/kernel/linux/linux-5.10/Documentation/devicetree/bindings/bus/ |
D | qcom,ebi2.txt | 24 CS0 GPIO134 0x1a800000-0x1b000000 (8MB) 25 CS1 GPIO39 (A) / GPIO123 (B) 0x1b000000-0x1b800000 (8MB) 26 CS2 GPIO40 (A) / GPIO124 (B) 0x1b800000-0x1c000000 (8MB) 27 CS3 GPIO133 0x1d000000-0x25000000 (128 MB) 28 CS4 GPIO132 0x1c800000-0x1d000000 (8MB) 29 CS5 GPIO131 0x1c000000-0x1c800000 (8MB) 58 ranges = <0 0x0 0x1a800000 0x00800000>, 59 <1 0x0 0x1b000000 0x00800000>, 60 <2 0x0 0x1b800000 0x00800000>, 61 <3 0x0 0x1d000000 0x08000000>, [all …]
|
/kernel/linux/linux-5.10/arch/mips/include/asm/mach-ath79/ |
D | ar71xx_regs.h | 19 #define AR71XX_APB_BASE 0x18000000 20 #define AR71XX_GE0_BASE 0x19000000 21 #define AR71XX_GE0_SIZE 0x10000 22 #define AR71XX_GE1_BASE 0x1a000000 23 #define AR71XX_GE1_SIZE 0x10000 24 #define AR71XX_EHCI_BASE 0x1b000000 25 #define AR71XX_EHCI_SIZE 0x1000 26 #define AR71XX_OHCI_BASE 0x1c000000 27 #define AR71XX_OHCI_SIZE 0x1000 28 #define AR71XX_SPI_BASE 0x1f000000 [all …]
|
/kernel/linux/linux-5.10/Documentation/devicetree/bindings/arm/mediatek/ |
D | mediatek,ipesys.txt | 20 reg = <0 0x1b000000 0 0x1000>;
|
D | mediatek,ethsys.txt | 24 reg = <0 0x1b000000 0 0x1000>;
|
/kernel/linux/linux-5.10/Documentation/devicetree/bindings/dma/ |
D | apm-xgene-dma.txt | 27 clocks = <&socplldiv2 0>; 28 reg = <0x0 0x1f27c000 0x0 0x1000>; 36 reg = <0x0 0x1f270000 0x0 0x10000>, 37 <0x0 0x1f200000 0x0 0x10000>, 38 <0x0 0x1b000000 0x0 0x400000>, 39 <0x0 0x1054a000 0x0 0x100>; 40 interrupts = <0x0 0x82 0x4>, 41 <0x0 0xb8 0x4>, 42 <0x0 0xb9 0x4>, 43 <0x0 0xba 0x4>, [all …]
|
/kernel/linux/linux-5.10/arch/arm/configs/ |
D | lpc18xx_defconfig | 23 CONFIG_DRAM_BASE=0x28000000 24 CONFIG_DRAM_SIZE=0x02000000 25 CONFIG_FLASH_MEM_BASE=0x1b000000 26 CONFIG_FLASH_SIZE=0x00080000 27 CONFIG_ZBOOT_ROM_TEXT=0x0 28 CONFIG_ZBOOT_ROM_BSS=0x0
|
/kernel/linux/linux-5.10/Documentation/devicetree/bindings/memory-controllers/ |
D | ingenic,nemc.yaml | 14 pattern: "^memory-controller@[0-9a-f]+$" 40 ".*@[0-9]+$": 91 reg = <0x13410000 0x10000>; 94 ranges = <1 0 0x1b000000 0x1000000>, 95 <2 0 0x1a000000 0x1000000>, 96 <3 0 0x19000000 0x1000000>, 97 <4 0 0x18000000 0x1000000>, 98 <5 0 0x17000000 0x1000000>, 99 <6 0 0x16000000 0x1000000>; 108 pinctrl-0 = <&pins_nemc_cs6>; [all …]
|
/kernel/linux/linux-5.10/Documentation/devicetree/bindings/mtd/ |
