing an interrupt indicating that new 2293 * entries have been put into this ring... 2294 */ 2295 2296 enum hal_desc_owner { 2297 HAL_DESC_OWNER_WBM, 2298 HAL_DESC_OWNER_SW, 2299 HAL_DESC_OWNER_TQM, 2300 HAL_DESC_OWNER_RXDMA, 2301 HAL_DESC_OWNER_REO, 2302 HAL_DESC_OWNER_SWITCH, 2303 }; 2304 2305 enum hal_desc_buf_type { 2306 HAL_DESC_BUF_TYPE_TX_MSDU_LINK, 2307 HAL_DESC_BUF_TYPE_TX_MPDU_LINK, 2308 HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_HEAD, 2309 HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_EXT, 2310 HAL_DESC_BUF_TYPE_TX_FLOW, 2311 HAL_DESC_BUF_TYPE_TX_BUFFER, 2312 HAL_DESC_BUF_TYPE_RX_MSDU_LINK, 2313 HAL_DESC_BUF_TYPE_RX_MPDU_LINK, 2314 HAL_DESC_BUF_TYPE_RX_REO_QUEUE, 2315 HAL_DESC_BUF_TYPE_RX_REO_QUEUE_EXT, 2316 HAL_DESC_BUF_TYPE_RX_BUFFER, 2317 HAL_DESC_BUF_TYPE_IDLE_LINK, 2318 }; 2319 2320 #define HAL_DESC_REO_OWNED 4 2321 #define HAL_DESC_REO_QUEUE_DESC 8 2322 #define HAL_DESC_REO_QUEUE_EXT_DESC 9 2323 #define HAL_DESC_REO_NON_QOS_TID 16 2324 2325 #define HAL_DESC_HDR_INFO0_OWNER GENMASK(3, 0) 2326 #define HAL_DESC_HDR_INFO0_BUF_TYPE GENMASK(7, 4) 2327 #define HAL_DESC_HDR_INFO0_DBG_RESERVED GENMASK(31, 8) 2328 2329 struct hal_desc_header { 2330 __le32 info0; 2331 } __packed; 2332 2333 struct hal_rx_mpdu_link_ptr { 2334 struct ath12k_buffer_addr addr_info; 2335 } __packed; 2336 2337 struct hal_rx_msdu_details { 2338 struct ath12k_buffer_addr buf_addr_info; 2339 struct rx_msdu_desc rx_msdu_info; 2340 struct rx_msdu_ext_desc rx_msdu_ext_info; 2341 } __packed; 2342 2343 #define HAL_RX_MSDU_LNK_INFO0_RX_QUEUE_NUMBER GENMASK(15, 0) 2344 #define HAL_RX_MSDU_LNK_INFO0_FIRST_MSDU_LNK BIT(16) 2345 2346 struct hal_rx_msdu_link { 2347 struct hal_desc_header desc_hdr; 2348 struct ath12k_buffer_addr buf_addr_info; 2349 __le32 info0; 2350 __le32 pn[4]; 2351 struct hal_rx_msdu_details msdu_link[6]; 2352 } __packed; 2353 2354 struct hal_rx_reo_queue_ext { 2355 struct hal_desc_header desc_hdr; 2356 __le32 rsvd; 2357 struct hal_rx_mpdu_link_ptr mpdu_link[15]; 2358 } __packed; 2359 2360 /* hal_rx_reo_queue_ext 2361 * Consumer: REO 2362 * Producer: REO 2363 * 2364 * descriptor_header 2365 * Details about which module owns this struct. 2366 * 2367 * mpdu_link 2368 * Pointer to the next MPDU_link descriptor in the MPDU queue. 2369 */ 2370 2371 enum hal_rx_reo_queue_pn_size { 2372 HAL_RX_REO_QUEUE_PN_SIZE_24, 2373 HAL_RX_REO_QUEUE_PN_SIZE_48, 2374 HAL_RX_REO_QUEUE_PN_SIZE_128, 2375 }; 2376 2377 #define HAL_RX_REO_QUEUE_RX_QUEUE_NUMBER GENMASK(15, 0) 2378 2379 #define HAL_RX_REO_QUEUE_INFO0_VLD BIT(0) 2380 #define HAL_RX_REO_QUEUE_INFO0_ASSOC_LNK_DESC_COUNTER GENMASK(2, 1) 2381 #define HAL_RX_REO_QUEUE_INFO0_DIS_DUP_DETECTION BIT(3) 2382 #define HAL_RX_REO_QUEUE_INFO0_SOFT_REORDER_EN BIT(4) 2383 #define HAL_RX_REO_QUEUE_INFO0_AC GENMASK(6, 5) 2384 #define HAL_RX_REO_QUEUE_INFO0_BAR BIT(7) 2385 #define HAL_RX_REO_QUEUE_INFO0_RETRY BIT(8) 2386 #define HAL_RX_REO_QUEUE_INFO0_CHECK_2K_MODE BIT(9) 2387 #define HAL_RX_REO_QUEUE_INFO0_OOR_MODE BIT(10) 2388 #define HAL_RX_REO_QUEUE_INFO0_BA_WINDOW_SIZE GENMASK(20, 11) 2389 #define HAL_RX_REO_QUEUE_INFO0_PN_CHECK BIT(21) 2390 #define HAL_RX_REO_QUEUE_INFO0_EVEN_PN BIT(22) 2391 #define HAL_RX_REO_QUEUE_INFO0_UNEVEN_PN BIT(23) 2392 #define HAL_RX_REO_QUEUE_INFO0_PN_HANDLE_ENABLE BIT(24) 2393 #define HAL_RX_REO_QUEUE_INFO0_PN_SIZE GENMASK(26, 25) 2394 #define HAL_RX_REO_QUEUE_INFO0_IGNORE_AMPDU_FLG BIT(27) 2395 2396 #define HAL_RX_REO_QUEUE_INFO1_SVLD BIT(0) 2397 #define HAL_RX_REO_QUEUE_INFO1_SSN GENMASK(12, 1) 2398 #define HAL_RX_REO_QUEUE_INFO1_CURRENT_IDX GENMASK(22, 13) 2399 #define HAL_RX_REO_QUEUE_INFO1_SEQ_2K_ERR BIT(23) 2400 #define HAL_RX_REO_QUEUE_INFO1_PN_ERR BIT(24) 2401 #define HAL_RX_REO_QUEUE_INFO1_PN_VALID BIT(31) 2402 2403 #define HAL_RX_REO_QUEUE_INFO2_MPDU_COUNT GENMASK(6, 0) 2404 #define HAL_RX_REO_QUEUE_INFO2_MSDU_COUNT (31, 7) 2405 2406 #define HAL_RX_REO_QUEUE_INFO3_TIMEOUT_COUNT GENMASK(9, 4) 2407 #define HAL_RX_REO_QUEUE_INFO3_FWD_DUE_TO_BAR_CNT GENMASK(15, 10) 2408 #define HAL_RX_REO_QUEUE_INFO3_DUPLICATE_COUNT GENMASK(31, 16) 2409 2410 #define HAL_RX_REO_QUEUE_INFO4_FRAME_IN_ORD_COUNT GENMASK(23, 0) 2411 #define HAL_RX_REO_QUEUE_INFO4_BAR_RECVD_COUNT GENMASK(31, 24) 2412 2413 #define HAL_RX_REO_QUEUE_INFO5_LATE_RX_MPDU_COUNT GENMASK(11, 0) 2414 #define HAL_RX_REO_QUEUE_INFO5_WINDOW_JUMP_2K GENMASK(15, 12) 2415 #define HAL_RX_REO_QUEUE_INFO5_HOLE_COUNT GENMASK(31, 16) 2416 2417 struct hal_rx_reo_queue { 2418 struct hal_desc_header desc_hdr; 2419 __le32 rx_queue_num; 2420 __le32 info0; 2421 __le32 info1; 2422 __le32 pn[4]; 2423 __le32 last_rx_enqueue_timestamp; 2424 __le32 last_rx_dequeue_timestamp; 2425 __le32 next_aging_queue[2]; 2426 __le32 prev_aging_queue[2]; 2427 __le32 rx_bitmap[9]; 2428 __le32 info2; 2429 __le32 info3; 2430 __le32 info4; 2431 __le32 processed_mpdus; 2432 __le32 processed_msdus; 2433 __le32 processed_total_bytes; 2434 __le32 info5; 2435 __le32 rsvd[2]; 2436 struct hal_rx_reo_queue_ext ext_desc[]; 2437 } __packed; 2438 2439 /* hal_rx_reo_queue 2440 * 2441 * descriptor_header 2442 * Details about which module owns this struct. Note that sub field 2443 * Buffer_type shall be set to receive_reo_queue_descriptor. 2444 * 2445 * receive_queue_number 2446 * Indicates the MPDU queue ID to which this MPDU link descriptor belongs. 2447 * 2448 * vld 2449 * Valid bit indicating a session is established and the queue descriptor 2450 * is valid. 2451 * associated_link_descriptor_counter 2452 * Indicates which of the 3 link descriptor counters shall be incremented 2453 * or decremented when link descriptors are added or removed from this 2454 * flow queue. 2455 * disable_duplicate_detection 2456 * When set, do not perform any duplicate detection. 2457 * soft_reorder_enable 2458 * When set, REO has been instructed to not perform the actual re-ordering 2459 * of frames for this queue, but just to insert the reorder opcodes. 2460 * ac 2461 * Indicates the access category of the queue descriptor. 2462 * bar 2463 * Indicates if BAR has been received. 2464 * retry 2465 * Retry bit is checked if this bit is set. 2466 * chk_2k_mode 2467 * Indicates what type of operation is expected from Reo when the received 2468 * frame SN falls within the 2K window. 2469 * oor_mode 2470 * Indicates what type of operation is expected when the received frame 2471 * falls within the OOR window. 2472 * ba_window_size 2473 * Indicates the negotiated (window size + 1). Max of 256 bits. 2474 * 2475 * A value 255 means 256 bitmap, 63 means 64 bitmap, 0 (means non-BA 2476 * session, with window size of 0). The 3 values here are the main values 2477 * validated, but other values should work as well. 2478 * 2479 * A BA window size of 0 (=> one frame entry bitmat), means that there is 2480 * no additional rx_reo_queue_ext desc. following rx_reo_queue in memory. 