D | ingenic,nand.yaml | 61 reg = <0x13410000 0x10000>; 64 ranges = <1 0 0x1b000000 0x1000000>, 65 <2 0 0x1a000000 0x1000000>, 66 <3 0 0x19000000 0x1000000>, 67 <4 0 0x18000000 0x1000000>, 68 <5 0 0x17000000 0x1000000>, 69 <6 0 0x16000000 0x1000000>; 75 reg = <1 0 0x1000000>; 78 #size-cells = <0>; 89 pinctrl-0 = <&pins_nemc>; [all …]
|
/kernel/linux/linux-5.10/arch/arc/boot/dts/ |
D | axc001.dtsi | 23 ranges = <0x00000000 0x0 0xf0000000 0x10000000>; 26 #clock-cells = <0>; 32 #clock-cells = <0>; 49 reg = < 0x2000 0x80 >; 51 #size-cells = <0>; 53 ictl_intc: gpio-controller@0 { 58 reg = <0>; 68 reg = <0x5000 0x100>; 97 reg = < 0x0 0xe0012000 0x0 0x200 >; 106 reg = <0x0 0x80000000 0x0 0x1b000000>; /* (512 - 32) MiB */ [all …]
|
/kernel/linux/linux-5.10/arch/mips/alchemy/devboards/ |
D | db1000.c | 50 return 0; in db1000_board_setup() 57 if ((slot < 12) || (slot > 13) || pin == 0) in db1500_map_pci_irq() 60 return (pin == 1) ? AU1500_PCI_INTA : 0xff; in db1500_map_pci_irq() 75 [0] = { 77 .end = AU1500_PCI_PHYS_ADDR + 0xfff, 89 .id = 0, 100 [0] = { 102 .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1, 114 .id = 0, 124 [0] = { [all …]
|
/kernel/linux/linux-5.10/arch/mips/boot/dts/qca/ |
D | ar9331.dtsi | 12 #size-cells = <0>; 14 cpu@0 { 18 reg = <0>; 34 #clock-cells = <0>; 57 reg = <0x18000000 0x100>; 64 reg = <0x18020000 0x14>; 76 reg = <0x18040000 0x34>; 92 reg = <0x18050000 0x100>; 102 reg = <0x18060010 0x8>; 113 reg = <0x1806001c 0x4>; [all …]
|
/kernel/linux/linux-5.10/arch/arm/mach-integrator/ |
D | hardware.h | 14 #define IO_BASE 0xF0000000 // VA of IO 15 #define IO_SIZE 0x0B000000 // How much? 20 #define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE) 30 #define INTEGRATOR_BOOT_ROM_LO 0x00000000 31 #define INTEGRATOR_BOOT_ROM_HI 0x20000000 45 #define INTEGRATOR_SSRAM_BASE 0x00000000 46 #define INTEGRATOR_SSRAM_ALIAS_BASE 0x10800000 49 #define INTEGRATOR_FLASH_BASE 0x24000000 52 #define INTEGRATOR_MBRD_SSRAM_BASE 0x28000000 58 #define INTEGRATOR_SDRAM_BASE 0x00040000 [all …]
|
/kernel/linux/linux-5.10/arch/arm64/boot/dts/apm/ |
D | apm-storm.dtsi | 16 #size-cells = <0>; 18 cpu@0 { 21 reg = <0x0 0x000>; 23 cpu-release-addr = <0x1 0x0000fff8>; 29 reg = <0x0 0x001>; 31 cpu-release-addr = <0x1 0x0000fff8>; 37 reg = <0x0 0x100>; 39 cpu-release-addr = <0x1 0x0000fff8>; 45 reg = <0x0 0x101>; 47 cpu-release-addr = <0x1 0x0000fff8>; [all …]
|
/kernel/linux/linux-5.10/arch/arm64/include/asm/ |