2481 * A BA window size of 1 - 105, means that there is 1 rx_reo_queue_ext. 2482 * A BA window size of 106 - 210, means that there are 2 rx_reo_queue_ext. 2483 * A BA window size of 211 - 256, means that there are 3 rx_reo_queue_ext. 2484 * pn_check_needed, pn_shall_be_even, pn_shall_be_uneven, pn_handling_enable, 2485 * pn_size 2486 * REO shall perform the PN increment check, even number check, uneven 2487 * number check, PN error check and size of the PN field check. 2488 * ignore_ampdu_flag 2489 * REO shall ignore the ampdu_flag on entrance descriptor for this queue. 2490 * 2491 * svld 2492 * Sequence number in next field is valid one. 2493 * ssn 2494 * Starting Sequence number of the session. 2495 * current_index 2496 * Points to last forwarded packet 2497 * seq_2k_error_detected_flag 2498 * REO has detected a 2k error jump in the sequence number and from that 2499 * moment forward, all new frames are forwarded directly to FW, without 2500 * duplicate detect, reordering, etc. 2501 * pn_error_detected_flag 2502 * REO has detected a PN error. 2503 */ 2504 2505 #define HAL_REO_UPD_RX_QUEUE_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) 2506 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RX_QUEUE_NUM BIT(8) 2507 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_VLD BIT(9) 2508 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_ASSOC_LNK_DESC_CNT BIT(10) 2509 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_DIS_DUP_DETECTION BIT(11) 2510 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SOFT_REORDER_EN BIT(12) 2511 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_AC BIT(13) 2512 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BAR BIT(14) 2513 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RETRY BIT(15) 2514 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_CHECK_2K_MODE BIT(16) 2515 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_OOR_MODE BIT(17) 2516 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BA_WINDOW_SIZE BIT(18) 2517 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_CHECK BIT(19) 2518 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_EVEN_PN BIT(20) 2519 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_UNEVEN_PN BIT(21) 2520 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_HANDLE_ENABLE BIT(22) 2521 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_SIZE BIT(23) 2522 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_IGNORE_AMPDU_FLG BIT(24) 2523 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SVLD BIT(25) 2524 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SSN BIT(26) 2525 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SEQ_2K_ERR BIT(27) 2526 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_ERR BIT(28) 2527 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_VALID BIT(29) 2528 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN BIT(30) 2529 2530 #define HAL_REO_UPD_RX_QUEUE_INFO1_RX_QUEUE_NUMBER GENMASK(15, 0) 2531 #define HAL_REO_UPD_RX_QUEUE_INFO1_VLD BIT(16) 2532 #define HAL_REO_UPD_RX_QUEUE_INFO1_ASSOC_LNK_DESC_COUNTER GENMASK(18, 17) 2533 #define HAL_REO_UPD_RX_QUEUE_INFO1_DIS_DUP_DETECTION BIT(19) 2534 #define HAL_REO_UPD_RX_QUEUE_INFO1_SOFT_REORDER_EN BIT(20) 2535 #define HAL_REO_UPD_RX_QUEUE_INFO1_AC GENMASK(22, 21) 2536 #define HAL_REO_UPD_RX_QUEUE_INFO1_BAR BIT(23) 2537 #define HAL_REO_UPD_RX_QUEUE_INFO1_RETRY BIT(24) 2538 #define HAL_REO_UPD_RX_QUEUE_INFO1_CHECK_2K_MODE BIT(25) 2539 #define HAL_REO_UPD_RX_QUEUE_INFO1_OOR_MODE BIT(26) 2540 #define HAL_REO_UPD_RX_QUEUE_INFO1_PN_CHECK BIT(27) 2541 #define HAL_REO_UPD_RX_QUEUE_INFO1_EVEN_PN BIT(28) 2542 #define HAL_REO_UPD_RX_QUEUE_INFO1_UNEVEN_PN BIT(29) 2543 #define HAL_REO_UPD_RX_QUEUE_INFO1_PN_HANDLE_ENABLE BIT(30) 2544 #define HAL_REO_UPD_RX_QUEUE_INFO1_IGNORE_AMPDU_FLG BIT(31) 2545 2546 #define HAL_REO_UPD_RX_QUEUE_INFO2_BA_WINDOW_SIZE GENMASK(9, 0) 2547 #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_SIZE GENMASK(11, 10) 2548 #define HAL_REO_UPD_RX_QUEUE_INFO2_SVLD BIT(12) 2549 #define HAL_REO_UPD_RX_QUEUE_INFO2_SSN GENMASK(24, 13) 2550 #define HAL_REO_UPD_RX_QUEUE_INFO2_SEQ_2K_ERR BIT(25) 2551 #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_ERR BIT(26) 2552 #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_VALID BIT(27) 2553 2554 struct hal_reo_update_rx_queue { 2555 struct hal_reo_cmd_hdr cmd; 2556 __le32 queue_addr_lo; 2557 __le32 info0; 2558 __le32 info1; 2559 __le32 info2; 2560 __le32 pn[4]; 2561 } __packed; 2562 2563 struct hal_rx_reo_queue_1k { 2564 struct hal_desc_header desc_hdr; 2565 __le32 rx_bitmap_1023_288[23]; 2566 __le32 reserved[8]; 2567 } __packed; 2568 2569 #define HAL_REO_UNBLOCK_CACHE_INFO0_UNBLK_CACHE BIT(0) 2570 #define HAL_REO_UNBLOCK_CACHE_INFO0_RESOURCE_IDX GENMASK(2, 1) 2571 2572 struct hal_reo_unblock_cache { 2573 struct hal_reo_cmd_hdr cmd; 2574 __le32 info0; 2575 __le32 rsvd[7]; 2576 } __packed; 2577 2578 enum hal_reo_exec_status { 2579 HAL_REO_EXEC_STATUS_SUCCESS, 2580 HAL_REO_EXEC_STATUS_BLOCKED, 2581 HAL_REO_EXEC_STATUS_FAILED, 2582 HAL_REO_EXEC_STATUS_RESOURCE_BLOCKED, 2583 }; 2584 2585 #define HAL_REO_STATUS_HDR_INFO0_STATUS_NUM GENMASK(15, 0) 2586 #define HAL_REO_STATUS_HDR_INFO0_EXEC_TIME GENMASK(25, 16) 2587 #define HAL_REO_STATUS_HDR_INFO0_EXEC_STATUS GENMASK(27, 26) 2588 2589 struct hal_reo_status_hdr { 2590 __le32 info0; 2591 __le32 timestamp; 2592 } __packed; 2593 2594 /* hal_reo_status_hdr 2595 * Producer: REO 2596 * Consumer: SW 2597 * 2598 * status_num 2599 * The value in this field is equal to value of the reo command 2600 * number. This field helps to correlate the statuses with the REO 2601 * commands. 2602 * 2603 * execution_time (in us) 2604 * The amount of time REO took to execute the command. Note that 2605 * this time does not include the duration of the command waiting 2606 * in the command ring, before the execution started. 2607 * 2608 * execution_status 2609 * Execution status of the command. Values are defined in 2610 * enum %HAL_REO_EXEC_STATUS_. 2611 */ 2612 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_SSN GENMASK(11, 0) 2613 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_CUR_IDX GENMASK(21, 12) 2614 2615 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MPDU_COUNT GENMASK(6, 0) 2616 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MSDU_COUNT GENMASK(31, 7) 2617 2618 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_WINDOW_JMP2K GENMASK(3, 0) 2619 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_TIMEOUT_COUNT GENMASK(9, 4) 2620 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_FDTB_COUNT GENMASK(15, 10) 2621 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_DUPLICATE_COUNT GENMASK(31, 16) 2622 2623 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_FIO_COUNT GENMASK(23, 0) 2624 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_BAR_RCVD_CNT GENMASK(31, 24) 2625 2626 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_LATE_RX_MPDU