D | insn.h | 22 * 0 0 - - Unallocated 23 * 1 0 0 - Data processing, immediate 24 * 1 0 1 - Branch, exception generation and system instructions 25 * - 1 - 0 Loads and stores 26 * - 1 0 1 Data processing - register 27 * 0 1 1 1 Data processing - SIMD and floating point 42 AARCH64_INSN_HINT_NOP = 0x0 << 5, 43 AARCH64_INSN_HINT_YIELD = 0x1 << 5, 44 AARCH64_INSN_HINT_WFE = 0x2 << 5, 45 AARCH64_INSN_HINT_WFI = 0x3 << 5, [all …]
|
/kernel/linux/linux-5.10/arch/mips/boot/dts/ingenic/ |
D | jz4780.dtsi | 13 #size-cells = <0>; 15 cpu0: cpu@0 { 17 compatible = "ingenic,xburst-fpu1.0-mxu1.1"; 18 reg = <0>; 26 compatible = "ingenic,xburst-fpu1.0-mxu1.1"; 35 #address-cells = <0>; 43 reg = <0x10001000 0x50>; 54 #clock-cells = <0>; 59 #clock-cells = <0>; 65 reg = <0x10000000 0x100>; [all …]
|
/kernel/linux/linux-5.10/arch/mips/sni/ |
D | rm200.c | 37 MEMPORT(0x160003f8, RM200_I8259A_IRQ_BASE + 4), 38 MEMPORT(0x160002f8, RM200_I8259A_IRQ_BASE + 3), 52 .start = 0x1cd41ffc, 53 .end = 0x1cd41fff, 66 .start = 0x18000000, 67 .end = 0x180fffff, 71 .start = 0x1b000000, 72 .end = 0x1b000004, 76 .start = 0x1ff00000, 77 .end = 0x1ff00020, [all …]
|
/kernel/linux/linux-5.10/arch/arm/boot/dts/ |
D | mt7629.dtsi | 24 #size-cells = <0>; 27 cpu0: cpu@0 { 30 reg = <0x0>; 38 reg = <0x1>; 51 clk20m: oscillator-0 { 53 #clock-cells = <0>; 60 #clock-cells = <0>; 83 reg = <0x10000000 0x1000>; 89 reg = <0x10002000 0x1000>; 97 reg = <0x10006000 0x1000>; [all …]
|
D | qcom-msm8660.dtsi | 18 #size-cells = <0>; 20 cpu@0 { 24 reg = <0>; 44 reg = <0x0 0x0>; 49 interrupts = <1 9 0x304>; 55 #clock-cells = <0>; 61 #clock-cells = <0>; 67 #clock-cells = <0>; 79 io-channels = <&xoadc 0x00 0x01>, /* Battery */ 80 <&xoadc 0x00 0x02>, /* DC in (charger) */ [all …]
|
D | mt2701.dtsi | 25 #size-cells = <0>; 28 cpu@0 { 31 reg = <0x0>; 36 reg = <0x1>; 41 reg = <0x2>; 46 reg = <0x3>; 57 reg = <0 0x80002000 0 0x1000>; 64 #clock-cells = <0>; 70 #clock-cells = <0>; 73 clk26m: oscillator@0 { [all …]
|
/kernel/linux/linux-5.10/drivers/net/usb/ |
D | lan78xx.h | 9 #define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0 10 #define USB_VENDOR_REQUEST_READ_REGISTER 0xA1 11 #define USB_VENDOR_REQUEST_GET_STATS 0xA2 32 #define TX_CMD_A_IGE_ (0x20000000) 33 #define TX_CMD_A_ICE_ (0x10000000) 34 #define TX_CMD_A_LSO_ (0x08000000) 35 #define TX_CMD_A_IPE_ (0x04000000) 36 #define TX_CMD_A_TPE_ (0x02000000) 37 #define TX_CMD_A_IVTG_ (0x01000000) 38 #define TX_CMD_A_RVTG_ (0x00800000) [all …]