GENMASK(11, 0) 2627 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_HOLE_COUNT GENMASK(27, 12) 2628 2629 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO5_LOOPING_CNT GENMASK(31, 28) 2630 2631 struct hal_reo_get_queue_stats_status { 2632 struct hal_reo_status_hdr hdr; 2633 __le32 info0; 2634 __le32 pn[4]; 2635 __le32 last_rx_enqueue_timestamp; 2636 __le32 last_rx_dequeue_timestamp; 2637 __le32 rx_bitmap[9]; 2638 __le32 info1; 2639 __le32 info2; 2640 __le32 info3; 2641 __le32 num_mpdu_frames; 2642 __le32 num_msdu_frames; 2643 __le32 total_bytes; 2644 __le32 info4; 2645 __le32 info5; 2646 } __packed; 2647 2648 /* hal_reo_get_queue_stats_status 2649 * Producer: REO 2650 * Consumer: SW 2651 * 2652 * status_hdr 2653 * Details that can link this status with the original command. It 2654 * also contains info on how long REO took to execute this command. 2655 * 2656 * ssn 2657 * Starting Sequence number of the session, this changes whenever 2658 * window moves (can be filled by SW then maintained by REO). 2659 * 2660 * current_index 2661 * Points to last forwarded packet. 2662 * 2663 * pn 2664 * Bits of the PN number. 2665 * 2666 * last_rx_enqueue_timestamp 2667 * last_rx_dequeue_timestamp 2668 * Timestamp of arrival of the last MPDU for this queue and 2669 * Timestamp of forwarding an MPDU accordingly. 2670 * 2671 * rx_bitmap 2672 * When a bit is set, the corresponding frame is currently held 2673 * in the re-order queue. The bitmap is Fully managed by HW. 2674 * 2675 * current_mpdu_count 2676 * current_msdu_count 2677 * The number of MPDUs and MSDUs in the queue. 2678 * 2679 * timeout_count 2680 * The number of times REO started forwarding frames even though 2681 * there is a hole in the bitmap. Forwarding reason is timeout. 2682 * 2683 * forward_due_to_bar_count 2684 * The number of times REO started forwarding frames even though 2685 * there is a hole in the bitmap. Fwd reason is reception of BAR. 2686 * 2687 * duplicate_count 2688 * The number of duplicate frames that have been detected. 2689 * 2690 * frames_in_order_count 2691 * The number of frames that have been received in order (without 2692 * a hole that prevented them from being forwarded immediately). 2693 * 2694 * bar_received_count 2695 * The number of times a BAR frame is received. 2696 * 2697 * mpdu_frames_processed_count 2698 * msdu_frames_processed_count 2699 * The total number of MPDU/MSDU frames that have been processed. 2700 * 2701 * total_bytes 2702 * An approximation of the number of bytes received for this queue. 2703 * 2704 * late_receive_mpdu_count 2705 * The number of MPDUs received after the window had already moved 2706 * on. The 'late' sequence window is defined as 2707 * (Window SSN - 256) - (Window SSN - 1). 2708 * 2709 * window_jump_2k 2710 * The number of times the window moved more than 2K 2711 * 2712 * hole_count 2713 * The number of times a hole was created in the receive bitmap. 2714 * 2715 * looping_count 2716 * A count value that indicates the number of times the producer of 2717 * entries into this Ring has looped around the ring. 2718 */ 2719 2720 #define HAL_REO_STATUS_LOOP_CNT GENMASK(31, 28) 2721 2722 #define HAL_REO_FLUSH_QUEUE_INFO0_ERR_DETECTED BIT(0) 2723 #define HAL_REO_FLUSH_QUEUE_INFO0_RSVD GENMASK(31, 1) 2724 #define HAL_REO_FLUSH_QUEUE_INFO1_RSVD GENMASK(27, 0) 2725 2726 struct hal_reo_flush_queue_status { 2727 struct hal_reo_status_hdr hdr; 2728 __le32 info0; 2729 __le32 rsvd0[21]; 2730 __le32 info1; 2731 } __packed; 2732 2733 /* hal_reo_flush_queue_status 2734 * Producer: REO 2735 * Consumer: SW 2736 * 2737 * status_hdr 2738 * Details that can link this status with the original command. It 2739 * also contains info on how long REO took to execute this command. 