|
/kernel/linux/linux-5.10/arch/mips/boot/dts/img/ |
D | pistachio.dtsi | 23 #size-cells = <0>; 25 cpu0: cpu@0 { 28 reg = <0>; 46 reg = <0x18100000 0x200>; 56 pinctrl-0 = <&i2c0_pins>; 59 #size-cells = <0>; 64 reg = <0x18100200 0x200>; 74 pinctrl-0 = <&i2c1_pins>; 77 #size-cells = <0>; 82 reg = <0x18100400 0x200>; [all …]
|
/kernel/linux/linux-5.10/arch/arm64/boot/dts/mediatek/ |
D | mt7622.dtsi | 69 #size-cells = <0>; 71 cpu0: cpu@0 { 74 reg = <0x0 0x0>; 88 reg = <0x0 0x1>; 103 #clock-cells = <0>; 108 #clock-cells = <0>; 132 reg = <0 0x43000000 0 0x30000>; 142 thermal-sensors = <&thermal 0>; 208 reg = <0 0x10000000 0 0x1000>; 215 reg = <0 0x10001000 0 0x250>; [all …]
|
/kernel/linux/linux-5.10/arch/hexagon/kernel/ |
D | vm_init_segtable.S | 16 * Start with mapping PA=0 to both VA=0x0 and VA=0xc000000 as 16MB large pages. 46 /* VA 0x00000000 */ 59 /* VA 0x40000000 */ 68 /* VA 0x80000000 */ 74 /*0xa8*/.word X,X,X,X 77 /*0xa9*/.word BKPG_IO(0xa9000000),BKPG_IO(0xa9000000),BKPG_IO(0xa9000000),BKPG_IO(0xa9000000) 79 /*0xa9*/.word X,X,X,X 81 /*0xaa*/.word X,X,X,X 82 /*0xab*/.word X,X,X,X 83 /*0xac*/.word X,X,X,X [all …]
|
/kernel/linux/linux-5.10/drivers/net/wireless/intersil/prism54/ |
D | oid_mgt.c | 24 int c = 0; in channel_of_freq() 29 return (c >= 14) ? 0 : ++c; in channel_of_freq() 33 return 0; in channel_of_freq() 36 #define OID_STRUCT(name,oid,s,t) [name] = {oid, 0, sizeof(s), t} 43 #define OID_UNKNOWN(name,oid) OID_STRUCT(name,oid,0,0) 46 OID_STRUCT(GEN_OID_MACADDRESS, 0x00000000, u8[6], OID_TYPE_ADDR), 47 OID_U32(GEN_OID_LINKSTATE, 0x00000001), 48 OID_UNKNOWN(GEN_OID_WATCHDOG, 0x00000002), 49 OID_UNKNOWN(GEN_OID_MIBOP, 0x00000003), 50 OID_UNKNOWN(GEN_OID_OPTIONS, 0x00000004), [all …]
|
/kernel/linux/linux-5.10/crypto/ |
D | aes_generic.c | 67 0xa56363c6, 0x847c7cf8, 0x997777ee, 0x8d7b7bf6, 68 0x0df2f2ff, 0xbd6b6bd6, 0xb16f6fde, 0x54c5c591, 69 0x50303060, 0x03010102, 0xa96767ce, 0x7d2b2b56, 70 0x19fefee7, 0x62d7d7b5, 0xe6abab4d, 0x9a7676ec, 71 0x45caca8f, 0x9d82821f, 0x40c9c989, 0x877d7dfa, 72 0x15fafaef, 0xeb5959b2, 0xc947478e, 0x0bf0f0fb, 73 0xecadad41, 0x67d4d4b3, 0xfda2a25f, 0xeaafaf45, 74 0xbf9c9c23, 0xf7a4a453, 0x967272e4, 0x5bc0c09b, 75 0xc2b7b775, 0x1cfdfde1, 0xae93933d, 0x6a26264c, 76 0x5a36366c, 0x413f3f7e, 0x02f7f7f5, 0x4fcccc83, [all …]
|