2740 * 2741 * error_detected 2742 * Status of blocking resource 2743 * 2744 * 0 - No error has been detected while executing this command 2745 * 1 - Error detected. The resource to be used for blocking was 2746 * already in use. 2747 * 2748 * looping_count 2749 * A count value that indicates the number of times the producer of 2750 * entries into this Ring has looped around the ring. 2751 */ 2752 2753 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_IS_ERR BIT(0) 2754 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_BLOCK_ERR_CODE GENMASK(2, 1) 2755 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_STATUS_HIT BIT(8) 2756 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_DESC_TYPE GENMASK(11, 9) 2757 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_CLIENT_ID GENMASK(15, 12) 2758 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_ERR GENMASK(17, 16) 2759 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_COUNT GENMASK(25, 18) 2760 2761 struct hal_reo_flush_cache_status { 2762 struct hal_reo_status_hdr hdr; 2763 __le32 info0; 2764 __le32 rsvd0[21]; 2765 __le32 info1; 2766 } __packed; 2767 2768 /* hal_reo_flush_cache_status 2769 * Producer: REO 2770 * Consumer: SW 2771 * 2772 * status_hdr 2773 * Details that can link this status with the original command. It 2774 * also contains info on how long REO took to execute this command. 2775 * 2776 * error_detected 2777 * Status for blocking resource handling 2778 * 2779 * 0 - No error has been detected while executing this command 2780 * 1 - An error in the blocking resource management was detected 2781 * 2782 * block_error_details 2783 * only valid when error_detected is set 2784 * 2785 * 0 - No blocking related errors found 2786 * 1 - Blocking resource is already in use 2787 * 2 - Resource requested to be unblocked, was not blocked 2788 * 2789 * cache_controller_flush_status_hit 2790 * The status that the cache controller returned on executing the 2791 * flush command. 2792 * 2793 * 0 - miss; 1 - hit 2794 * 2795 * cache_controller_flush_status_desc_type 2796 * Flush descriptor type 2797 * 2798 * cache_controller_flush_status_client_id 2799 * Module who made the flush request 2800 * 2801 * In REO, this is always 0 2802 * 2803 * cache_controller_flush_status_error 2804 * Error condition 2805 * 2806 * 0 - No error found 2807 * 1 - HW interface is still busy 2808 * 2 - Line currently locked. Used for one line flush command 2809 * 3 - At least one line is still locked. 2810 * Used for cache flush command. 2811 * 2812 * cache_controller_flush_count 2813 * The number of lines that were actually flushed out 2814 * 2815 * looping_count 2816 * A count value that indicates the number of times the producer of 2817 * entries into this Ring has looped around the ring. 2818 */ 2819 2820 #define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_IS_ERR BIT(0) 2821 #define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_TYPE BIT(1) 2822 2823 struct hal_reo_unblock_cache_status { 2824 struct hal_reo_status_hdr hdr; 2825 __le32 info0; 2826 __le32 rsvd0[21]; 2827 __le32 info1; 2828 } __packed; 2829 2830 /* hal_reo_unblock_cache_status 2831 * Producer: REO 2832 * Consumer: SW 2833 * 2834 * status_hdr 2835 * Details that can link this status with the original command. It 2836 * also contains info on how long REO took to execute this command. 2837 * 2838 * error_detected 2839 * 0 - No error has been detected while executing this command 2840 * 1 - The blocking resource was not in use, and therefore it could 2841 * not be unblocked. 2842 * 2843 * unblock_type 2844 * Reference to the type of unblock command 2845 * 0 - Unblock a blocking resource 2846 * 1 - The entire cache usage is unblock 2847 * 2848 * looping_count 2849 * A count value that indicates the number of times the producer of 2850 * entries into this Ring has looped around the ring. 2851 */ 2852 2853 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_IS_ERR BIT(0) 2854 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_LIST_EMPTY BIT(1) 2855 2856 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_REL_DESC_COUNT GENMASK(15, 0) 2857 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_FWD_BUF_COUNT GENMASK(31, 16) 2858 2859 struct hal_reo_flush_timeout_list_status { 2860 struct hal_reo_status_hdr hdr; 2861 __le32 info0; 2862 __le32 info1; 2863 __le32 rsvd0[20]; 2864 __le32 info2; 2865 } __packed; 2866 2867 /* hal_reo_flush_timeout_list_status 2868 * Producer: REO 2869 * Consumer: SW 2870 * 2871 * status_hdr 2872 * Details that can link this status with the original command. It 2873 * also contains info on how long REO took to execute this command. 2874 * 2875 * error_detected 2876 * 0 - No error has been detected while executing this command 2877 * 1 - Command not properly executed and returned with error 2878 * 2879 * timeout_list_empty 2880 * When set, REO has depleted the timeout list and all entries are 2881 * gone. 2882 * 2883 * release_desc_count 2884 * Producer: SW; Consumer: REO 2885 * The number of link descriptor released 2886 * 2887 * forward_buf_count 2888 * Producer: SW; Consumer: REO 2889 * The number of buffers forwarded to the REO destination rings 2890 * 2891 * looping_count 2892 * A count value that indicates the number of times the producer of 2893 * entries into this Ring has looped around the ring. 2894 */ 2895 2896 #define HAL_REO_DESC_THRESH_STATUS_INFO0_THRESH_INDEX GENMASK(1, 0) 2897 #define HAL_REO_DESC_THRESH_STATUS_INFO1_LINK_DESC_COUNTER0 GENMASK(23, 0) 2898 #define HAL_REO_DESC_THRESH_STATUS_INFO2_LINK_DESC_COUNTER1 GENMASK(23, 0) 2899 #define HAL_REO_DESC_THRESH_STATUS_INFO3_LINK_DESC_COUNTER2 GENMASK(23, 0) 2900 #define HAL_REO_DESC_THRESH_STATUS_INFO4_LINK_DESC_COUNTER_SUM GENMASK(25, 0) 2901 2902 struct hal_reo_desc_thresh_reached_status { 2903 struct hal_reo_status_hdr hdr; 2904 __le32 info0; 2905 __le32 info1; 2906 __le32 info2; 2907 __le32 info3; 2908 __le32 info4; 2909 __le32 rsvd0[17]; 2910 __le32 info5; 2911 } __packed; 2912 2913 /* hal_reo_desc_thresh_reached_status 2914 * Producer: REO 2915 * Consumer: SW 2916 * 2917 * status_hdr 2918 * Details that can link this status with the original command. It 2919 * also contains info on how long REO took to execute this command. 2920 * 2921 * threshold_index 2922 * The index of the threshold register whose value got reached 2923 * 2924 * link_descriptor_counter0 2925 * link_descriptor_counter1 2926 * link_descriptor_counter2 2927 * link_descriptor_counter_sum 2928 * Value of the respective counters at generation of this message 2929 * 2930 * looping_count 2931 * A count value that indicates the number of times the producer of 2932 * entries into this Ring has looped around the ring. 2933 */ 2934 2935 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_DATA_LENGTH GENMASK(13, 0) 2936 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_L4_CSUM_STATUS BIT(14) 2937 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_L3_CSUM_STATUS BIT(15) 2938 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_PID GENMASK(27, 24) 2939 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_QDISC BIT(28) 2940 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_MULTICAST BIT(29) 2941 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_MORE BIT(30) 2942 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_VALID_TOGGLE BIT(31) 2943 2944 struct hal_tcl_entrance_from_ppe_ring { 2945 __le32 buffer_addr; 2946 __le32 info0; 2947 } __packed; 2948 2949 struct hal_mon_buf_ring { 2950 __le32 paddr_lo; 2951 __le32 paddr_hi; 2952 __le64 cookie; 2953 }; 2954 2955 /* hal_mon_buf_ring 2956 * Producer : SW 2957 * Consumer : Monitor 2958 * 2959 * paddr_lo 2960 * Lower 32-bit physical address of the buffer pointer from the source ring. 2961 * paddr_hi 2962 * bit range 7-0 : upper 8 bit of the physical address. 2963 * bit range 31-8 : reserved. 2964 * cookie 2965 * Consumer: RxMon/TxMon 64 bit cookie of the buffers. 2966 */ 2967 2968 #define HAL_MON_DEST_COOKIE_BUF_ID GENMASK(17, 0) 2969 2970 #define HAL_MON_DEST_INFO0_END_OFFSET GENMASK(11, 0) 2971 #define HAL_MON_DEST_INFO0_FLUSH_DETECTED BIT(16) 2972 #define HAL_MON_DEST_INFO0_END_OF_PPDU BIT(17) 2973 #define HAL_MON_DEST_INFO0_INITIATOR BIT(18) 2974 #define HAL_MON_DEST_INFO0_EMPTY_DESC BIT(19) 2975 #define HAL_MON_DEST_INFO0_RING_ID GENMASK(27, 20) 2976 #define HAL_MON_DEST_INFO0_LOOPING_COUNT GENMASK(31, 28) 2977 2978 struct hal_mon_dest_desc { 2979 __le32 cookie; 2980 __le32 reserved; 2981 __le32 ppdu_id; 2982 __le32 info0; 2983 }; 2984 2985 /* hal_mon_dest_ring 2986 * Producer : TxMon/RxMon 2987 * Consumer : SW 2988 * cookie 2989 * bit 0 -17 buf_id to track the skb's vaddr. 2990 * ppdu_id 2991 * Phy ppdu_id 2992 * end_offset 2993 * The offset into status buffer where DMA ended, ie., offset to the last 2994 * TLV + last TLV size. 2995 * flush_detected 2996 * Indicates whether 'tx_flush' or 'rx_flush' occurred. 2997 * end_of_ppdu 2998 * Indicates end of ppdu. 2999 * pmac_id 3000 * Indicates PMAC that received from frame. 3001 * empty_descriptor 3002 * This descriptor is written on flush or end of ppdu or end of status 3003 * buffer. 3004 * ring_id 3005 * updated by SRNG. 3006 * looping_count 3007 * updated by SRNG. 3008 */ 3009 3010 #define HAL_TX_MSDU_METADATA_INFO0_ENCRYPT_FLAG BIT(8) 3011 #define HAL_TX_MSDU_METADATA_INFO0_ENCRYPT_TYPE GENMASK(16, 15) 3012 #define HAL_TX_MSDU_METADATA_INFO0_HOST_TX_DESC_POOL BIT(31) 3013 3014 struct hal_tx_msdu_metadata { 3015 __le32 info0; 3016 __le32 rsvd0[6]; 3017 } __packed; 3018 3019 /* hal_tx_msdu_metadata 3020 * valid_encrypt_type 3021 * if set, encrypt type is valid 3022 * encrypt_type 3023 * 0 = NO_ENCRYPT, 3024 * 1 = ENCRYPT, 3025 * 2 ~ 3 - Reserved 3026 * host_tx_desc_pool 3027 * If set, Firmware allocates tx_descriptors 3028 * in WAL_BUFFERID_TX_HOST_DATA_EXP,instead 3029 * of WAL_BUFFERID_TX_TCL_DATA_EXP. 3030 * Use cases: 3031 * Any time firmware uses TQM-BYPASS for Data 3032 * TID, firmware expect host to set this bit. 3033 */ 3034 3035 #endif /* ATH12K_HAL_DESC_H */ 3036